Streaming stored audio

Streaming stored audio

Streaming stored audio
Consider streaming stored audio. Does it make sense to run the application over UDP or TCP? Which transport protocol does RealNetworks use? Why? Which transport protocol do the Microsoft streaming products use? Why?
Minimum number of words 500, referencing with Harvard style and the number of references not less than three Academic Articles or books.
Make sure that there is no Plagiarism

BSOP 326 Total Quality Management Week 8 Final Exam 2014 Solution

BSOP 326 Total Quality Management Week 8 Final Exam 2014 Solution

Page 1

1. (TCO 1) Which of the following practices were utilized by most companies to maintain quality levels until the start of the 1980s? (Points : 6)

Team-based initiativesProcess-improvement effortsDesign-quality reviewsMass inspection

2. (TCO 1) Quality is most difficult to measure and analyze under which of the following definitions? (Points : 6)

JudgmentalUser-basedProduct-basedValue-based

3. (TCO 2) Which of the following systems do not have a role to play in assuring quality in a manufacturing firm? (Points : 6)

SalesPurchasingTool EngineeringNone (All answers have a role.)

4. (TCO 2) _____ is a challenge facing many service firms such as Avis, Inc.'s Worldwide Reservation Center that handles millions of calls and books more than six million reservations in a year. (Points : 6)

The high volume of transactions leading to numerous opportunities for errorService sector declineThe inability to define and measure qualityHigh labor turnover

5. (TCO 3) In which of the following categories can companies receive a Malcolm Baldrige National Quality Award? (Points : 6)

Small businessManufacturingServiceAll of the above

6. (TCO 3) ISO 9000:2000 defines a _____-based approach to quality management systems. (Points : 6)

customerstatisticsprocessproduct

7. (TCO 4) _____ is a method the Deming philosophy focuses on for improvements in product and service quality. (Points : 6)

100 percent inspectionReducing variationFinancial analysisSeparating the planning and execution functions of management

8. (TCO 4) The primary reason for Deming's position that slogans should be eliminated is which of the following? (Points : 6)

Most problems are a result of the system and cannot be eliminated without redesigning the system.Slogans take up valuable space in the production department.Slogans are costly to maintain and periodically update.Workers don't always understand the slogans.

9. (TCO 5) Measurable performance levels that define the quality of customer contact with an organization's representatives are known as which of the following? (Points : 6)

Customer contact requirementsQuality function deploymentsIndexed service standardsConsumer benefits packages

10. (TCO 5) Maintaining a clean, well-lit waiting room in a doctor's office is an example of which service-quality dimension? (Points : 6)

CompetenceCourtesyCommunicationTangibles

11. (TCO 6) The leadership skill of _____ is demonstrated by leaders who encourage employees to participate in quality-improvement efforts and develop cross-functional teamwork and customer-supplier partnerships. (Points : 6)

visioningintuitionempowermentself-understanding

12. (TCO 6) The _____ theory of leadership suggests that the manner in which leaders deal with subordinates depends on contingent rewards and punishments. (Points : 6)

attributionaltransactionalsubstitutes for leadershipemotional intelligence

13. (TCO 7) Employee suggestion systems have been used to identify ways to _____. (Points : 6)

improve qualityreduce costsimprove worker safetyAll of the above

14. (TCO 7) Under Herzberg's theory of motivation, worker safety would represent a(n) _____ factor and advancement would represent a(n) _____ factor. (Points : 6)

motivational, maintenancemaintenance, motivationalattribute, innovativeinnovative, attribute

15. (TCO 8) A group of employees in an office who are fully responsible for all aspects of processing claims at an insurance company is an example of which of the following team types? (Points : 6)

Problem-solving teamProject teamVirtual teamSelf-managed team

16. (TCO 8) During the _____ stage of a team's life cycle, team members agree on roles, ground rules, and acceptable behavior when doing the work of the team. (Points : 6)

FormingStormingNormingPerforming

17. (TCO 9) Which of the following is not part of a process control system? (Points : 6)

Comparison of actual results with the standardA means of measuring accomplishmentA standard or goalA backup process

18. (TCO 9) Process management consists of which of the following? (Points : 6)

Design, management, and improvementDesign, control, and improvementDesign, control, and standardizationAnalysis, control, and improvement

19. (TCO 10) During Final Inspection at a shirt manufacturer, more than 1,500 shirts were found with incorrect buttons. The manufacturer sold the shirts at 70 percent of the normal price to a retailer who specializes in factory seconds. The revenue lost by the manufacturer is considered which of the following? (Points : 6)

An internal failure costAn appraisal costAn external failure costA prevention cost

20. (TCO 10) The additional labor that is used when a machined part is returned to the drilling department for rework to correct a quality problem is considered which of the following? (Points : 6)

A prevention costAn appraisal costAn internal failure costAn external failure cost

21. (TCO 11) Which of the following is NOT a principle of statistical thinking as a philosophy of learning and action? (Points : 6)

All work occurs in a system of interconnected processes.Variation exists in all processes.All variation can be traced to human error.Understanding and reducing variation are keys to success.

22. (TCO 11) Which of the following tools is most useful for viewing the variability of a quality characteristic? (Points : 6)

Affinity diagramControl chartChecklistFishbone diagram

23. (TCO 12) Everything else remaining constant, when the sample size _____, sampling error decreases. (Points : 6)

increasesdecreasesstays constantNone of the above

24. (TCO 12) Determine the upper control limit (UCL) and lower control limit (LCL) for an X-Bar chart if six samples of subgroup size 3 (n=3) were collected, the mean of the sample averages is 4.7, and the mean of the sample ranges is 0.35. Determine the upper control limit (UCL) and lower control limit (LCL) for an X-Bar chart.CHART (Points : 30)

UCL = 4.86905, LCL = 4.53095UCL = 4.90195, LCL = 4.49805UCL = 4.72250, LCL = 4.14350UCL = 5.05805, LCL = 4.34195

25. (TCO 12) Determine the upper control limit (UCL) and lower control limit (LCL) for an R-chart if twenty samples of subgroup size 5 (n=5) were collected for a variable measurement and the mean of the sample ranges equals 4.4. (Points : 30)

UCL = 9.3016, LCL = 0.0000UCL = 1.4696, LCL = 0.0000UCL = 11.3256, LCL = 0.0000UCL = 8.8176, LCL = 0.0000

26. (TCO 13) Which of the following are the phases of the Six Sigma problem solving approach? (Points : 6)

Define, Monitor, Analyze, Improve, Confirm Define, Monitor, Analyze, Invest, Control Define, Measure, Analyze, Improve, Control Define, Measure, Analyze, Invest, Control

27. (TCO 14) Current research suggests leadership will have to change from: (Points : 6)

Process to positionFocus throughout the organization to a focus at the topPower resulting from position to power resulting from knowledge Feeling and emotional to logical and rational


Page 2

1. (TCO 3) Answer the following questions concerning ISO 9000:

Discuss the basic premise behind ISO 9000. (10 points)

Discuss three of the five objectives of ISO 9000. (10 points)

Discuss the three documents that make up ISO 9000. (10 points)

(Points : 30)


2. (TCO 14) Answer the following questions concerning cultural change and the workforce:

Discuss three of the five behaviors that Juran and others suggest are needed to develop quality cultural change. (10 points)

Discuss ownership at the workforce level and why it is important to the implementation of TQM. (10 points)

Discuss how increased ownership requires increased sharing of information. (10 points)

(Points : 30)


3. (TCO 4) Deming's Profound Knowledge consists of four elements. Answer the following three parts relating to the "variation" element of Deming's Profound Knowledge. Your discussion should relate to this element of Deming's Profound Knowledge and not variation in general.

Explain how a quincunx can be used to explain variation. (10 points)

Why is understanding variation important, and what do we need to do about it? (10 points)

What tools do we need to use to understand variation, and why is using these tools important to our decision-making process? (10 points)

(Points : 30)

Convergence, Divergence and Crossvergence

Convergence, Divergence and Crossvergence

Convergence, Divergence and Crossvergence
When the goal of a headquarters is to integrate closely with a subsidiary, it becomes essential to understand culturally-defined behaviours and values, in addition to local laws and practices.

1.How useful are theories of convergence, divergence and crossvergence in explaining the complexities of relationships between headquarters and subsidiaries, and how is this theoretical framework similar to or different from other cross-cultural management frameworks which you have studied in this module?

2. Which theoretical framework(s) would you apply when considering how to bring about more effective integration with subsidiaries and minimise risk for headquarters?

3. Share a detailed process for integration starting with discovery of various cultures involved. Include one or two real world examples.

Use Harvard Referencing Style. Include citing in the text from the article and other references.

No plagirism and between 500- 1200 words

If you require further information please let me know.

Other References: [Text Book

Mead, R. & Andrews, T. G. (2009)International management. 4th ed. Chichester, England: John Wiley & Sons.

CHPT 18,20 & 23

continuous improvement of a company

continuous improvement of a company

Given the following scenario:
Assume that you have recently been hired as the director of continuous improvement of a company. You are an outside hire with limited history of the firm and personal capital at the firm, and you are responsible for lean production, total quality management (TQM), six sigma, and best practice implementation. 
Lean production means doing more with less, such as less inventory, fewer workers, or less space. A recent trade in quality management is lean six sigma (also known as lean sigma) that integrates six sigma and lean production.
The capacity for which you were hired has existed for three years with a direct line of report to the vice-president of operations and dotted line of report to the head of information technology (IT), the chief information officer (CIO), and the director of internal controls and audit. You are the second person to fill in this position. You have a team of internal consultants; half of your team has six sigma black belt or equivalent capabilities with the remainder having a solid understanding of operations and IT. You also have a budget for two external vendor resources. 
You have taken six months to familiarize yourself with the organization and its people, mission, goals, strategy, and structure. In this time, you have also evaluated current operations. At the end of this period, you are assigned to deliver a report identifying the three most promising avenues for achieving best practices within the company. You have already been told that the company suffers from both aging and complex information systems and that your recommendation must include a major upgrade of those systems. The executive officers anticipate major investments in IT over the next several years. Your best practice implementations, coupled with new technology, must be measurable in terms of speed, quality, productivity, and efficiency or other key performance indicators that you identify in your report. 
For this assignment, you will choose a company with which you are familiar. You are encouraged to choose a company for which you currently work or have worked, but you may choose some other firm if you believe it will be a compelling analysis. 
You may choose one area of the company, such as a manufacturing plant or product design, to focus on if you can make a strong case. Your recommendations should have the following features. 
• Repeatable: If you “fix” three things in a manufacturing plant, you should be able to tackle the “next” three in iteration. 
• Scalable: If they work in one plant, they should work in all of them. 
• Replicable: Your process for improvement should be repeatable in different, disparate parts of the organization. 
This is a key initiative at the “C” level, and your recommendation will reach the board of directors.
Your paper must include the following sections:
1. Strategic Overview: (1 page)
Provide a brief description of the following elements: 
a. The company, including its products or services 
b. Marketing strategy: target market segments, value proposition, market position, and source of competitive differentiation 
c. Organizational structure 
d. Any other relevant facts 
2. Analysis of the Supply Chain: (2-3 pages)
Analyze the supply chain for your identified company by explaining the following key elements of the supply chain: 
a. Identify key inputs, including less tangible assets, such as human resources and information. How are these key inputs sourced, reconfigured into a product or service, and delivered to your customers? 
b. Identify the key processes that add value, and evaluate the supply chain performance relative to the competition. What are the key inputs for each process? How are these inputs processed or configured into the final offering for your customers? 
c. What is the value added at each step? 
d. What is the role of information technology and e-commerce in serving your customers? 
e. What are the key performance measures for evaluating your supply chain? 
f. Research online sources to explain how the performance on these measures compares to that of your competitors? 
3. Plan to Improve Operating Processes: (2 pages) 
Create a plan for improving the performance of three specific operating processes in your company. Your plan should address the following: 
a. Identify three elements of the supply chain that you recommend as targets for improvement. 
b. State the performance improvement opportunity for each element, and indicate how it will improve process speed, quality, efficiency, and productivity. 
c. Explain what specific action or change you recommend for each supply chain element selected. 
4. Explanation of the Results of Performance Improvements Regarding Product or Service: (1 pages) 
Explain the following: 
a. How will your product or service be improved as a result of these changes to the supply chain activities? 
b. How are you altering the specific features or attributes of your product or service? 
c. Why are these specific changes important to your customers? 
d. How do these changes enhance the value proposition and competitive position of your company? 
e. What lasting capabilities and improvement are you introducing into your company through these changes? 
f. How will you measure the scope and impact of your improvements? What are your key performance indicators? 
5. Assessment of the Impact on Human Resources: (1–2 pages) 
Detail how your plan impacts your company’s HR and human capital strategy by explaining how the organization’s structure supports the new process configuration you are recommending. Your response should address the following questions: 
a. Are the roles and responsibilities in your organization properly defined and aligned to enable these changes? Who will perform these new/modified process activities, and what changes to their jobs do you anticipate? 
b. Is decision-making authority assigned so that the process changes you propose can be implemented and properly managed under the current structure? Who will own the process and the results? Based on the current structure, will they have the authority to make changes as necessary? 
c. Are the individuals with the right skills in place to implement these changes? If not, how will you attract the talent necessary to implement your changes? How will you retrain the existing employee base? How will you handle attrition? How will you reduce the risk of impacted protected classes?
6. Changes:
Explain changes to the compensation and incentives at your company that are necessary to reinforce your recommendations and increase efforts for continuous improvement throughout the organization. Explain how your plan motivates employees, customers, and suppliers better.
Write an 8-10-page paper in Word format. You may rearrange the above sections if it improves the quality of your paper. Apply APA standards to citation of sources. 

ALL WORK MUST BE ORGINIAL, NOT COPIED DIRECTLY FROM AN ONLINE SOURCE AS IT WON'T BE ACCETED.


Additional Requirements 

Level of Detail: Show all work 
Other Requirements: Please make sure there is plagiarized work as it will be checked via turnitin software. 

ACG6175 – Final Examination

ACG6175 – Final Examination

ACG6175 – Final Examination

Name ___________________________________________________

Panther ID ______________________________________________








Score:

Question:

1 	 / 4

2 	 / 4

3 	 / 4

4 	 / 4

5 	 / 4

Total 		 / 20 
NEW YORK--(BUSINESS WIRE)—01/09/2008
Alcoa (NYSE: AA) today announced it achieved record results in revenues, income from continuing operations and cash from operations for the full year 2007. Revenues for 2007 were $30.7 billion, compared to $30.4 billion in 2006. Annual income from continuing operations rose to $2.6 billion, or $2.95 per diluted share, for 2007, a 19 percent increase compared to $2.2 billion, or $2.47, in 2006. And, cash from operations for 2007 increased 21 percent to more than $3.1 billion from $2.6 billion in 2006.

“For the second year in a row, Alcoa has achieved company all-time records in revenues, income from continuing operations and cash generation,” said Alain Belda, Alcoa Chairman and CEO. “We battled substantially higher material input and energy costs, and currency impacts while simultaneously continuing to execute on the largest capital investment program in our history.

“We have invested in new plants, expanded production at others, modernized operations, renegotiated long-term power agreements, and built new energy facilities to extend our energy access at competitive rates, while also continuing to invest in growth markets such as Brazil, China and Russia,” Belda said.

"These actions, combined with portfolio and cash flow management, our share repurchase program, conservative leverage, and our commitment to sustainability delivered results now, and will continue to generate quality profitable growth for decades,” added Belda. “In 2007, Alcoans delivered yet again. This is what builds a stronger Company for our stakeholders.”

Fourth quarter income from continuing operations was $624 million, or $0.74. Included in the results are a favorable restructuring adjustment and a tax benefit totaling $323 million or $0.38 per share, almost all of which stems from the recent agreement to sell the packaging and consumer businesses. Income from continuing operations in the 2006 fourth quarter was $258 million, or $0.29, and $558 million, or $0.64, in the third quarter 2007.

Net income for the fourth quarter 2007 was $632 million, or $0.75, which includes the restructuring adjustment and the benefit from the agreement to sell the packaging and consumer business. Net income for the fourth quarter 2006 was $359 million, or $0.41, and $555 million, or $0.63, in the 2007 third quarter.

Revenues for the 2007 fourth quarter were $7.4 billion, compared to $7.8 billion a year ago as a result of lower LME prices and the exclusion of results from the soft alloy extrusion business which is now part of a joint venture. The soft alloy extrusion business had revenues of approximately $560 million in the fourth quarter of 2006.
________________________________________
LME = LONDON METAL EXCHANGE. Prices for aluminum, copper and nickel, unlike steel, are set by contracts traded on commodity exchanges such as the London Metal Exchange and the New York Mercantile Exchange. ________________________________________
Cash Generation, ROC, and Growth

Cash from operations in the fourth quarter 2007 was $643 million, bringing full-year cash from operations to more than $3.1 billion, compared to $2.6 billion in 2006 and helping to keep the Company’s debt-to-capital ratio within its targeted range at 30.2 percent.

The Company’s trailing 12-month return on capital (ROC) was 16.1 percent, excluding investments in growth projects. Including investments in growth projects, ROC stands at 12.7 percent, well above the cost of capital.

In 2007, the Company completed major growth projects, including its first greenfield smelter in 20 years in Iceland, a new anode plant in Mosjoen, Norway, and its third flat-rolled products facility in China (Kunshan). In addition, major progress was made on several other growth projects including the Juruti bauxite mine, the expansion of the Bohai rolling mill in China, and expansion of the Sao Luis alumina refinery.

The Company made significant progress to extend the life of existing facilities through renegotiating long-term power agreements including those in Massena, NY and Wenatchee, WA in 2007. The Company also continued investments in Brazil including the Serra do Facao hydroelectric project to further increase its self-sufficiency there.

The Company is now operating primary aluminum production at a run rate of approximately four million metric tons per year.

The Company made major progress in 2007 on its portfolio management plan. During the year, the Company reached agreement to sell its packaging and consumer businesses; divested the automotive castings business; monetized its stake in Chalco to enable redeployment of capital into other value-adding options, including projects in China; and formed a joint venture with Sapa for its soft alloy extrusion business.

In 2007, Alcoa also increased its share repurchase program from 10 percent to 25 percent of outstanding shares and increased its dividend by 13 percent during the year. Through the end of the fourth quarter the Company has repurchased 68 million shares, or approximately eight percent of shares outstanding, as part of its share repurchase program, leaving approximately 150 million shares, or 18 percent of shares outstanding, remaining within the authorization.

Segment and Other Results
 ________________________________________

NOTE: All comparisons are on a sequential quarter basis, unless noted. ATOI = “AFTER TAX OPERATING INCOME.” ATOI is similar to Net Operating Profit After Tax, or NOPAT. 
 ________________________________________

Alumina –After-tax operating income (ATOI) was $205 million, a decrease of $10 million, or five percent, from the prior quarter. System production increased by a net of 80 kmt as Suralco, San Ciprian and Pinjarra set quarterly production records and Jamalco continued its recovery from Hurricane Dean. However, higher freight and energy costs and unfavorable currency offset production gains.

Primary Metals -- ATOI was $196 million, down $87 million, or 31 percent, compared to the prior quarter. The majority of the decrease resulted from lower LME prices and unfavorable currency. These items were partially offset by the recovery at the Rockdale and Tennessee smelters and a three percent production increase. The company purchased approximately 55 kmt of primary metal for internal use.

Flat-Rolled Products –ATOI was a loss of $16 million for the quarter, down $77 million from the prior quarter. Weak performance in Russia and China accounted for 50 percent of the ATOI decline in the quarter. For Russia specifically, the increased loss was due to higher operational and energy costs and unfavorable currency. The remaining decline in the segment’s ATOI is mostly due to general market weakness in the U.S. and Europe flat-rolled businesses, weaker product mix, and de-stocking by aerospace customers. Finally, results for the Australian flat-rolled business declined following restructuring last quarter that is designed to reduce headcount and simplify product mix. In addition, the weakening U.S. dollar has had a negative impact in this business.

Extruded and End Products –ATOI was $16 million, up $3 million, or 23 percent, from the prior quarter. Market and operating conditions were comparable to the prior quarter with margin improvements accounting for the increase.

Engineered Solutions –ATOI was $58 million or essentially flat to the prior quarter ATOI of $60 million. Improvements from the wire harness business restructuring offset the weaker market conditions in forgings and investment castings. On a year over year basis, the Fastening Systems and Power & Propulsion (Howmet) businesses had outstanding years with ATOI up 36 percent and 47 percent, respectively.

Packaging & Consumer -- ATOI was $56 million, up $20 million, or 56 percent, from the prior quarter. The normal seasonal decrease in the closures business was offset by seasonal improvements in the consumer products business. With the pending sale, depreciation was ceased in the segment leading to a positive impact of approximately $20 million.

________________________________________
Recent Earnings Forecasts:

Qtr.4 2007	Qtr.3 2007	Qtr.2 2007	Qtr.1 2007 
Estimate 	0.33 		0.65 		0.81 		0.76 
Actual 	0.36 		0.64		0.81		0.79
________________________________________
 
Alcoa and subsidiaries
Statement of Consolidated Income (unaudited), continued
(in millions, except per-share, share, and metric ton amounts)
	Year ended
	December 31,
	2006	  	2007
Sales 	$ 	30,379 			$ 	30,748 	
			  
Cost of goods sold (exclusive of expenses below) 		23,318 				24,248 	
Selling, general administrative, and other expenses 		1,402 				1,472 	
Research and development expenses 		213 				249 	
Provision for depreciation, depletion, and amortization 		1,280 				1,268 	
Goodwill impairment charge 		–				133 	
Restructuring and other charges 		543 				399 	
Interest expense 		384 				401 	
Other income, net 	  	(193)			  	(1,913)	
Total costs and expenses 		26,947 				26,257 	
			  
Income from continuing operations before taxes on income 		3,432 				4,491 	
Provision for taxes on income 	  	835	  		  	1,555	  
Income from continuing operations before minority interests’ share 		2,597 				2,936 	
Less: Minority interests’ share 	  	436	  		  	365	  
			  
Income from continuing operations 		2,161 				2,571 	
Income (loss) from discontinued operations 	  	87	  		  	(7)	
			  
NET INCOME 	$	2,248	  		$	2,564	  
			  
Earnings (loss) per common share: 			
Basic: 			
Income from continuing operations 	$ 	2.49 			$ 	2.98 	
Income (loss) from discontinued operations 	  	.10	  		  	–	  
Net income 	$	2.59	  		$	2.98	  
			
	2006		  2007
Average number of shares used to compute: 			
Basic earnings per common share 		868,819,955 				860,771,021 	
Common stock outstanding at the end of the period 		867,739,544 				827,401,800 	
			  
Shipments of aluminum products (metric tons) 		5,545,000 				5,393,000 	
Alcoa and subsidiaries Consolidated Balance Sheet (a = unaudited) - in millions
  		December 31, 2006 (a)		December 31, 2007
ASSETS 				
Current assets: 				
Cash and cash equivalents 		$ 	506 			$ 	483 	
Receivables from customers, less allowances of $68 in 2006 and $72 in 2007 			2,788 				2,602 	
Other receivables 			301 				451 	
Inventories 			3,380 				3,326 	
Prepaid expenses and other current assets 		  	1,378	  		  	1,224	  
Total current assets 		  	8,353	  		  	8,086	  
				  
Properties, plants, and equipment 			27,689 				31,601 	
Less: accumulated depreciation, depletion, and amortization 		  	13,682	  		  	14,722	  
Properties, plants, and equipment, net 		  	14,007	  		  	16,879	  
Goodwill 			4,885 				4,806 	
Investments 			1,718 				2,038 	
Other assets 			3,939 				4,046 	
Assets held for sale 		  	4,281	  		  	2,948	  
Total assets 		$	37,183	  		$	38,803	  
				  
LIABILITIES 				
Current liabilities: 				
Short-term borrowings 		$ 	462 			$ 	569 	
Commercial paper 			340 				856 	
Accounts payable, trade 			2,407 				2,787 	
Accrued compensation and retirement costs 			949 				943 	
Taxes, including taxes on income 			851 				644 	
Other current liabilities 			1,360 				1,165 	
Long-term debt due within one year 		  	510	  		  	202	  
Total current liabilities 		  	6,879	  		  	7,166	  
Commercial paper 			1,132 				–	
Long-term debt, less amount due within one year 			4,777 				6,371 	
Accrued pension benefits 			1,540 				1,098 	
Accrued postretirement benefits 			2,956 				2,753 	
Other noncurrent liabilities and deferred credits 			2,002 				1,943 	
Deferred income taxes 			762 				545 	
Liabilities of operations held for sale 		  	704	  		  	451	  
Total liabilities 		  	20,752	  		  	20,327	  
				  
MINORITY INTERESTS 		  	1,800	  		  	2,460	  
				  
SHAREHOLDERS' EQUITY 				
Preferred stock 			55 				55 	
Common stock 			925 				925 	
Additional capital 			5,817 				5,774 	
Retained earnings 			11,066 				13,039 	
Treasury stock, at cost 			(1,999) 				(3,440)	
Accumulated other comprehensive loss 		  	(1,233)			  	(337)	
Total shareholders' equity 		  	14,631	  		  	16,016	  
Total liabilities and equity 		$	37,183	  		$	38,803	  
(a) The Consolidated Balance Sheet as of December 31, 2006 has been reclassified to reflect the movement of the automotive castings and packaging and consumer businesses to held for sale in the third quarter of 2007. 

Alcoa and subsidiaries - Segment Information (unaudited) - dollars in millions, except realized prices; production and shipments in thousands of metric tons [kmt])
		  		  		  		  		  		  	
	4Q06		2006		1Q07		2Q07		3Q07		4Q07		2007
Alumina:													
Production (kmt) 		3,790 				15,128 				3,655 			3,799 			3,775 				3,855 				15,084 
Third-party alumina shipments (kmt) 		2,084 				8,420 				1,877 			1,990 			1,937 				2,030 				7,834 
Third-party sales 	$ 	711 			$ 	2,785 			$ 	645 		$ 	712 		$ 	664 			$ 	688 			$ 	2,709 
Intersegment sales 	$ 	550 			$ 	2,144 			$ 	579 		$ 	587 		$ 	631 			$ 	651 			$ 	2,448 
Equity income (loss) 	$ 	1 			$ 	(2 )			$ 	1 		$ 	–		$ 	(1 )			$ 	1 			$ 	1 
Depreciation, depletion, and amortization 	$ 	56 			$ 	192 			$ 	56 		$ 	62 		$ 	76 			$ 	73 			$ 	267 
Income taxes 	$ 	115 			$ 	428 			$ 	100 		$ 	102 		$ 	89 			$ 	49 			$ 	340 
After-tax operating income (ATOI) 	$ 	259 	  	  	$ 	1,050 	  	  	$ 	260 	  	$ 	276 	  	$ 	215 	  	  	$ 	205 	  	  	$ 	956 
													  
Primary Metals:													
Aluminum (kmt) 		908 				3,552 				899 			901 			934 				959 				3,693 
Third-party aluminum shipments (kmt) 		556 				2,087 				518 			565 			584 				624 				2,291 
Average realized price per kmt of aluminum 	$ 	2,766 			$ 	2,665 			$ 	2,902 		$ 	2,879 		$ 	2,734 			$ 	2,646 			$ 	2,784 
		4Q06				2006				1Q07			2Q07			3Q07				4Q07				2007
Third-party sales 	$ 	1,698 			$ 	6,171 			$ 	1,633 		$ 	1,746 		$ 	1,600 			$ 	1,597 			$ 	6,576 
Intersegment sales 	$ 	1,524 			$ 	6,208 			$ 	1,477 		$ 	1,283 		$ 	1,171 			$ 	1,063 			$ 	4,994 
Equity income 	$ 	18 			$ 	82 			$ 	22 		$ 	18 		$ 	11 			$ 	6 			$ 	57 
Depreciation, depletion, and amortization 	$ 	97 			$ 	395 			$ 	95 		$ 	102 		$ 	102 			$ 	111 			$ 	410 
Income taxes 	$ 	180 			$ 	726 			$ 	214 		$ 	196 		$ 	80 			$ 	52 			$ 	542 
ATOI 	$ 	480 	  	  	$ 	1,760 	  	  	$ 	504 	  	$ 	462 	  	$ 	283 	  	  	$ 	196 	  	  	$ 	1,445 
													  
													
Flat-Rolled Products:													
Third-party aluminum shipments (kmt) 		564 				2,273 				568 			583 			602 				574 				2,327 
Third-party sales 	$ 	2,127 			$ 	8,297 			$ 	2,275 		$ 	2,344 		$ 	2,309 			$ 	2,243 			$ 	9,171 
Intersegment sales 	$ 	66 			$ 	246 			$ 	60 		$ 	63 		$ 	59 			$ 	59 			$ 	241 
Equity loss 	$ 	(1) 			$ 	(2 )			$ 	–		$ 	–		$ 	–			$ 	–			$ 	–
Depreciation, depletion, and amortization 	$ 	55 			$ 	219 			$ 	55 		$ 	55 		$ 	58 			$ 	55 			$ 	223 
Income taxes 	$ 	(2)			$ 	68 			$ 	26 		$ 	33 		$ 	31 			$ 	5 			$ 	95 
ATOI 	$ 	62 	  	  	$ 	255 	  	  	$ 	62 	  	$ 	93 	  	$ 	61 	  	  	$ 	(16 )		  	$ 	200 
													  
													
Extruded and End Products:													
Third-party aluminum shipments (kmt) 		203 				877 				213 			146 			78 				69 				506 
Third-party sales 	$ 	1,070 			$ 	4,419 			$ 	1,175 		$ 	965 		$ 	563 			$ 	543 			$ 	3,246 
Intersegment sales 	$ 	25 			$ 	99 			$ 	42 		$ 	26 		$ 	13 			$ 	7 			$ 	88 
Equity income (loss) 	$ 	–			$ 	–			$ 	–		$ 	9 		$ 	(2 	) 		$ 	7 			$ 	14 
Depreciation, depletion, and amortization 	$ 	31 			$ 	118 			$ 	9 		$ 	10 		$ 	11 			$ 	9 			$ 	39 
Income taxes 	$ 	2 			$ 	18 			$ 	11 		$ 	29 		$ 	5 			$ 	9 			$ 	54 
ATOI 	$ 	27 	  	  	$ 	60 	  	  	$ 	34 	  	$ 	46 	  	$ 	13 	  	  	$ 	16 	  	  	$ 	109 
													  
													
													
	4Q06		2006		1Q07		2Q07		3Q07		4Q07		2007
Engineered Solutions:													
Third-party aluminum shipments (kmt) 		30 				139 				31 			30 			27 				24 				112 
Third-party sales 	$ 	1,346 			$ 	5,456 			$ 	1,449 		$ 	1,478 		$ 	1,407 			$ 	1,391 			$ 	5,725 
Equity loss 	$ 	(5 )			$ 	(4 )			$ 	–		$ 	–		$ 	–			$ 	–			$ 	–
Dep, depl, & amort	$ 	44 			$ 	169 			$ 	41 		$ 	42 		$ 	46 			$ 	43 			$ 	172 
Income taxes 	$ 	(15) 			$ 	101 			$ 	44 		$ 	47 		$ 	38 			$ 	11 			$ 	140 
ATOI 	$ 	73 	  	  	$ 	331 	  	  	$ 	93 	  	$ 	105 	  	$ 	60 	  	  	$ 	58 	  	  	$ 	316 
													  
Packaging and Consumer:													
Third-party aluminum shipments (kmt) 		46 				169 				35 			40 			37 				45 				157 
Third-party sales 	$ 	837 			$ 	3,235 			$ 	736 		$ 	837 		$ 	828 			$ 	887 			$ 	3,288 
Equity income 	$ 	1 			$ 	1 			$ 	–		$ 	–		$ 	–			$ 	–			$ 	–
Dep, depl, & amort	$ 	32 			$ 	124 			$ 	30 		$ 	30 		$ 	29 			$ 	–			$ 	89 
Income taxes 	$ 	11 			$ 	33 			$ 	7 		$ 	17 		$ 	17 			$ 	27 			$ 	68 
ATOI 	$ 	26 	  	  	$ 	95 	  	  	$ 	19 	  	$ 	37 	  	$ 	36 	  	  	$ 	56 	  	  	$ 	148 
		  		  		  		  		  		  	
Reconciliation of ATOI to consolidated net income:	4Q06		2006		1Q07		2Q07		3Q07		4Q07		2007
Total segment ATOI 	$ 	927 			$ 	3,551 			$ 	972 			$ 	1,019 			$ 	668 			$ 	515 			$ 	3,174 	
Unallocated amounts (net of tax): 													
Impact of LIFO 		(66 )				(170 	) 			(27)				(16) 				10 				9 				(24) 	
Interest income 		14 				58 				11 				9 				10 				10 				40 	
Interest expense 		(61 )				(250 	) 			(54) 				(56) 				(98) 				(53) 				(261) 	
Minority interests 		(98 )				(436 	) 			(115 	) 			(110) 				(76) 				(64) 				(365) 	 
Corporate expense 		(82 )				(317 	) 			(86) 				(101) 				(101 	) 			(100 	) 			(388) 	
Restructuring and other charges 		(386 	) 			(379 	) 			(18) 				21 				(311 	) 			1 				(307) 	 
Discontinued operations 		101 				87 				(11) 				(1) 	 			(3) 				8 				(7) 	 
Other 	  	10 	  	  	  	104 	  	  	  	(10) 		  	  	(50) 		  	  	456 	  	  	  	306 	  	  	  	702 	  
Consolidated net income 	$ 	359 	  	  	$ 	2,248 	  	  	$ 	662 	  	  	$ 	715 	  	  	$ 	555 	  	  	$ 	632 	  	  	$ 	2,564 	  
The difference between certain segment financial information totals and consolidated financial information is in Corporate. 
 
QUESTIONS:

1.) Decompose Alcoa’s ROE for 2006 and 2007. In what direction do you see the company’s performance moving? What other information would you like to see (be specific)?
 
2.) Alcoa's net income for the 3rd quarter of 2007 increased 86% over 3rd quarter results from 2006. Why then did the stock price drop 6% after the company announced those earnings?  
 
3.) Based on the data presented, what operating segments comprise 
Alcoa's business?  Based on the reconciliation of ATOI to Net Income, what can you say about the quality of Alcoa’s income? Be specific in your answer.
 
4.) How would you classify (from an economic perspective) the products sold by Alcoa? What external factors limit Alcoa’s flexibility in pricing those products?  Which segments of Alcoa's operations do you think are most directly impacted by this pricing limitation?
 
5.) Given the pricing limitations on their products, on what basis does Alcoa 
compete?  Why might that make it difficult to compete with rising entities in 
diverse global locations, such as United Company Rusal, that that has access to low-cost hydropower in Russia?



REQUIRED: 
Compose your answers in Standard English.
Answer all parts of each question separately. 
Label each of your responses accordingly.
Provide and label the elements of any supporting calculations.
BE SPECIFIC!

Having problems w this problem set. Can someone help?

Having problems w this problem set. Can someone help?

Having problems w this problem set. Can someone help?

1 INET Lab Genetics Worksheet Report Template Student: Email: Date: For each correctly conducted genetics problem, you receive 5 points for a maximum 20 points. All Punnett squares must be shown. 1. There are 3 alleles controlling the ABO blood types. IA and IB are codominant genes so that the combination IAIB produces the AB blood type. The third allele, (i) is recessive to the other two alleles. Show your work for each cross. Indicate which of these parents could produce the given child. The first one is provided with answers as an example. (HINT: Do not forget that a heterozygous versus a homozygous blood type may yield different results. ) a) Parent A x AB Child IB B IA IA IA IA IA IB IA IA IA IA IB IA IB IA IA IA IA IB i IA i IB i Produce Child of Type? No Produce Child of Type? © Access Learning Systems 2 b) Parent Child A x O A Produce Child of Type? Produce Child of Type? © Access Learning Systems 3 c) Parent Child A x B O Produce Child of Type? Produce Child of Type? Produce Child of Type? Produce Child of Type? d) Parent Child A x AB O © Access Learning Systems 4 Produce Child of Type? Produce Child of Type? © Access Learning Systems 5 e) Parent Child B x B O Produce Child of Type? Produce Child of Type? Produce Child of Type? f) Parent Child AB x AB A Produce Child of Type? © Access Learning Systems 6 2. The allele for albinism (a) is recessive to the allele for normal pigmentation (A). A normally pigmented woman whose father is an albino marries an albino man whose parents are normal. They have three children, two normal and one albino. Give the genotypes for each person listed. Prove your answer. 8 Maternal Grandmother Father 6 9 Maternal Grandfather Mother Child 1 8 7 Paternal Grandmother 5 6 Paternal Grandfather 7 5 4 1 4 3 Relationship 3 2 # 2 1 Child 2 9 Genotype(s) Child 3 a) Show the cross of the paternal grandparents. (HINT: What must their genotypes be to produce and albino child? ) b) What are the possible genotypes of the maternal grandmother? © Access Learning Systems 7 © Access Learning Systems 8 Show the cross of the mother and father. 3. In horses, black coat color is influenced by the dominant allele (B), and chestnut coat color by the recessive allele (b). a) What color horse would you use to find out the genotype of a black trotter? b) Give the genotype and phenotype. Show your work and discuss the reason you would know the genotype of the black horse. Possible Allele Pairings with Homozygous Dominant Trotter F1 offspring probabilities: Possible Allele Pairings with Heterozygous Trotter F1 offspring probabilities: Reasoning: © Access Learning Systems 9 4. In Drosophila, the fruit fly, white eyes are determined by a recessive X­linked gene, and the wild­type or normal brick­ red eyes are due to its dominant allele. Use symbols of the following types: X rY = a white­eyed male; XRXR = a homozygous normal red female. a) What offspring can be expected from a cross of a white­eyed male and a homozygous normal female? b) Show the genotypes and list the phenotypes of the F1 offspring. F1 Cross F1 offspring probabilities: Male Female Red­Eyed White­Eyed c) Now, cross the F1 offspring. Show the genotypes and list the phenotypes of the F 2 offspring. F2 Cross F2 offspring probabilities: Male Red­Eyed White­Eyed Female

Finance – Financial Statement Analysis

Finance – Financial Statement Analysis

Finance - Financial Statement Analysis
Financial Statement Analysis Our purpose this week: learning how to measure the performance of companies by analyzing their financial statements. Show us that you have read and understood the required readings, links and attached files - quote them where appropriate.

Assignment:

You are the assistant to the CEO of a major company. Your CEO keeps an eye on the competition, and asks you to do the following. Using ratio analysis, compare two major competitors in the same industry.

Instructions:

Pick any two U.S. public companies in the same industry.

Select the 10 most important financial ratios for your two companies and calculate each for the last 2 fiscal years using Excel.

Follow the same format as in the examples posted in the file attached in the Week 3 Conference for the Drugstore Chains example. Use the "Compare" worksheet. The "W", "C", "Profiles" and "Z Score" worksheets are not required, and nor is the Dupont Analysis.

1. Create a single Excel file for your entire assignment.
2. You may obtain financial information and the companies'latest annual reports on the web directly from MSN Money or Yahoo Finance.For additional information, look for the SEC Form10-K link from one of the MSN Money or Yahoo Finance financial sites.
3. You should calculate, and comment upon, all 10 financial ratios for the last 2 fiscal years.
4. All calculations should be shown, and all answers should be thoroughly explained.
5. Whenever you use balance sheet items to calculate ratios, for each year be sure to average the beginning-of-year and end-of-year amounts to get the average for that year.
6. What can you tell from your analysis? What are the strengths and weaknesses of each company? Which is the stronger competitor? Give your reasons.

DrugstoreChains.xls. contains a comprehensive analysis of the financial statements of two large drugstore chains. It also shows how to predict bankruptcy with reasonable accuracy by using financial ratios. In addition, there is optional material in the attached DrugstoreChains.xls file that:

a) Illustrates and explains how different companies succeed by focusing on different key ratios like Net Income/Sales, or Sales/Total Assets (asset turnover) or Total Assets/Common Equity (leverage).

c) Shows the source for every number on every Excel worksheet: just click on any number in any Excel worksheet and you will see where it comes from. Showing the source for every number on every Excel worksheet is very important and helpful to readers, and you should do this on all of your Excel spreadsheets. These assignments are designed to help you to develop your analytical ability and your ability to explain your analysis in words. There are many uses for financial statement ratio analysis, especially in business strategy - for an example, see the "Strategic Control Map" developed by McKinsey & Company, the well-known international strategy consulting firm.

OPS MGMT – American International Automotive Industries (AIAI)

OPS MGMT – American International Automotive Industries (AIAI)

American International Automotive Industries (AIAI) manufactures auto and truck engine,
transmission, and chassis parts for manufacturers and repair companies in the United States,
South America, Canada, Mexico, Asia, and Europe. The company transports to its foreign
markets by container ships. To serve its customers in South America and Asia, AIAI has large
warehouse/distribution centers. In Europe it ships into Hamburg and Gdansk, where it has
contracted with independent distribution companies to deliver its products to customers
throughout Europe. However, AIAI has been displeased with a recent history of late deliveries
and rough handling of its products. For a time AIAI was not overly concerned since its European
market wasn't too big and its European customers didn't complain. In addition, it had more
pressing supply chain problems elsewhere. In the past five years, since trade barriers have
fallen in Europe and Eastern European markets have opened up, its Europeans business has
expanded, as has new competition, and its customers have become more demanding and
quality conscious. As a result, AIAI has initiated the process to select a site for a new European
warehouse/distribution center. Although it provides parts to a number of smaller truck and auto
maintenance and service centers in Europe, it has seven major customersauto and truck
manufacturersin Vienna, Leipzig, Budapest, Prague, Krakow, Munich, and Frankfurt. Its
customers in Vienna and Budapest have adopted manufacturing processes requiring
continuous replenishment of parts and materials.
AIAI's European headquarters is in Hamburg. The vice-president for construction and
development in Dayton, Ohio, has asked the Hamburg office to do a preliminary site search
based on location, geography, transportation, proximity to customers, and costs. The Hamburg
office has identified five potential sites in Dresden, Lodz, Hamburg, Gdansk, and Frankfurt. The
Hamburg office has forwarded information about each of these sites to corporate headquarters,
including forecasts of the number of containers shipped annually to each customer as follows:
Vienna, 160; Leipzig, 100; Budapest, 180; Prague, 210; Krakow, 90; Munich, 120; and
Frankfurt, 50. When the vice-president of construction in Dayton received this information, he
pulled out his map of Europe and began to study the sites.
Assist AIAI with its site selection process in Europe. Recommend a site form the five
possibilities, and indicate what other location factors you might consider in the selection
process.
Scenario: You are an independent consultant, hired by the Vice President of Construction,
American International Automotive Industries (AIAI). Conduct an appropriate quantitative
analysis and provide the vice president with a decision support paper addressing the
issues within the Case Problem.
Specific guidance: You are expected to use the quantitative analysis methods within this
module to arrive at conclusions and provide supported recommendations within your
formal paper. You should select appropriate graphical presentation methodologies to
present this material within the paper. Include all computation materials as appendices to
the completed report.

S Kalra, It has been a little while since I have…

S Kalra, It has been a little while since I have…

S Kalra,
It has been a little while since I have talked to you on this site. I hope that everything has been good for you. I am contacting you because I need your help once again. I have attached the instructions for a case study project from the course I am taking right now. Everything will make since when you see the attachment. The company that I would like on the paper is Wal-Mart Company. I hope that you will be able to help me with this project over the next four weeks. The first part of this project is due on Sunday 03 Aug 2014. Thanks again.

MULTI-MODULE COMPREHENSIVE PROBLEM ASSIGNMENT
Background:
The purpose of this comprehensive project is to use a variety of resources to research a corporation. You will
also prepare a written paper describing your corporation and summarizing the findings you have developed in
the first three parts of the project.
Instructions: First choose a company to research. The company must be publicly traded, not the company
where you currently work. Your selection may be a competitor of the company you currently work for, a
company related to a hobby of yours, a possible stock investment, or simply sound interesting. Each student will
select a different company; however companies may be within the same industry.
Module

5

Activity
Case Study Part I: Company Background
See specific details below.

6

Case Study Part II: Compute Ratios
See specific details below.

7

Case Study Part III: Compare Ratios to Industry Norms
See specific details below.

8

Case Study Final Written Paper
See specific details below.

Activity Type
Written Assignment

Written Assignment

Written Assignment

Written Assignment

Required Part I Module Five
A. Research and then describe your company's primary business activities. Include:
1. A brief historical summary,
2. A list of competitors,
3. The company's position within the industry,
4. Recent developments within the company/industry,
5. Future direction, and
6. Other items of significance to your corporation.
B. Include information from a variety of resources. For example:
1. Consult the Form 10-K filed with the SEC.
2. Review the Annual Report and especially the Letter to Shareholders
3. Explore the corporate website.
4. Select at least two significant news items from recent business periodicals
C. Submit a written report that is 2-4 pages long. The report should be well written with introductory and
concluding paragraphs. References must be appropriately cited. Be sure to address all of the points in
Section A above, using all of the resources listed in Section B.

Format: Double-spaced, one-inch margins, using a 12-point Times New Roman font. Include a complete
bibliography.
Required Part II Module Six:
The purpose of the second part of the comprehensive project is to compute financial statement ratios.
A. Based on formulas given in Appendix B, compute the following ratios in Excel for two years.
1. Debt ratio
2. Gross profit margin
3. Free cash flow
4. Times interest earned
5. Accounts receivable turnover
6. Inventory turnover
C. Prepare a DuPont Analysis of ROE for two years, including computations of
1. Return on Sales
2. Asset Turnover
3. Return on Assets
4. Financial Leverage
5. Return on Equity
D. Briefly evaluate the ratio trends. Indicate on your worksheet whether each ratio is:
1. stronger / weaker
2. quicker /slower
3. more / less liquid
4. more / less risk
E. Submit a report. Write a 2-4 page report evaluating trends in all of the above ratios. Discuss whether
your companys profitability, efficiency, liquidity, and solvency are improving or deteriorating.

Format: Double-spaced, one-inch margins, using a 12-point Times New Roman font.

Required Part III Module Seven:
The purpose of the third part of the comprehensive project is to use resources available to obtain industry
averages for commonly used ratios. Additionally you will compare company ratio results to industry averages.
A. Obtain the four-digit primary SIC (Standard Industrial Classification) Code and industry title for your
company. Record the primary SIC code and industry title at the top of the Ratio Analysis Worksheet.
B. Obtain industry averages for commonly used ratios in the current period. Industry average information
is reported by industry title or SIC code.
C. Look up the following industry-average ratios:
1. Current ratio
2. Debt ratio
3. Gross profit margin
4. Times interest earned
5. Accounts receivable turnover
Note that some industry averages may
6. Inventory turnover
not apply to your company.
7. Return on Sales
8. Asset Turnover
9. Return on Assets
10. Financial Leverage
11. Return on Equity
D. Submit a report. Write a 2-4 page report comparing the above ratios to industry averages. Discuss
whether your companys profitability, efficiency, liquidity, and solvency are better than, or worse then,
its peers.

Format: Double-spaced, one-inch margins, using a 12-point Times New Roman font.
Required Part IV Module Eight:
A.

Prepare a well-written titled Would You Advise a Friend to Invest in This Company? based upon your
research and analysis of this company's financial information. Identify 3-5 significant points that justify
your conclusion. Support your points with a comprehensive explanation incorporating sound reasoning.

B. Submit a report that is 4-5 pages long. The report should be well written with introductory and
concluding paragraphs. References must be appropriately cited.

Format: Double-spaced, one-inch margins, using a 12-point Times New Roman font.

Biology Research Paper

Biology Research Paper

Addresses course outcomes 1–3:

1. recognize and apply the scientific method to forensic evidence to make decisions and solve problems

2. synthesize and apply forensic science knowledge and methods to evaluate evidence and perform casework

3. effectively communicate forensic information in an ethical manner to legal and other stakeholders for application in legal processes, publications, and policy decisions

The research project has two parts:

    your final research project, submitted to the week 8 conference and to your Assignments folder
    submission to the week 8 conference, and comments on the research projects of at least two classmates. Comments should adhere to the expectations about conference discussions described in the syllabus above.


The final research project can be presented in a variety of formats. You will be free to choose whether you will create

    a PowerPoint presentation with fully detailed narration (detailed text in the Notes section that includes citations). The PowerPoint presentation could be based on a case study or crime scene investigation, or be based on any of the topics provided below. The PowerPoint presentation must also meet the research paper criteria discussed below.
    a case study
    a crime scene investigation
    a conventional five- to seven-page paper
    a training document for investigators
    a communication report to stakeholders
    an investigative report for a fictional newspaper
    educational materials to be used by high school teachers (includes lecture notes for the teacher and hands-on learning activities for high school students)
    a public service announcement to inform the public about one of the topics below (provide all the text and reference sources; you must still meet all the criteria for the paper described below)


The final research paper should be at least seven well-written, double-spaced pages long (excluding the reference section) and must be your own work. You will be expected to demonstrate an in-depth and clear understanding of the topic you select. See the list below for possible topics for your research paper.

In addition to depth of knowledge of the subject matter, your paper will be evaluated for clarity, proper sentence and paragraph structure, and proper resource citation. See the writing resources listed above in the syllabus, and also check with the Effective Writing Center if you need additional assistance.

Reference citations must be provided in APA format, and are not included in the page count. Check with the Effective Writing Center if you require help with this format or need help with review of your paper. There should be a minimum of 10 references, and at least three of them must be original, primary research articles. The original research sources (publications) may come from the Journal of Forensic Sciences, Forensic Science International, or other peer-reviewed sources.

Here is a general, overall forensic information sources link: http://www.library.ucsb.edu/istl/03-spring/internet.html.

Suggested Topics

The following are suggested topics for the BIOL 320 research project. Novel topics in forensic biology are welcome, but they must first be approved by the third week of the course.

    Forensic biology databases: Thoroughly research one of the following: including CODIS, STRbase, mtDNA databases, Y-STR databases, fingerprint databases, hair databases, biometric databases, facial recognition/databases, iris recognition/databases, voice recognition/databases, and forensic information or interactive databases.
    National Academy of Sciences report, Strengthening Forensic Science in the United States: A Path Forward: Thoroughly research this report and its recommendations for the forensic field, then include your opinion of whether an independent government agency should be formed, the National Institute of Forensic Sciences. Link: http://books.nap.edu/openbook.php?record_id=12589&page=281.
    Forensic serology testing: Make a detailed study of serological testing and applications.
    Forensic botany: We don't cover this in class, but it is certainly a valid forensic field of study.
    Forensic entomology: This includes forensically relevant studies of insects, such as postmortem interval and detection of human DNA from certain insects, such as mosquitos, lice, ticks, etc.
    Fish and wildlife applications of forensics: This includes novel applications and methods used in fish and wildlife cases.
    Animal forensics: This includes forensic DNA identification of domestic animals.
    Forensic hair analysis: This includes forensic hair comparisons and studies.
    Forensic DNA analysis: This includesshort tandem repeat (STR) new developments, single nucleotide polymorphism (SNP) used in forensics, mitochondrial DNA analysis (mtDNA) new developments,X chromosomal STR studies, and Y chromosomal STR studies. See http://www.cstl.nist.gov/strbase/.
    Microbial forensics: This includes forensic studies related to microorganisms.
    Forensic toxicology: This includes new methods and applications, and forensic testing of designer/synthetic drugs. See http://home.lightspeed.net/~abarbour/vlibft.html.
    Forensic pathology: This includes medical examiners, death investigations, and novel forensic pathology findings in cases.
    Forensic biology validation studies: This includes research on validation studies done for a particular subject in forensic biology, e.g. DNA, fingerprints, etc.


You are expected to submit a final version of this research project to the week 8 conference at the beginning of week 8 and to your Assignments folder. Use the research assignment calculator to track the development of your research project to help ensure that you will complete it in time for submission at the beginning of week 8.