StatisticalTerms – AU_BUS499

StatisticalTerms – AU_BUS499

I have attached the assignment that I need help on. Not a very strong area for me and I am having a hard time with the math. Would really appreciate the help. I have also attached a statistical terms sheet that was given. Thank yo

SAMPLING MEAN:

DEFINITION:

The term sampling mean is a statistical term used to describe the properties of statistical distributions. In statistical terms, the sample mean  from a group of observations is an estimate of the population mean . Given a sample of size n, consider n independent random variables X1, X2... Xn, each corresponding to one randomly selected observation. Each of these variables has the distribution of the population, with mean  and standard deviation . The sample mean is defined to be  


WHAT IT IS USED FOR:

 It is also used to measure central tendency of the numbers in a database. It can also be said that it is nothing more than a balance point between the number and the low numbers.

HOW TO CALCULATE IT:

 To calculate this, just add up all the numbers, then divide by how many numbers there are.

Example: what is the mean of 2, 7, and 9?
Add the numbers: 2 + 7 + 9 = 18
Divide by how many numbers (i.e., we added 3 numbers): 18 ÷ 3 = 6
So the Mean is 6










SAMPLE VARIANCE:
DEFINITION: 
The sample variance, s2, is used to calculate how varied a sample is. A sample is a select number of items taken from a population. For example, if you are measuring American people’s weights, it wouldn’t be feasible (from either a time or a monetary standpoint) for you to measure the weights of every person in the population. The solution is to take a sample of the population, say 1000 people, and use that sample size to estimate the actual weights of the whole population.
 WHAT IT IS USED FOR: 
The sample variance helps you to figure out the spread out in the data you have collected or are going to analyze. In statistical terminology, it can be defined as the average of the squared differences from the mean.
HOW TO CALCULATE IT:
 Given below are steps of how a sample variance is calculated: 
•	Determine the mean
•	Then for each number: subtract the Mean and square the result
•	Then work out the mean of those squared differences.
To work out the mean, add up all the values then divide by the number of data points.
First add up all the values from the previous step. 
But how do we say "add them all up" in mathematics? We use the Roman letter Sigma: ?
The handy Sigma Notation says to sum up as many terms as we want.

•	Next we need to divide by the number of data points, which is simply done by multiplying by "1/N":
Statistically it can be stated by the following:
•	 
•	This value is the variance

EXAMPLE:
Sam has 20 Rose Bushes. 
The number of flowers on each bush is 
9, 2, 5, 4, 12, 7, 8, 11, 9, 3, 7, 4, 12, 5, 4, 10, 9, 6, 9, 4 
Work out the sample variance
 
Step 1. Work out the mean
In the formula above, ? (the Greek letter "mu") is the mean of all our values.
For this example, the data points are: 9, 2, 5, 4, 12, 7, 8, 11, 9, 3, 7, 4, 12, 5, 4, 10, 9, 6, 9, 4 
The mean is:
(9+2+5+4+12+7+8+11+9+3+7+4+12+5+4+10+9+6+9+4) / 20 = 140/20 = 7 
So:
? = 7

Step 2. Then for each number: subtract the Mean and square the result
This is the part of the formula that says:
 
So what is xi? They are the individual x values 9, 2, 5, 4, 12, 7, etc...
In other words x1 = 9, x2 = 2, x3 = 5, etc.	
So it says "for each value, subtract the mean and square the result", like this
Example (continued): 
(9 - 7)2 = (2)2 = 4
(2 - 7)2 = (-5)2 = 25
(5 - 7)2 = (-2)2 = 4
(4 - 7)2 = (-3)2 = 9
(12 - 7)2 = (5)2 = 25
(7 - 7)2 = (0)2 = 0
(8 - 7)2 = (1)2 = 1
We need to do this for all the numbers 

Step 3. Then work out the mean of those squared differences.
To work out the mean, add up all the values then divide by how many.
First add up all the values from the previous step. 
 
= 4+25+4+9+25+0+1+16+4+16+0+9+25+4+9+9+4+1+4+9 = 178
But that isn't the mean yet, we need to divide by how many, which is simply done by multiplying by "1/N":
Mean of squared differences = (1/20) × 178 = 8.9
This value is called the variance.

 


STANDARD DEVIAITON:

DEFINITION:
This descriptor shows how much variation or dispersion from the average exists. 
The symbol for Standard Deviation is ? (the Greek letter sigma).

It is calculated using:
 
In case of a sample the ‘N’ in this formula is replaced by n-1.

WHAT IT IS USED FOR:
It is used to determine the expected value. A low standard deviation indicates that the data points tend to be very close to the mean (also called expected value); a high standard deviation indicates that the data points are spread out over a large range of values.

HOW TO CALCULATE IT:

To determine the standard deviation, you need to take the square root of the variance.

EXAMPLE PROBLEM:
Let’s look at the previous problem and compute the standard deviation. The standard deviation as mentioned earlier is nothing more than the measure of dispersion (spread). It can be calculated by taking the square root of the variance. In case of the previous problem where the variance was 8.9, its corresponding standard deviation would be the square root of 8.9 which is 2.983
				? = ?(8.9) = 2.983...



HYPOTHESES TESTING:
DEFINITION:

Hypothesis testing is a topic at the heart of statistics. This technique belongs to a realm known as inferential statistics. Researchers from all sorts of different areas, such as psychology, marketing, and medicine, formulate hypotheses or claims about a population being studied. 

WHAT IT IS USED FOR:

Hypothesis testing is used to determine the validity of these claims. Carefully designed statistical experiments obtain sample data from the population. The data is in turn used to test the accuracy of a hypothesis concerning a population. Hypothesis tests are based upon the field of mathematics known as probability. Probability gives us a way to quantify how likely it is for an event to occur. The underlying assumption for all inferential statistics deals with rare events, which is why probability is used so extensively. The rare event rule states that if an assumption is made and the probability of a certain observed event is very small, then the assumption is most likely incorrect. 
The basic idea here is that we test a claim by distinguishing between two different things: 
1.	An event that easily occurs by chance
2.	An event that is highly unlikely to occur by chance.
If a highly unlikely event occurs, then we explain this by stating that a rare event really did take place, or that the assumption we started with was not true.
HOW TO USE THE TEST FOR DECISION MAKING PURPOSES:
1. Formulate the null hypothesis  (commonly, that the observations are the result of pure chance) and the alternative hypothesis  (commonly, that the observations show a real effect combined with a component of chance variation). 
2. Identify a test statistic that can be used to assess the truth of the null hypothesis. 
3. Compute the P-value, which is the probability that a test statistic at least as significant as the one observed would be obtained assuming that the null hypothesis were true. The smaller the  -value, the stronger the evidence against the null hypothesis. 
4. Compare the  -value to an acceptable significance value  (sometimes called an alpha value). If  , that the observed effect is statistically significant, the null hypothesis is ruled out, and the alternative hypothesis is valid. 
EXAMPLE OF HYPOTHESIS TESTING (TWO-TAIL TEST)
If you are told that the mean weight of 3rd graders is 85 pounds with a standard deviation of 20 pounds, and you find that the mean weight of a group of 22 students is 95 pounds, do you question that that group of students is a group of third graders?
•	The z-score is ((x-bar) - µ)/(*sigma*/(n^.5)); the numerator is the difference between the observed and hypothesized mean, the denominator rescales the unit of measurement to standard deviation units. (95-85)/(20/(22^.5)) = 2.3452.
•	The z-score 2.35 corresponds to the probability .9906, which leaves .0094 in the tail beyond. Since one could have been as far below 85, the probability of such a large or larger z-score is .0188. This is the p-value. Note that for these two tailed tests we are using the absolute value of the z-score.
________________________________________

•	Because .0188 < .05, we reject the hypothesis (which we shall call the null hypothesis) at the 5% significance level; if the null hypothesis were true, we would get such a large z-score less than 5% of the time. Because .0188 > .01, we fail to reject the null hypothesis at the 1% level; if the null hypothesis were true, we would get such a large z-score more than 1% of the time.

DECISION TREE:
DEFINITION:
A schematic tree-shaped diagram used to determine a course of action or show a statistical probability. Each branch of the decision tree represents a possible decision or occurrence. The tree structure shows how one choice leads to the next, and the use of branches indicates that each option is mutually exclusive.
WHAT IT IS USED FOR:
A decision tree can be used to clarify and find an answer to a complex problem. The structure allows users to take a problem with multiple possible solutions and display it in a simple, easy-to-understand format that shows the relationship between different events or decisions. The furthest branches on the tree represent possible end results.
HOW TO APPLY IT:
1.	As a starting point for the decision tree, draw a small square around the center of the left side of the paper. If the description is too large to fit the square, use legends by including a number in the tree and referencing the number to the description either at the bottom of the page or in another page.
2.	Draw out lines (forks) to the right of the square box. Draw one line each for each possible solution to the issue, and describe the solution along the line. Keep the lines as far apart as possible to expand the tree later.
3.	Illustrate the results or the outcomes of the solution at the end of each line. If the outcome is uncertain, draw a circle (chance node). If the outcome leads to another issue, draw a square (decision node). If the issue is resolved with the solution, draw a triangle (end node). Describe the outcome above the square or circle, or use legends, as appropriate.
4.	Repeat steps 2 through 4 for each new square at the end of the solution lines, and so on until there are no more squares, and all lines have either a circle or blank ending.
5.	The circles that represent uncertainty remain as they are. A good practice is to assign a probability value, or the chance of such an outcome happening.
Since it is difficult to predict at onset the number of lines and sub-lines each solution generates, the decision tree might require one or more redraws, owing to paucity of space to illustrate or represent options and/or sub-options at certain spaces.
It is a good idea to challenge and review all squares and circles for possible overlooked solutions before finalizing the draft.
EXAMPLE:
Your company is considering whether it should tender for two contracts (MS1 and MS2) on offer from a government department for the supply of certain components. The company has three options: 
•	tender for MS1 only; or 
•	tender for MS2 only; or 
•	tender for both MS1 and MS2. 
If tenders are to be submitted, the company will incur additional costs. These costs will have to be entirely recouped from the contract price. The risk, of course, is that if a tender is unsuccessful, the company will have made a loss. 
The cost of tendering for contract MS1 only is $50,000. The component supply cost if the tender is successful would be $18,000. 
The cost of tendering for contract MS2 only is $14,000. The component supply cost if the tender is successful would be $12,000. 
The cost of tendering for both contracts MS1 and MS2 is $55,000. The component supply cost if the tender is successful would be $24,000. 
For each contract, possible tender prices have been determined. In addition, subjective assessments have been made of the probability of getting the contract with a particular tender price as shown below. Note here that the company can only submit one tender and cannot, for example, submit two tenders (at different prices) for the same contract. 
Option            Possible     Probability
                       tender        of getting
                       prices ($)    contract

MS1 only         130,000      0.20
                         115,000      0.85

MS2 only          70,000       0.15
                          65,000       0.80
                          60,000       0.95

MS1 and MS2   190,000      0.05
                          140,000      0.65
In the event that the company tenders for both MS1 and MS2 it will either win both contracts (at the price shown above) or no contract at all. 
•	What do you suggest the company should do and why?
•	What are the downside and the upside of your suggested course of action? 
•	A consultant has approached your company with an offer that in return for $20,000 in cash, she will ensure that if you tender $60,000 for contract MS2, only your tender is guaranteed to be successful. Should you accept her offer or not and why? 
________________________________________
Solution 
The decision tree for the problem is shown below.

Below we carry out step 1 of the decision tree solution procedure which (for this example) involves working out the total profit for each of the paths from the initial node to the terminal node (all figures in $'000). 
Step 1
•	path to terminal node 12, we tender for MS1 only (cost 50), at a price of 130, and win the contract, so incurring component supply costs of 18, total profit 130-50-18 = 62 
•	path to terminal node 13, we tender for MS1 only (cost 50), at a price of 130, and lose the contract, total profit -50 
•	path to terminal node 14, we tender for MS1 only (cost 50), at a price of 115, and win the contract, so incurring component supply costs of 18, total profit 115-50-18 = 47 
•	path to terminal node 15, we tender for MS1 only (cost 50), at a price of 115, and lose the contract, total profit -50 
•	path to terminal node 16, we tender for MS2 only (cost 14), at a price of 70, and win the contract, so incurring component supply costs of 12, total profit 70-14-12 = 44 
•	path to terminal node 17, we tender for MS2 only (cost 14), at a price of 70, and lose the contract, total profit -14 
•	path to terminal node 18, we tender for MS2 only (cost 14), at a price of 65, and win the contract, so incurring component supply costs of 12, total profit 65-14-12 = 39 
•	path to terminal node 19, we tender for MS2 only (cost 14), at a price of 65, and lose the contract, total profit -14 
•	path to terminal node 20, we tender for MS2 only (cost 14), at a price of 60, and win the contract, so incurring component supply costs of 12, total profit 60-14-12 = 34 
•	path to terminal node 21, we tender for MS2 only (cost 14), at a price of 60, and lose the contract, total profit -14 
•	path to terminal node 22, we tender for MS1 and MS2 (cost 55), at a price of 190, and win the contract, so incurring component supply costs of 24, total profit 190-55- 24=111 
•	path to terminal node 23, we tender for MS1 and MS2 (cost 55), at a price of 190, and lose the contract, total profit -55 
•	path to terminal node 24, we tender for MS1 and MS2 (cost 55), at a price of 140, and win the contract, so incurring component supply costs of 24, total profit 140-55- 24=61 
•	path to terminal node 25, we tender for MS1 and MS2 (cost 55), at a price of 140, and lose the contract, total profit -55 
Hence we can arrive at the table below indicating for each branch the total profit involved in that branch from the initial node to the terminal node. 
Terminal node    Total profit $'000
12               62
13               -50
14               47
15               -50
16               44
17               -14
18               39
19               -14
20               34
21               -14
22               111
23               -55
24               61
25               -55
We can now carry out the second step of the decision tree solution procedure where we work from the right-hand side of the diagram back to the left-hand side. 
Step 2
•	For chance node 5 the EMV is 0.2(62) + 0.8(-50) = -27.6 
•	For chance node 6 the EMV is 0.85(47) + 0.15(-50) = 32.45 
Hence the best decision at decision node 2 is to tender at a price of 115 (EMV=32.45). 
•	For chance node 7 the EMV is 0.15(44) + 0.85(-14) = -5.3 
•	For chance node 8 the EMV is 0.80(39) + 0.20(-14) = 28.4 
•	For chance node 9 the EMV is 0.95(34) + 0.05(-14) = 31.6 
Hence the best decision at decision node 3 is to tender at a price of 60 (EMV=31.6). 
•	For chance node 10 the EMV is 0.05(111) + 0.95(-55) = -46.7 
•	For chance node 11 the EMV is 0.65(61) + 0.35(-55) = 20.4 
Hence the best decision at decision node 4 is to tender at a price of 140 (EMV=20.4). 
Hence at decision node 1 we have three alternatives: 
•	tender for MS1 only EMV=32.45 
•	tender for MS2 only EMV=31.6 
•	tender for both MS1 and MS2 EMV = 20.4 
Hence the best decision is to tender for MS1 only (at a price of 115) as it has the highest expected monetary value of 32.45 ($'000). 

INFLUENCE OF SAMPLE SIZE:
DEFINITION:
Sample size is one of the four interrelated features of a study design that can influence the detection of significant differences, relationships, or interactions. Generally, these survey designs try to minimize both alpha error (finding a difference that does not actually exist in the population) and beta error (failing to find a difference that actually exists in the population).


WHAT IT IS USED FOR:

The sample size used in a study is determined based on the expense of data collection and the need to have sufficient statistical power.

HOW TO USE IT:

We already know that the margin of error is 1.96 times the standard error and that the standard error is sq.rt ^p(1????^p)/n. In general, the formula is ME =  z sq.rt ^p(1-^p)/n
where
*ME is the desired margin of error
*z is the z-score, e.g., 1.645 for a 90% confidence interval, 1.96 for a 90% confidence interval, 2.58 for a 99% confidence interval 
_ ^p is our prior judgment of the correct value of p.
_ n is the sample size (to be found)


EXAMPLE:

If ^p =0.3 and Z=1.96 and ME =0.025 then the necessary sample size is:

ME= Z sq.rt (^p*1-^p)/n

0.025 = 1:96 sq.rt (0.3*0.7)/n

n=1291 or 1300 students


POPULATION MEAN:

DEFINITION:

The population mean is the mean of a numerical set that includes all the numbers within the entire group.

WHAT IT IS USED FOR:

In most cases, the population mean is unknown and the sample mean is used for validation purposes. However, if we want to calculate the population mean, we will have to construct the confidence interval. This can be achieved by the following steps: 

HOW TO USE IT:
•	The sample statistic is the sample mean x¯ 
•	The standard error of the mean is s/sq.rt n where s is the standard deviation of individual data values. 
•	The multiplier, denoted by t*, is found using the t-table in the appendix of the book. It's a simple table. There are columns for .90, .95, .98, and .99 confidence. Use the row for df = n ? 1. 
•	Thus the formula for a confidence interval for the mean is x¯±t? (s/sq.rt n)

EXAMPLE:

In a class survey, students are asked if they are sleep deprived or not and also are asked how much they sleep per night. Summary statistics for the n = 22 students who said they are sleep deprived are:
 
•	Thus n = 22, x¯ = 5.77, s = 1.572, and standard error of the mean =  1.572/sq.rt 22=0.335 
•	A confidence interval for the mean amount of sleep per night is 5.77 ± t* (0.335) for the population that feels sleep deprived. 
•	Go to the t-table in the appendix of the book and use the df = 22 – 1 = 21 row. For 95% confidence the value of t* = 2.08. 
•	A 95% confidence interval for ? is 5.77 ± (2.08) (0.335), which is 5.77 ± 0.70, or 5.07 to 6.7
•	Interpretation: With 95% confidence we estimate the population mean to be between 5.07 and 6.47 hours per night. 

RANDOM SAMPLING
Random sampling is a sampling technique where we select a group of subjects (a sample) for study from a larger group (a population). Each individual is chosen entirely by chance and each member of the population has a known, but possibly non-equal, chance of being included in the sample.
By using random sampling, the likelihood of bias is reduced.
WHEN RANDOM SAMPLING IS USED:

Random sampling is used when the researcher knows little about the population. 

THE STEPS ASSOCIATED WITH RANDOM SAMPLING:

1.	Define the population
2.	Choose your sample size
3.	List the population
4.	Assign numbers to the units
5.	Find random numbers
6.	Select your sample

EXAMPLE:

In a study, 10,000 students will be invited to take part in the research study. The selection was limited to 200 randomly selected students. In this case, this would mean selecting 200 random numbers from the random number table. Imagine the first three numbers from the random number table were:
0011	(the 11th student from the numbered list of 10,000 students)
9292	(the 9,292nd student from the list)
2001	(the 2,001st student from the list)
We would select the 11th, 9,292nd, and 2,001st students from our list to be part of the sample. We keep doing this until we have all 200 students that we want in our sample.



SAMPLING DISTRIBUTION:
DEFINITION:
The sampling distribution is a theoretical distribution of a sample statistic. There is a different sampling distribution for each sample statistic. Each sampling distribution is characterized by parameters, two of which are  and . The latter is called the standard error. 
WHAT IT IS USED FOR:
It is used for making probability statements in inferential statistics.
HOW IS SAMPLING DISTRIBUTION USED?
Step 1: Obtain a simple random sample of size n.
Step 2: Compute the sample mean.
Step 3: Assuming we are sampling from a finite population, repeat Steps 1 and 2 until all simple random samples of size n have been obtained. 
EXAMPLE OF SAMPLING DISTRIBUTION:
THE SAMPLE DISTRIBUTION
The sample distribution is the distribution resulting from the collection of actual data. A major characteristic of a sample is that it contains a finite (countable) number of scores, the number of scores represented by the letter N. For example, suppose that the following data were collected:
32	35	42	33	36	38	37	33	38	36	35	34	37	40	38	36	35	31	37	36	33
36	39	40	33	30	35	37	39	32	39	37	35	36	39	33	31	40	37	34	34	37
These numbers constitute a sample distribution. Using the procedures discussed in the chapter on frequency distributions, the following relative frequency polygon can be constructed to picture this data:
 
SAMPLING ERROR:
DEFINITION:
The error that arises as a result of taking a sample from a population rather than using the whole population.
WHAT IT IS USED FOR:
It is used to detect the difference between the sample and the true, but unknown value of population parameter.
HOW TO USE IT/CALCULATE IT:
•	Determine the level of confidence followed by the critical values
•	Calculate the sample standard deviation
•	Calculate the margin of error using
 E = Critical value * sample standard deviation/sq.rt of sample size
EXAMPLE:
1.	What is the margin of error for a simple random sample of 900 people at a 95% level of confidence? The sample standard deviation is 2.
By use of the table we have a critical value of 1.96, and so the margin of error is 1.96/(2 ? 900 = 0.03267, or about 3.3%.
2.	What is the margin of error for a simple random sample of 1600 people at a 95% level of confidence and a sample standard deviation of 2?
At the same level of confidence as the first example, increasing the sample size to 1600 gives us a margin of error of 0.0245, or about 2.5%.
This shows that by increasing the sample size, the margin of error decreases.

PROBABILITY:

DEFINITION:
 
Probability is the chance that something will happen — how likely it is that some event will occur.

WHAT IT IS USED FOR:
Probability is used in various areas, such as assessing risks in medical treatment, forecasting weather, what to sell at a discount and when to sell it, determining car insurance rates, determining future commercial and manufacturing construction, in developing other real estate, in municipal planning for such things as placing new roads, and in financial planning at home and in the business world.
HOW TO CALCUATE IT:
1. Count the number of all distinctive and equally likely outcomes of the experiment. Let that be n.
2. Count the number of distinctive outcomes that represent the occurrence of the event in question. Let that be ne.
3. Calculate the result of the division ne/n. That is the probability of the event.

EXAMPLE:

Find the probability of getting an even number after rolling a die.

•	Event: Getting an even number
•	Steps above: 
•	Distinctive outcomes: 1, 2, 3, 4, 5, 6 are all the outcomes, their count n=6 
•	Outcomes representing the event: 2, 4, 6 are all the even numbers you can get, their count ne=3 
•	Probability: P = ne/n = 3/6 = 0.5 or 1/2 


POWER CURVE:

DEFINITION:

Power curves illustrate the effect on power of varying the alternate hypothesis.

WHAT IT IS USED FOR:

 The curve illustrates how a sample of observations with a defined variance is quite powerful in correctly rejecting the null hypothesis (for example, if m0=8) when the true mean is less than 6 or greater than 10. The curve also illustrates that the test is not powerful — it may not reject the null hypothesis even when the true mean differs from m0 — when the difference is small. This is also extensively used in testing the relationship between power and sample size.

HOW IT IS USED:

See example below.

EXAMPLE:

If the researcher learns from literature that the population follows a normal distribution with mean of 100 and variance of 100 under the null hypothesis and he/she expects the mean to be greater than 105 or less than 95 under the null hypothesis and he/she wants the test to be significant at 95% level, the resulting power function would be:
Power=1-?[1.96-(105-100)/(10/n)]+?[-1.96-(95-100)/(10/n)], which is, 
Power=1-?[1.96-n/2]+?[-1.96+n/2]. 
	That function shows a relationship between power and sample size. For each level of sample size, there is a corresponding sample size. For example, if n=20, the corresponding power level would be about 0.97, or, if the power level is 0.95, the corresponding sample size would be 16.	


PROBABILITY DISTRIBUTION:

DEFINITION:

A statistical function that describes all the possible values and likelihoods that a random variable can take within a given range. At times it is presented in the form of a table or an equation that links the outcome of a statistical experiment with its probability of occurrences.

HOW IT IS USED:

It establishes a range that will be between the minimum and maximum statistically possible values, but where the possible values are likely to be plotted on the probability distribution depends on a number of factors, including the distribution mean, standard deviation, skewness, and kurtosis.

HOW TO USE IT:

•	Identify the event
•	Create a table showing the possibility of its occurrence

EXAMPLE:
An example will make clear the relationship between random variables and probability distributions. Suppose you flip a coin two times. This simple statistical experiment can have four possible outcomes: HH, HT, TH, and TT. Now, let the variable X represent the number of Heads that result from this experiment. The variable X can take on the values 0, 1, or 2. In this example, X is a random variable because its value is determined by the outcome of a statistical experiment.
A probability distribution is a table or an equation that links each outcome of a statistical experiment with its probability of occurrence. Consider the coin flip experiment described above. The table below, which associates each outcome with its probability, is an example of a probability distribution.
Number of heads	Probability
0	0.25
1	0.50
2	0.25
The above table represents the probability distribution of the random variable X.

EXPECTED VALUE OF SAMPLE INFORMATION:
DEFINITION:
In decision theory, the expected value of sample information is the expected increase in utility that you could obtain from gaining access to a sample of additional observations before making a decision.

WHAT IS IT USED FOR?

Calculate the Expected Monetary Value (EMV) of each alternative action.

HOW TO USE IT/CALCULATE IT?

1.	Determine the optimal decision and its expected return for the possible outcomes of the sample using the posterior probabilities for the states of nature
2.   	Calculate the values of the optimal returns
3.	Subtract the EV of the optimal decision obtained without using the sample information from the amount determined in step (2)

EXAMPLE:


The expected value of sample information is computed as follows:

Suppose you were going to make an investment into only one of three investment vehicles: stock, mutual fund, or certificate of deposit (CD). Further suppose that the market has a 50% chance of increasing, a 30% chance of staying even, and a 20% chance of decreasing. If the market increases, the stock investment will earn $1500 and the mutual fund will earn $900. If the market stays even, the stock investment will earn $300 and the mutual fund will earn $600. If the market decreases, the stock investment will lose $800 and the mutual fund will lose $200. The certificate of deposit will earn $500 independent of the market's fluctuation.
Question:
What is the expected value of perfect information?
Solution:
Expectation for each vehicle:
 
 
 
The maximum of these expectations is the stock vehicle. Not knowing which direction the market will go (only knowing the probability of the directions), we expect to make the most money with the stock vehicle.
Thus,
 
On the other hand, consider if we did know ahead of time which way the market would turn. Given the knowledge of the direction of the market, we would (potentially) make a different investment vehicle decision.
Expectation for maximizing profit given the state of the market:
 
That is, given each market direction, we choose the investment vehicle that maximizes the profit.
Hence,
 
Conclusion:
Knowing the direction the market will go (i.e., having perfect information) is worth $350.


EXPECTED VALUE OF SAMPLE INFORMATION:
DEFINITION: 
In decision theory, the expected value of sample information (EVSI) is the expected increase in utility that you could obtain from gaining access to a sample of additional observations before 
making a decision.

WHAT IT IS USED FOR:

EVSI attempts to estimate what this improvement would be before seeing actual sample data; hence, EVSI is a form of what is known as preposterior analysis.
HOW IT IS CALCULATED:
See example below:
EXAMPLE:
Thompson Lumber Company is trying to decide whether to expand its product line by manufacturing and marketing a new product which is “backyard storage sheds.” The courses of action that may be chosen include:
•	Large plant to manufacture storage shed
•	Small plant to manufacture storage shed
•	Build no plant at all
				THOMSON LUMBER COMPANY
ALTERNATIVES			FAVORABLE MARKET			UNFAVORABLE MARKET
Construct a Large Plant			$200,000				$-180,000
Construct a Small Plant			$100,000				$-20,000
Do Nothing				$0					$0
ANALYSIS
ALTERNATIVES		FAVORABLE MARKET	UNFAVORABLE MARKET	EMV COMPUTED
Construct a large plant	$200,000		$-180,000	(0.5)(200,000)+(0.5)(-180,000)=$10,000
Construct a small plant  $100,000		$-20,000	(0.5)(100,000)+(0.5)(-20,000)=$40,000
Do Nothing		$0			$0			$0




EVSI = Expected value of best decision with sample information (assuming no cost to gather it)-Expected value of best decision without sample information

EVSI = $49,200 - $40,000 = $9,200
And since the EVPI was previously calculated to be $60,000,
Thompson would be willing to pay up to $9,200 for this test information, with an efficiency of (9200/60000)*100 = 15.3%




SIGNIFICANCE LEVELS:

DEFINITION:

It is a property of the distribution of a test statistic. Significance is a statistical term that tells how sure you are that a difference or relationship exists. 

 WHAT IT IS USED FOR:

The significance level of a test is the probability that the test statistic will reject the null hypothesis when the [hypothesis] is true. 


STEPS USED IN ANALYSIS:

Decide on the critical alpha level you will use (i.e., the error rate you are willing to accept).
Conduct the research.
Calculate the statistic.
Compare the statistic to a critical value obtained from a table.

EXAMPLE 
Null Hypothesis: m =64
Alternative Hypothesis: m>64
Test data:
X=64 (mean_
s=3.15(sample standard deviation)
m=64 (Population mean)
a=0.05 (significance level)
For this example, the test statistic is:
t n-1 = `x  - m
             s /Ö n
Check to see if you really understand why it is a t-value and not a z-value.
Now substitute the given values and get a value for t
 
t n-1 =     66 -   64  
              3.15/ Ö25

t n-1 =          2    
                 0.53

t n-1 =   3.77
 
P-value
p-value = P( t  > 3.77  )
                 
                                    
So the p-value is smaller than 0.0005, in symbols p-value < 0.0005
Note: When you have a “not equal to” alternative hypothesis, you have to multiply by two as you have only found half of the p-value.
Decision
Well, we have to decide whether to reject or not reject the Null Hypothesis.
If the p-value bigger than 0.05 then do not reject the Null Hypothesis
If the p-value smaller than 0.05 then reject the Null Hypothesis
 

TYPE I AND TYPE II ERRORS:

DEFINITION:
Type I & Type II Error	
The first kind of error that is possible involves the rejection of a null hypothesis that is actually true. This kind of error is called a type I error, and is sometimes called an error of the first kind.
The other kind of error that is possible occurs when we do not reject a null hypothesis that is false. This sort of error is called a type II error, and is also referred to as an error of the second kind.
WHAT IT IS USED FOR:
It is not used for anything. It is basically a classification of an error.
HOW IT IS USED IN CALCULATIONS:
See example below:
EXAMPLE (TYPE I ERROR)
If the cholesterol level of healthy men is normally distributed with a mean of 180 and a standard deviation of 20, and men with cholesterol levels over 225 are diagnosed as not healthy, what is the probability of a type one error?
z=(225-180)/20=2.25; the corresponding tail area is .0122, which is the probability of a type I error.
If the cholesterol level of healthy men is normally distributed with a mean of 180 and a standard deviation of 20, at what level (in excess of 180) should men be diagnosed as not healthy if you want the probability of a type one error to be 2%?
2% in the tail corresponds to a z-score of 2.05; 2.05 × 20 = 41; 180 + 41 = 221.
EXAMPLE (TYPE II ERROR)
If men predisposed to heart disease have a mean cholesterol level of 300 with a standard deviation of 30, but only men with a cholesterol level over 225 are diagnosed as predisposed to heart disease, what is the probability of a type II error? (The null hypothesis is that a person is not predisposed to heart disease.)
z=(225-300)/30=-2.5 which corresponds to a tail area of .0062, which is the probability of a type II error (*beta*). 
If men predisposed to heart disease have a mean cholesterol level of 300 with a standard deviation of 30, above what cholesterol level should you diagnose men as predisposed to heart disease if you want the probability of a type II error to be 1%? (The null hypothesis is that a person is not predisposed to heart disease.)
1% in the tail corresponds to a z-score of 2.33 (or -2.33); -2.33 × 30 = -70; 300 - 70 = 230.


A General Manger of Harley-Davidson has to decide on the size of a new facility. The GM has narrowed the choices to two: large facility or small facility. The company has collected information on the payoffs. It now has to decide which option is the best using probability analysis, the decision tree model, and expected monetary value.

Options:

Facility	Demand Options	Probability	Actions	Expected Payoffs
Large	              Low Demand	                   0.4	               Do Nothing	           ($10)
                            Low Demand	                   0.4	              Reduce Prices	$50
                            High Demand   	     0.6		                                        $70

Small	              Low Demand	                   0.4		                                        $40
                           High Demand	                   0.6	               Do Nothing	             $40
                           High Demand	                   0.6	               Overtime	             $50
                           High Demand	                   0.6	                 Expand	             $55

 
Determination of chance probability and respective payoffs:

Build Small:	
Low Demand	     0.4($40)=$16
High Demand	     0.6($55)=$33

Build Large:	
Low Demand	     0.4($50)=$20
High Demand	     0.6($70)=$42

Determination of Expected Value of each alternative
Build Small:        $16+$33=$49
Build Large:        $20+$42=$62

- The diagram is accurate and labeled correctly. The diagram clearly illustrates the sequence of events and their probability of occurrences.	

- A step-by-step breakdown of the calculations for the chance of probability and respective payoff is clearly communicated. The results of the calculations are accurate.	

- A step-by-step breakdown of the calculations for expected value is clearly communicated. The results of the calculations are accurate.	

- Clear and concise statement explaining the decision and a description of elements that lead to the decision.

Organizational Behavior

Organizational Behavior

Dear tutor,
I need this assignment in APA format and it cannot be copy and paste overall have anything to do with plagiarism, These papers get checked for originality. I will be attaching chapter 1-12 summary review for this week 1-6.
Thank you.
Book Title & Author: Organizational Behavior, Donald Baack
Assignment Week 6:
In this assignment you will analyze the organizational behavior of your current or former employer. Describe how the following areas influence the organizational behavior in a negative or positive manner: 
a.Type of culture (Pluralism, Dualism or Salad bowl) 
b.Modes of communication in the organization (i.e., written or verbal) 
c.Nature of authority (i.e., recognized social rank) 
d.Motivational techniques (e.g. intrinsic or extrinsic used to influence productivity and performance) 
e.Areas of EQ (emotional quotient) embraced by the organization 
f.Virtual elements (i.e., teleworking and virtual offices) 



Provide examples for each item listed above and discuss how each example applies to the organization identified. Your paper must be eight to ten pages in length and use a minimum of four scholarly sources, in addition to the textbook. Your paper must be formatted according to APA style as outlined in the Ashford Writing Center 



Writing the Final Paper
The Final Paper:
1.Must be eight-to-ten double-spaced pages in length (not including the title and reference pages) and formatted according to APA style as outlined in the Ashford Writing Center. 
2.Must include a title page with the following: a.Title of paper 
b.Student’s name 
c.Course name and number 
d.Instructor’s name 
e.Date submitted 

3.Must begin with an introductory paragraph that has a succinct thesis statement. 
4.Must address the topic of the paper with critical thought.
5.Must use headers 
6.Must end with a conclusion that reaffirms your thesis. 
7.Must document a minimum of four scholarly sources, in addition to the textbook, in APA style, as outlined in the Ashford Writing Center. 
8.Must include a separate reference page, formatted according to APA style as outlined in the Ashford Writing Center. 

Network Security

Network Security

Chapter 7
Exercise question #4Page 272

4. Download and review NIST SP 800-55 Rev. 1, Perforce Measurement Guide for Information Security. Using this document, identify five measures you would be interested in finding the results from based on your home computing systems and/or network. 

investment

investment

If you are 35, want to retire in 30 years and be able to withdraw $50,000.00 for each year in retirement, and expect to live to age 85, how much do you need to invest at 9.5% each year? 

University of Michigan-Flint MGT 313 Quiz 2 Winter 2015

University of Michigan-Flint MGT 313 Quiz 2 Winter 2015

Review Test Submission: Q02

Course Intro To Management Science (Winter 2015)

Test Q02


Instructions Quiz 2 is a timed assessment. Thirty minutes are allotted for the quiz. While the system will not terminate the quiz after 30 minutes, your grace might be discounted proportionally if you exceed the allotted time.

It is recommended that prior to opening the quiz you assemble:

• any notes or texts you want for reference

• pencils, scratch paper and calculator

• a few sheets of graph paper

The latter items might be useful in answering some quantitative questions.

Good luck.

Results Displayed All Answers, Submitted Answers, Correct Answers

• Question 1

The Home?Editing?Fill?Series command will enter various kinds of series.

Answers: True

False

• Question 2

The Office Building Planning model concerns floor plans of a new office building.

Answers: True

False

• Question 3

To select two distinct rectangles of cells, select the ?rst range, hold down the Control key, and select the second range.

Selected Answer: True

Answers: True

False

• Question 4

One way to edit the information in a cell is to place the cursor on the cell and press F2.

Answers: True

False

• Question 5

Each Excel file is called a

• Question 6

How many built-in functions does Excel have?

• Question 7

=IF(“A” = “a”,1,0) evaluates to _____

• Question 8

=IF(5>= 8,average(6,7),min(5,10)) evaluates to _____

• Question 9

If the contents of C4 were copied and pasted to C11, the numerical value in C11 would be _____

• Question 10

If the contents of C4 were copied and pasted to B11, the numerical value displayed in B11 would be _____.

• Question 11

If the contents of C4 were copied and pasted to D13, the address in D13 would be _____.

• Question 12

To find the NPV of the cash flows @ discount rate shown, use the expression = C6 + NPV(_______).


Learning From the Experts

Learning From the Experts

Unit 4 Assignment: Learning From the Experts-The Importance of Market 
Research 
In your Marketplace Simulation game play today, you will be concentrating on growth options and
using market research to help you in your decision making. Bont and Hamersveld (2007) tell us 
“Today, organisations, when making key decisions, are mindful of the importance of ensuring that
they understand the views and opinions of current and potential customers and know what 
competitors are doing in the marketplace” (p.3). 
Understanding the role of market research and the many methods for conducting market research will 
be valuable for your work in this class and others in your program. Learning from Subject Matter 
Experts (SME) in market research is the focus of this week’s Assignment and Discussion. 
For this Assignment you will be: 
? Reviewing the information in this week’s readings and sources you identify in your own 
research. 
? Identifying areas about market research that are particularly interesting to you or that you 
would like to know more about. 
? Creating a set of 3-6 questions using the information you have gained in your readings and 
research that will help you gain a greater understanding of these areas. 
? Identifying a market research professional or a company where a representative can talk to 
you in more detail about the market research process. For some ideas on how you can 
identify a market research professional or company view the short video: 
http://extmedia.kaplan.edu/business/Media/GB500/u4/GB500_u4assignment.html
? Talk with your current employer and see if there is a department in your company that 
performs this function. 
? Talk with family and friends 
? Use the social media and networking sites, i.e., Facebook and LinkedIn, etc. 
? Look for companies that conduct market research and contact them 
? Contact your local Chamber of Commerce and get referrals 
? Conducting an interview with a market research professional or a company representative. 
? Using the results of this research to determine how it can be applied to the Marketplace 
Simulation.
You will post the results of your work in a 3-4 page APA formatted paper, not including cover and 
reference page, to your Unit 4 Discussion Board by Saturday night. 

industry analysis powerpoint

industry analysis powerpoint

Hello Harendra
I have another question for you, I'm sure will be the last one for this assignment, I'm willing to pay you $30 plus tips for the entire project since this will be the last question.
I need to do a presentation of my part the "industry analysis" 
the presentation will be with a power point, and what i will need from you will be the power point and the script for what i will have to say. my part is for 4-5 minutes only.
Please let me know if you will b able to do it. and I will needed to be done be Thursday morning.
I'll be using the same info from the industry analysis you did, I will attach the rubric for the whole project, remember my part is only the Industry analysis. the power point part which will be few bullet point per slide is the one due Thursday morning, and you don't have to worry about the design of the power point is just the word. and the script for what i will be explaining from the power point is due friday. 

Please let me know ASAP if you will be able to do it.
 TASK CONSULTING GROUP
Industry review: 
               Today's competitive business consulting marketplace requires a strategy that will ensure a consistent approach to offering a product or service in such a way that will outperform the current competition. However, if we methodically improve our marketing strategy, we should have a well-defined process for our day-to-day process implementation. It is of little value to have a strategy if you lack either the resources or the expertise to implement it.
	The business consulting arena is a huge business that generated over a $125 billion in revenues in 2011 according to the U.S. Census Bureau. (U.S. Census Bureau, 2011) This is an indication of just how large and lucrative business consulting is in the U.S. and that there are a lot of consulting firms to compete with. With that we see from the Institute of Management Consultants that there are, “As of May 2007, nearly 500,000 management analysts work in the US, including those employed internally to private and public sector organizations and independent consultants” (IMC, 2007)
	These are staggering numbers that give us a true scope of what is the business consulting sector. With nearly 500,000 consultants in the U.S. a consulting firm must find a true niche in order to compete with the sheer numbers of consultants that are employed in the private and public sectors. Finding your niche in the business consulting arena is a big key to whether your company will be successful and be around for years to come or whether you will be a flash in the pan. Statistics from Careers-in-business.com tell us this: “Today, technology planning, strategic services and enterprise consulting represent 35 percent, 20 percent and 15 percent roughly of the worldwide consulting spending.” (Careers-in-business.com, 2009) From this we can deduce that a business consulting group has to put its focus where there is a need. You cannot simply state that you are going to focus in only one area if that is an area that is saturated with business consults and there is therefore no growth potential. To survive in this industry you must try and become a one-of-a-kind type of consultant that brings something to the table that is not available from every other business consulting group in the sector.
TASK CONSULTING GROUP is driven by a process of changing an organization’s focus on their typical business methods and analyzing the results in accordance with our consulting group. These results will define a roadmap that guide the organization down a transforming path which will help ensuring the future success of our customers/clients organization. 
This success roadmap of consulting group will assist to our customers/clients through marketing strategy which would include pricing, promotion for distribution and advertising as key components of the overall marketing plan. Other factors such as market share, market penetration, budgets, profit margins, capital investment, financial analysis, demographic changes, government actions, cultural trends and emerging technology will also be addressed. There are several critical and important components to our clients’ business strategy that will need to be addressed to ensure success of our customers/clients. 
The first critical point will be to turn our clients’ focus to understanding the current competitiveness of their segment in the marketplace? The second focal point will be on their strategy to support their day-to-day operations? Another focal point will be strategies on gaining market share through enhanced market penetration and most importantly understanding their client base.
For chasing the above results we focus on below points:
?	We separate ourselves as a consultant by showing the current results as well as long-term commitment to the organizations by market analysis.  
?	Our service small startups which is being continuously maturing industries which need a turnaround i.e. .if a company is “stuck” and their business model is no longer working, “TASK CONSULTING GROUP” brings order to the control the Chaos and make them profitable because knows that living in the bubble of today’s market place and its long term analysis.
?	“TASK CONSULTING GROUP” mission is to Change the Paradigm of business to what is to what is possible?
?	We focus on the results to our clients that are long lasting and permanent and bring profitability to them.
?	Our values as Teamwork, Accountability, Sustainability and Knowledge uses to serve our clients as described below: 
Teamwork: useful in achieving clients’ goal, mission and values.
Accountability: we are accountable to our clients’ organizations and our accountability is at the cornerstone of their success. We give them a surety as a delivery of 100% quality result all of the time or the money back guarantee.
Sustainability: Our sustainable development and turnaround businesses are not only make a profit but also making a better world. 
Knowledge: We provide the knowledge on training and development and it’s affect to the entire organization. Therefore, it’s an awareness that bring Change and Change that is the Action that makes us difference and our motto is “Knowledge through Change affecting our Tomorrow’s.”
Our consulting group is fit to the need of our customers/clients organization if they are facing issues regarding the lack of their business where we focuses on the below steps to target the need of our customers/clients as follows: 
•	First we identify their (client organization) business and lacking issues within this business.
•	Make improvement towards those lacking areas of business and apply our business strategies.
•	Finally, it would reflect to their business success.

Regulation review and legal concerns:
                 It’s a most important decision, what would be location and business environment and this must be right before initiating any business. As “TASK CONSULTING GROUP”  where company’s business is to provide better marketing strategy so it’s a good idea to do some research about the zoning rules and regulations for the desired area of the business where we choose a city names as “Miami” this city has a wide range of tools to help us with the business process.
Choose this Miami city because in this city U.S. Department of Commerce provides partial funding and this city provides strategic partnering and in?kind cost?share support to the Miami Business Development Association (MBDA) Center that can help our consulting business. If we open our business nearby MBDA center than we can easily take technical assistance to our businesses in: writing business marketing plans; conducting feasibility studies; can identify financing condition and take loan or bonding; conducts. Moreover, they also provide financial analysis and prepare the financial projections which can assist us with various certifications for SBE, DBE, CSBE, MBE, WBE, and federal certifications, provides construction services such as estimating, and sub-contracting leads. The Center hosts a free Quarterly Lunch & Learn series to provide training in Export, Government Contracting, Bid Preparation, and Market Positioning & Branding. Hence, this location would be the best plan to grow up our business.
There are several concerns which could be face while registering for the business as listed below:

•	Registering for taxes at the Federal and State level, we may need to apply for a license with the State of Florida because Florida Department of Business and Professional Regulation are only responsible for the licensing and regulation of businesses throughout the State of Florida. There are many listed licensing recommendations which need to follow for registering this business.
•	There could be a concern of finding a right location to start this “TASK CONSULTING GROUP” business.
•	The City of Miami also requires Business Tax Receipt engaging in a business, profession or occupation i.e. need apply for a Business Tax Receipt.
•	The City of Miami requires a Certificate of Use and a Business Tax Receipt to open a business. All Construction Permit work that may be required must be complete and approved before applying for a CU and BTR.

“TASK CONSULTING GROUP”, earn revenues from fees charged to their clients. These could be hourly fees or fees paid as per business requirement. We find the challenges of our clients and effectively manage their time. In a business plan for our consulting firm, the section of marketing strategies is particularly most important for us. We must have strategies in place to continue generate new clients as well as maintain our old clients’. For the first time in Miami city we would follow below steps to achieve our goals of business in this city as follows:

Step 1: Determine the scope service within the city that should match our skills and capabilities with the needs of the potential clients within the city as well as nearby of city. Should have to Identify market needs that are serious requirement to our services and it will must solve a significant problem for our clients. 

Step 2: We will devise points of differentiation i.e. we will be able to articulate by our package of services and different client will get different offer as per their requirement.

Step 3: We create a different business model for our client then finalize the services offering for them and what we will charge for each depends upon the clients’ requirement.

Step 4: For formulating our marketing plan, we already made our website with key strategies' of the plan where we mentioned that if we think of non-competitive professional services then any clients firm could be reach out to mutually refer clients.

Step 5: Prepared a financial forecast which is conservative with according to the type of clients and their projections.
Competitive analysis:
We are describing the competitive landscape with our competitors that use different strengths and weaknesses approach.
Identification of Competition: 
  First element of “TASK CONSULTING GROUP”, must be well conscious of its industry’s competitors as well located in Miami, FL. The organization figure can help  in ideal technique for the organization and having finished understanding about the firm's competitors and figure out the market strategy which wants to help in competitive pricing strategy,  market consolidation plan, Brand tag value and Competitive position. Consultancy marketing approach depend on the product position strategy in present location, it will evaluate all competitor’s income because they may not have position in market. 
The firm's location in the industry:
Present position of the organization settled by the use of an ideal technique and flow model to present marketing management, new product launch plan and Channel Conflict management plan where different organizations uses different techniques according to their present opportunities  and success. However, “TASK CONSULTING GROUP”, has been helping to achieved client’s Goals, missions and Values by using ideal plans.
 
The capability to contend within the industry:
“TASK CONSULTING GROUP”, provides the accountability, sustainability and knowledge in servicing their client. These techniques involve such services to the clients, whose are in trouble with their business need and want to swap their way of work.  
Competitive Market Analysis
     In a crowded market area, competitive intelligence is critical to both operational and strategic decision making. A rigorous and regular approach to competitive position, strengths and weaknesses and direction can help senior executives; identify gaps and opportunities to help analyze different segmentation strategies. The implications and usages for such learning (messaging) can be highly strategic for new markets or segments to determine better position for our offerings in our on-going promotional activity.
   Basically, market and competitive analysis is the collection, analysis and interpretation of real-world data to yield a deep and thorough understanding of the characteristics and dynamics of customers and competitors within a marketplace. The main purpose of this research activity is to help our clients make informed, fact-based decisions regarding potential threats and opportunities by providing insight into the nature of their strategic planning.
   “TASK CONSULTING GROUP” believes that a market and competitive analysis is only effective if it is credible, logical and actionable. To ensure that our analysis has these characteristics has developed a rigorous methodology, the key elements of which are summarized below:
?	Hypothesis Development – A written concise statement that reflects a position, requires research to determine its feasibility, and can be tested.
?	Research Design – The overall strategy that our company and our clients choose to integrate in a coherent and logical way so that the research is effectively addressed and creates a blueprint for collection, measurement, and analysis of data.
?	Data Collection – Employ both quantitative (e.g., phone surveys, mail surveys, database searches) and qualitative (e.g., focus groups, telephone interviews, literature searches) techniques, as appropriate, to collect primary and secondary data
?	Analysis and Interpretation – Evaluate data using a variety of analytical techniques (e.g., regression analysis, conjoint analysis) to test hypotheses, interpret findings and provide recommendations
Market Segmentation Strategy:  
     All competitors can also use these strategies where opportunities can describe clarity-level and more specific relevance for an organization and its offerings only. But 
‘TASK CONSULTING GROUP” have been continuously working with new market strategies, where they handling activities better and leading to greater insights and “clarity” for the organization i.e. how an organization can serve its current and future potential markets. That’s why TASK CONSULTING GROUPS, services are completely different from others where they don’t focus on the analysis for the future expectation of market for the organizations. 
SWOT Analysis:
   “TASK CONSULTING GROUP” has a lot of competition in the current market, but our unique approach to consulting is what sets us apart from our competition. For our firm to be successful we must understand our competitors and our own business very intimately so that we make decisions based on our strengths, weaknesses, opportunities, and threats (SWOT).
   “TASK CONSULTING GROUP”, analysis techniques use planning, market analysis programs, problem solving techniques and developed decision-making processes that span across an assortment of business functions and problem related activities. “TASK CONSULTING GROUP” focuses its expertise on clients’ goals, missions, and values which provide affective solutions.
SWOT analysis cover two type of analysis:
•	Internal Analyses: This includes strengths and weakness of company.
•	External Analyses:   This includes opportunities and threats for company.

           Strengths	           Weaknesses
a)	Provide sustainability and knowledge in servicing the clients for specific knowledge, capabilities, organizational skills development and other qualifications for the success in market.
b)	Provides complete analysis to clients with their lacking points.
c)	Observation of curent issues and complète support till the contract.	a)	Take time in analysis of the complete market where we analyze the data of all the competitors too then start to identify the issues.






       Opportunities	           Threats
a)	Future business to our clients 
b)	Provide benefits and facilities in relation to emerging markets procedure and new technology.
c)	Make demographic, political, environmental and socioeconomic factors where opportunities existed for consultancy business.	a)	All of the areas offering opportunities can also pose threats because consultancy marketing depends on experience and business relationship term. For example, if pending legislation might exist, which passed so increase costs related to obtaining special licensing and certification to operate as a consultant part. This same legislation might also present an opportunity within the field by its potential to increase the perception of professionalism associated with the specific type of Consultancy Company 

References
"About Management Consulting - Institute of Management Consultants USA."About Management Consulting - Institute of Management Consultants USA. Institute of Management Consultants USA, n.d. Web. 22 May 2014.
"Careers in Consulting Facts and Trends." Careers in Consulting Facts and Trends. Careers-in-business, n.d. Web. 22 May 2014.
"Plunkett Research®, Ltd." Consulting-market-research. Plunkett Research, ® Ltd, n.d. Web. 22 May 2014.

Questions – Operations Management

Questions – Operations Management

Chapter 2Pg 70
Exercises questions

2.Using a Web search engine, find file example of corporate vision statements, corporate mission statements, and corporate goals.  Do these examples express concern for the security of corporate information?

3. Search your institution’s published documents, including its Web pages. Locate its mission statement, vision statement, and strategic goals. Identify any references to information security. Also look for any planning documents related to information security.


Chapter 3Pg 115
Exercises question

4. Look for information on incident response on your institution’s Web site. Does your institution have a published plan? Identify the areas in an academic institution’s contingency planning that might differ from those of a for-profit institution. 

human development

human development

This essay should be 1000-1250 words long. You must cover everything listed below in order to obtain a high mark.

Writing and citations should be in APA format.

Note: For all written assignments, only the material assigned in the course should be cited.

A HINT REGARDING WRITTEN ASSIGNMENTS (the following will perhaps save you from having a written assignment returned to you for further work): You will note that most of the written assignments in this course ask you to reflect on your own developmental experience and write an autobiographical analysis of that period in your life.

Design a preschool program for children of one of the following age ranges:

    birth to eighteen months
    eighteen to thirty six months
    ages three to five years


By...

    Tell the age group for which you are designing the preschool.
    Tell what kind of space you would provide, what types of toys or other objects you would use, what types of assistance you would provide, etc. Tie each facet (social, emotional, physical, and intellectual) of your preschool environment to the theories you have studied during this module.
    You must explain some of the different facets of how each relate to Vygotsky's, Piaget's, and/or other theories of development.