Spacely Construction Company

Spacely Construction Company

George Jetson, an employee of Spacely Construction Company, claims to have injured his back as a result of a fall while repairing the roof at of the 1313 Mockingbird Lane Apartments. He filed a lawsuit against Herman Munster, the owner of 1313 Mockingbird Lane Apartments, asking for damages of $1,500,000. George claims that the roof had rotten sections and that his fall could have been prevented if Mr. Munster had told Spacely Construction about the problem. Mr. Munster notified his insurance company, Dewey, Cheatem and Howe Insurance (DCH), of the lawsuit. DCH must defend Mr. Munster and decide what action to take regarding the lawsuit.
Some depositions and a series of discussions took place between both sides. As a result, George Jetson offered to accept a settlement of $750,000. Thus, one option is for DCH to pay George $750,000 to settle the claim. DCH is also considering making George a counteroffer of $400,000 in the hope that he will accept a lesser amount to avoid the time and cost of a trial. DCH’s preliminary investigation shows that George’s case is strong; DCH is concerned that George may reject their counteroffer and request a jury trial. DCH’s lawyer spent some time exploring George’s likely reaction if they make a counteroffer of $400,000.
The lawyer concluded that its is adequate to consider three possible outcomes to represents George’s possible reaction to a counteroffer of $400,000: (1) George will accept the counteroffer and the case will be closed; (2) George will reject the counteroffer and elect to have a jury decide the settlement amount; or (3) George will make a counteroffer to DCH of $600,000. If George does make a counteroffer, DCH decided that they will not make additional counteroffers. They will either accept George’s counteroffer of $600,000 or go to trial.
If the case goes to a jury trial, DCH considers three outcomes possible: (1) the jury may reject George’s claim and DCH will not be required to pay any damages; (2) the jury will find in favor of George and award his $750,000 in damages; or (3) the jury will conclude that George has a strong case and award him the full amount of $1,500,000.
Key considerations as DCH develops its strategy for disposing of the case are the probabilities associated with George’s response to a DCH counteroffer of $400,000 and the probabilities associated with the three possible trail outcomes. DCH’s lawyers believe the probability that George will accept the counteroffer of $400,000 is 0.10, the probability that George will reject the counteroffer of $400,000 is 0.40, and the probability that George will, himself, make a counteroffer to DCH of $600,000 is 0.50. If the case goes to court, they believe that the probability the jury will award George damages of $1,500,00 is 0.30, the probability that the jury will award George damages of $750,000 is 0.50 and the probability that the jury will award George nothing is 0.20.
Perform an analysis of the problem facing Dewey, Cheatem and Howe Insurance. Summarize your findings and recommendations as to how to proceed.

Communication Skill Assessment

Communication Skill Assessment

Communication Skill Assessment 

Most of us have situations in which we find it difficult to communicate. Improving your written communication skills and being comfortable speaking to people are extremely important. Develop a two- to three-page APA-formatted paper in which you analyze your personal communication skills. Be sure to address the following:

Describe the assessment you used to analyze your skills.
Discuss your communication gaps.
Describe any additional training you need in specific areas of communication.
Analyze how you can improve your current communication skills to prepare you for advancement in your profession.
Your paper must be two to three pages (not including title and reference pages) and must be formatted according to APA style as outlined in the approved APA style guide. You must cite three to four scholarly sources in addition to the textbook. 

service industry.

service industry.

Select a Fortune 500 international company in the service industry. Using your selected company as the basis for your research, prepare a paper that will:

Describe the main line of business of the company
Name four of the countries in which the company operates
Explain, in detail, the implementation of the 4P's marketing mix concept by the company
Describe any differences observed in the implementation of this concept, from one country to another.
Present your findings as a 4-5 pages Word document formatted in APA style.

Submit your assignment.

Submitting your assignment in APA format means, at a minimum, you will need the following:

TITLE PAGE. Remember the Running head: AND TITLE IN ALL CAPITALS
ABSTRACT. A summary of your paper…not an introduction. Begin writing in third person voice.
BODY. The body of your paper begins on the page following the title page and abstract page and must be double-spaced (be careful not to triple- or quadruple-space between paragraphs). The type face should be 12-pt. Times Roman or 12-pt. Courier in regular black type. Do not use color, bold type, or italics except as required for APA level headings and references. The deliverable length of the body of your paper for this assignment is 4-5 pages. In-body academic citations to support your decisions and analysis are required. A variety of academic sources is encouraged.
REFERENCE PAGE. References that align with your in-body academic sources are listed on the final page of your paper. The references must be in APA format using appropriate spacing, hang indention, italics, and upper and lower case usage as appropriate for the type of resource used. Remember, the Reference Page is not a bibliography but a further listing of the abbreviated in-body citations used in the paper. Every referenced item must have a corresponding in-body citation.

question 1-what elements and qualities make drama unique as a literary form

question 1-what elements and qualities make drama unique as a literary form

Chapter Thirteen discusses the major elements of drama and distinguishes the form from other genres like the short story and poetry. Using the play Riders to the Sea (Synge) as an example, discuss what elements and qualities make drama unique as a literary form. Support your ideas with textual evidence from Synge’s play. In your post, take into consideration how the literary themes of Riders to the Sea relate to the dramatic form. 
 
Your initial post should be at least 150 words in length. Support your claims with examples from the text/play, and properly cite any references. Respond to at least two of your classmates’ 

Phase 2: Class: ACCT614-1304B-02 : Applied Managerial Accounting

Phase 2: Class: ACCT614-1304B-02 : Applied Managerial Accounting

Phase 2 - Task 1

Task Type:
	

Discussion Board

Deliverable Length:
	

1,500–1,750 words (not including title or reference pages)

 

Reminder: Initial Discussion Board posts due by Wednesday

Assignment

As EEC's corporate business financial analyst, you will need to have a clear understanding of the different types of costs (variable, fixed, and mixed) that the company carries. Complete the following for this assignment:

    Review EEC's journal activity.
    Define and identify its variable, fixed, and mixed costs.
    Determine what affect a sales volume increase or decrease will have on unit fixed cost, unit variable cost, total fixed cost, and total variable cost.

Attached is EEC's journal activity.

In your own words, please post a response to the Discussion Board and comment on other postings. You will be graded on the quality of your postings.

 

Phase 2 - Task 2

Task Type:
	

Individual Project

Deliverable Length:
	

1,750–2,000 words (not including title and reference pages)

 
	

 

 
	

 

Weekly tasks or assignments (Individual or Group Projects) will be due by Saturday and late submissions will be assigned a late penalty in accordance with the late penalty policy found in the syllabus. NOTE: All submission posting times are based on midnight Central Time.

EEC has introduced a new 1.5 gigabyte (GB) computer memory chip.

    Should EEC use a job-order costing system, which is a costing system where costs are collected and assigned to units of production for each individual job, or a process costing system, which is a costing system that accumulates production costs by process or department for a given period of time, to report the costs of this new product?
        How are the systems different? 
    Describe how the selected system would work to track the costs of the product.
    Identify the cost driver, and explain the process of tracking the costs.
    Provide examples of products that EEC might offer for which a job-order costing system would be appropriate.
    Provide examples of products that EEC might offer for which a process costing system would be appropriate. 

Please submit your assignment.

 

Phase 2 - Task 3

Task Type:
	

Group Project

Deliverable Length:
	

See assignment details

Due Date:
	

12/10/2013 11:59:59 PM

 

Weekly tasks or assignments (Individual or Group Projects) will be due by Monday and late submissions will be assigned a late penalty in accordance with the late penalty policy found in the syllabus. NOTE: All submission posting times are based on midnight Central Time.

EEC currently uses a basic standard cost system. Management knows very little about other concepts of costing and the benefits of having multiple costing methods. Your superior has asked that you and your team put together a presentation to management explaining various costing concepts as they relate to EEC (explain the usage and benefits of each).

Individual Portion (1,750–2,000 words)

As an EEC corporate business financial analyst, you must have an expert understanding of the various costing methods. Within your groups, divide the costing concepts among the individual team members to analyze and become an expert in at least 1 costing concept within your group. Then, write a paper to include the following:

    The definition of the concept
    How and when the concept could be used by EEC
    How the application of the concept differs from the other concepts
    Its advantages and disadvantages as they relate to EEC 

Choose from the following costing concepts:

    Full costing/absorption costing
    Variable costing
    Target costing
    Life-cycle costing
    Activity-based costing 

Please add your file.

Group Project (12–15 slides)

Based on the information in the Individual Project, put together a slide presentation to management that includes a summary of your research for each costing concept. Include the following:

    The definition of each costing concept
    Where and how EEC could apply each concept
    The benefit EEC could gain from using each of these costing methods 

This presentation should provide recommendations to management on implementing multiple costing methods.

For more information on creating PowerPoint Presentations, please visit the PowerPoint Guide in the Student Success Learning Lab.

Please add your file.

Discuss the various elements of strategic leadership.

Discuss the various elements of strategic leadership.

1.Discuss the various elements of strategic leadership.
2.Do you believe that one’s propensity to become a leader is an acquired skill or that the ability to be a leader is something that individuals are born with?
3.How well do you know yourself? Think through a top 5 list of your personal leadership strengths and weaknesses.
4.Once you have identified these strengths and weaknesses describe a specific action plan to leverage your strengths and minimize weaknesses.

TCP/IP for Networking IP Header Lab

TCP/IP for Networking IP Header Lab

TCP/IP for Networking

IP Header Lab

Name:       
Date:       

Please use Protocol Expert to answer the questions and fill-in-the-blanks for the statements.

Hint:  You need to look for two specific types of frames.

1.	The purpose of the Version/Header Length field is to define the length of the IP header and      .
2.	Do the contents of the Total Length field define the length of the IP header and the data field or does it define the length of the frame?       
3.	If the content of the Protocol ID field contains       the next header that follows the IP Header is a UDP header.
4.	Which field would you consider the last field of the IP Header is no Options are present?       
5.	Will the checksum of the IP header equal the contents of the FCS of the frame?          If not, why?       
6.	There are 9 fields in the ARP header.  Which field determines if it is a request or a reply?           If it is a reply, what is the content of that field?       
7.	In an ARP request, what type of protocol is being used on layer 3?        
8.	The Identification field in the IP header is used by what operation of IP?       
9.	If the content of the TTL field equals 1 and the frame has not reach the destination network, what will happen to the frame?       
10.	What is the content of the Type field of a layer two header if the frame is being used to determine the MAC address of the destination?       
11.	What are the fourteen fields of the IPv4 header?
a.	     
b.	     
c.	     
d.	     
e.	     
f.	     
g.	     
h.	     
i.	     
j.	     
k.	     
l.	     
m.	     
n.	     
12.	What field is responsible for determining what metric is used for choosing a path to the destination network?       
13.	What field is used to reassemble a data stream from the fragments created by the source host?       
14.	Is the content of the Identification field generated randomly or is it a predetermined value determined by the IPv4 protocol?       
15.	Of the packets captured by the protocol analyzer, what is the value of the Fragmentation Offset field?         Is this determined by the segmentation of the data stream or by the fragmentation by the IPv4 protocol?       
16.	What is the value of the Don’t Fragment field if TCP segments the data stream?         What will happen to the packet if it reaches a router that must divide the packet into smaller pieces before forwarding the packet to its destination network?       
17.	What is the value contained in the Protocol ID field if the packet is carrying OSPF information?       
18.	Will IPv4 process the information of a packet if the checksum is incorrect?         If it does not process the information of the packet, what will the host do with the packet?       
19.	What type of packet will most likely contain options in the IPv4 header according to information provided in the lecture on the IPv4 header?       
20.	What is the length of a header without options?         What is the length of a header with options?       

I need help with this exam. You match the terms with…

I need help with this exam. You match the terms with…

I need help with this exam. You match the terms with their definition. This class is immunology class, the text book we are using is The Immune System, Peter Parham, 3rd Edition, Garland Publishing,


Exam 1.docx  Download Attachment

This is an unformatted preview. Please download the attached document for the original format.
uclear transcription factor activated by cytokine response to 
produce inflammatory cytokines.
1.

Commens
ual 
species

2.

Opportunistic 
pathogens

3.

Defensins

4.

GALT

5.

C3b

6.

CD59

7.

MAC

8.

TLRs

9.

LPS

10. NFkappaB
11. LFA­1:ICAM­1
12. CRP

Save
Question 3 (20 points)
 
Match genes, terms, proteins for chapters 3 and 4.  You may use your note cards and my lecture notes for this question.  
Only one choice per match.
Question 3 options:

Key genes for somatic recombination, these
are transcribed only in lymphocytes.

1.

Primary 
Immune 
Response

2.

Secondary Immune 
Response

Adaptive response that follows if pathogen 
breaches skin, provides a first exposure to 
an antigen­­this response takes some time.

3.

Clonal Selection

4.

Negative Selection

Process that increases numbers of B and T 
cells that recognize a specific pathogen

5.

CDR3

6.

Epitope

7.

Somatic Recombination

8.

RAG

Process of enhanced diversification of V­
Domain coding sequences­­occurs after 
initial B cell activation.

9.

P and N Nucleotides

Process of cutting, splicing and random 
recombination that produces diversity for 
antigen recognition.

11. Somatic Hypermutation

Palindromic and Nontemplated­­these 
nucleotides fill in randomly to create more 
diversity in CDR3

Adaptive response that follows if the 
antigen has been previously seen­­this 
response is fast.

The shape recognized by an antibody, this 
is also the shape that leads to the MHC 
presentation for T cell receptors.
Key function of certain antibodies and 
complement components to coat pathogens
and thus inactivate them.

10. Isotype Switching

12. Opsins/Opsinization

Stage in T­Cell development where T cells 
that recognize self are targeted for 
Apoptosis.
Hypervariable loop key for recognizing 
antigens.
Process where antibody can be modified 
(not antigen binding region) to produce 
alternative effector functions.

Save
Question 4 (20 points)
 
Match terms, genes and proteins for chapters 5 and 8.  Only one choice per match.  Note cards and my lecture notes ok!
Question 4 options:

Master Professional Antigen Presenting Cell
(white gloves and all)
Cell surface molecules from professional 
antigen presentiing cell that interact with T 
cells.
This T­cell receptor binds the B7 ligand.
Lingand (related to immunoglobulin family) 
that binds the CD28 co­receptor.
is found on antigen presenting cells and 
indicates a positive infection.
This cell signaling molecule transduced the 
T­cell activation initiated by antigen 
presenting by way of phosphorylation.
Antigen processing components used for 
MHC­1 presentation; Antigen processing 
components used for MHC­­II presentation.
Nucleotide sequences recognized by RAG 
genes for somatic recombination; Key genes,
ony expressed in B and T cells that are 

RSS; RAG 1 
and 2

1.
2.

CD4; CD8

3.

MHC­I; MHC­II

4.

Proteasome, TAP, 
ERAP, Calnexin; 
Invariant chain, CLIP

5.

Allotype; Genetic 
polymorphism

6.

MHC Restriction

7.

HLA­1A, HLA 1B, HLA­
1C

8.

Dendritic Cell

9.

LFA­1:ICAM­2, 
CD2:LFA­3

10. B7

thought to have evolved from transposons.
HLA isotypes with the greatest extent of 
polymorphism.
Proteins produced by different forms of a 
given gene; Where muliple alternative forms 
of a gene exist in a given population.
Co­receptor for helper T cells; Co­receptor 
for cytotoxic T cells.

11. Zap 70
12. CD28

Antigen presentation that indicates 
intracellular pathogen; Antigen presentation 
that indicates extracellular pathogen.
Where a T­cell receptor is specific to a 
complex of both the MHC and antigen 
presentation for activation.

Save
Question 5 (4 points)
 
Please see Figure 2.20 (shown on slide 11 of chapter 2 lecture notes).  This figure shows the Toll­like receptors.  They are 
highlighted on the opening video for this chapter!  Which of the following are true for these key components of the Innate 
Immune system?
Question 5 options:

These receptors are signaling molecules.  The family members are specific for 
different microbes.  Our text describes at least 9 different TLRs in this family that 
provide detection of specific microorganisms. 
When activated, these TLRs will activate cell signaling processes that lead to 
cytokine responses.  For example, when LPS is recognized by TLR4, a kinase 
cascade results in the nuclear localization of a key transcription factor (NFkappa 
Beta) that will activate the transcription of inflammatory cytokines.
Toll Like Receptors only sense microbes on  the outer surfaces of cells.
1 and 2
2 and 3
All answers are correct

Save
Question 6 (4 points)
 
Please see Figures 3.8 and 3.9 from our text.  These are shown on slide 8 of the Chapter 2 lecture.  These two classes of 
antigen­presenting molecules are critical for our well­being and the stars of our Davis novel. In fact, our text states that MHC
genes are "the best­known examples of highly polymorphic genes". Which of the following statements are true for these key 
molecules?
Question 6 options:

MHC Class I molecules present to CD8 T cells and in addition to binding the T cell 
receptor, these bind the CD8 co­receptor.  CD8 T cells are cytotoxic T cells.
MHC Class II molecules present to CD4 T cells and in addition to binding the T cell
receptor, these bind the CD4 co­receptor.  CD4 cells are helper T cells.
MHC Class I molecules present antigens from intracellular pathogens (viruses for 
example) while MHC Class II molecules present antigens from extracellular 
pathogens (bacterial, viral, fungal and even parasites).
MHC class I molecules are expressed by all cells (except for Red Blood Cells) in 
the body, while MHC class II molecules are only expressed on dendritic cells,  
macrophages and B cells. 
1, 2 and 3
All answers are correct. 
Save
Question 7 (4 points)
 
Our text states that "The number of different antibodies that can be produced by the human body seem to be virtually 
limitless".  Key to creating the diversity witin the antigen binding sites (Slide 7 of chapter 4 lecture) are the result of random 
recombination of gene segments.  The RAG genes are key for creating this process.  Please see Slide 15 from the chapter 4
lecture that shows Figures 4.19­4.21.  The RAG story lecture elaborates on these genes and this process.  Please select the 
statement that is NOT true about RAG Genes and random recomination. 
Question 7 options:

Somatic recombination occurs during B cell development.  During this process, the 
V, D and J segments are cut and spliced and help produce the great variety of 
antigen binding sites.
Variable region sequences are flanked by RSSs, these signal sequences are 
recognized by the RAG genes.

Junctional diversity is created by exchanging V regions for J regions.
Junctional diversity is created by having random N­ nucleotides added after RAG 
genes clip RSSs generating P­nucleotides.
RAG genes are thought to have evolved from transposons. 
Save
Question 8 (4 points)
 
Please see Figure 5.20.  This is shown on slide 16 of the chapter 5 lecture notes.  Please select the statement(s) that 
correctly describe the difference between MHC class I and MHC class II antigen processing.
Question 8 options:

There is no difference in how antigen processing occurs for MHC class I and MHC 
class II molecules.
As MHC class I molecules present antigens exclusively from extracellular 
pathogens, the extracellular antigens are engulfed and form an endocytic vesicle.  
Peptides are then processed using phagocytosis, and are bound by MHC 
molecules. 
As MHC class II molecules present antigens exclusively from intracellular 
pathogens, the intracellular antigens are processed in a proteasome.  Peptides are
then transported from the proteasome through TAP to the ER lumen where they 
are loaded onto the MHC molecule.
Answers 2 and 3 WOULD be correct if the MHC class type were switched.  
Specifically, answer 3 would be correct if MHC class I molecules were identified, 
and answer 2 would be correct if MHC class II molecules were identified.
Save
Question 9 (4 points)
 
Please see the summary slide for our chapter 8 lecture.  This slide shows Figure 8.39 from our text.  Please select the 
correct statement(s) for this question on the stages of the T cell response.
Question 9 options:

Naive T cells must be activated in order to become effector T cells.  Specifically, 
Naive CD8 T cells recognize the antigen presented by MHC class II molecules and
will then develop into helper T cells.
Naive T cells must be activated in order to become effector T cells.  Specifically, 
Naive CD8 T cells recognize the antigen presented by MHC class I molecules and 

will then develop into cytotoxic T cells.
Cytotoxic T cells recognize cells that have been infected (viral) and kill them via 
Apoptosis.
Helper T cells exist in two forms; TH1 cells recognize macrophages that contain 
vesicles of bacteria and activate the macrophages to kill the bacteria, while TH2 
cells activate B cells that will develop in to plamsa cells for antibody production. 
Answers 1 and 3 are correct
Answers 2 and 3 are correct
Save

ACC206 Week-2 Assignment

ACC206 Week-2 Assignment

ACC 206 Week Two Assignment

Please complete the following exercises below in either Excel or a word document (but must be single document). You must show your work where appropriate (leaving the calculations within Excel cells is acceptable). Save the document, and submit it in the appropriate week using the Assignment Submission button.


1. Analysis of stockholders' equity
Star Corporation issued both common and preferred stock during 20X6. The stockholders' equity sections of the company's balance sheets at the end of 20X6 and 20X5 follow:


20X6 20X5
Preferred stock, $100 par value, 10% $580,000 $500,000
Common stock, $10 par value 2,350,000 1,750,000

Paid-in capital in excess of par value
Preferred 24,000 —
Common 4,620,000 3,600,000
Retained earnings 8,470,000 6,920,000
Total stockholders' equity $16,044,000 $12,770,000

a. Compute the number of preferred shares that were issued during 20X6.
b. Calculate the average issue price of the common stock sold in 20X6.
c. By what amount did the company's paid-in capital increase during 20X6?
d. Did Star's total legal capital increase or decrease during 20X6? By what amount?



2. Bond computations: Straight-line amortization
Southlake Corporation issued $900,000 of 8% bonds on March 1, 20X1. The bonds pay interest on March 1 and September 1 and mature in 10 years. Assume the independent cases that follow.
• Case A—The bonds are issued at 100.
• Case B—The bonds are issued at 96.
• Case C—The bonds are issued at 105.

Southlake uses the straight-line method of amortization.

Instructions:
Complete the following table:
Case A Case B Case C
a. Cash inflow on the issuance date _______ _______ _______
b. Total cash outflow through maturity _______ _______ _______
c. Total borrowing cost over the life of the bond issue _______ _______ _______
d. Interest expense for the year ended December 31, 20X1 _______ _______ _______
e. Amortization for the year ended December 31, 20X1 _______ _______ _______
f. Unamortized premium as of December 31, 20X1 _______ _______ _______
g. Unamortized discount as of December 31, 20X1 _______ _______ _______
h. Bond carrying value as of December 31, 20X1 _______ _______ _______




3. Definitions of manufacturing concepts
Interstate Manufacturing produces brass fasteners and incurred the following costs for the year just ended:
Materials and supplies used
Brass $75,000
Repair parts 16,000
Machine lubricants 9,000
Wages and salaries Machine operators 128,000
Production supervisors 64,000
Maintenance personnel 41,000
Other factory overhead Variable 35,000
Fixed 46,000
Sales commissions 20,000

Compute:
a. Total direct materials consumed
b. Total direct labor
c. Total prime cost
d. Total conversion cost





4. Schedule of cost of goods manufactured, income statement
The following information was taken from the ledger of Jefferson Industries, Inc.:
Direct labor $85,000 Administrative expenses $59,000
Selling expenses 34,000 Work in. process:
Sales 300,000 Jan. 1 29,000
Finished goods Dec. 31 21,000
Jan. 1 115,000 Direct material purchases 88,000
Dec. 31 131,000 Depreciation: factory 18,000
Raw (direct) materials on hand Indirect materials used 10,000
Jan. 1 31,000 Indirect labor 24,000
Dec. 31 40,000 Factory taxes 8,000
Factory utilities 11,000
Prepare the following:
a. A schedule of cost of goods manufactured for the year ended December 31.
b. An income statement for the year ended December 31.


5. Manufacturing statements and cost behavior
Tampa Foundry began operations during the current year, manufacturing various products for industrial use. One such product is light-gauge aluminum, which the company sells for $36 per roll. Cost information for the year just ended follows.
Per Unit Variable Cost Fixed Cost
Direct materials $4.50 $ —
Direct labor 6.5 —
Factory overhead 9 50,000
Selling — 70,000
Administrative — 135,000








Production and sales totaled 20,000 rolls and 17,000 rolls, respectively There is no work in process. Tampa carries its finished goods inventory at the average unit cost of production.
Instructions:
a. Determine the cost of the finished goods inventory of light-gauge aluminum.
b. Prepare an income statement for the current year ended December 31
c. On the basis of the information presented:
1. Does it appear that the company pays commissions to its sales staff? Explain.
2. What is the likely effect on the $4.50 unit cost of direct materials if next year's production increases? Why?