all questions are in the file CHM 113

all questions are in the file CHM 113

all questions are in the file CHM 113

Question 1
1.
Very few elements are found in their pure elemental form in nature. Most are
found combined in compounds. In this chapter we will take a closer look at the
nature of covalent (molecular) and ionic bonds, and also consider metallic bonds.

Question 2
1.
Valence electrons are found where in an electron configuration?

Question 3
1.
Lewis structures are a simplified way of showing the valence electrons of an
element. Look at Table 8.1, how many valence electrons does the element
magnesium have?

Question 4
1.
What is the Lewis Dot symbol of Mg?

Question 5
1.
Valence electrons are the electrons involved in chemical bonds. In general, the
number of electrons involved in bonds is described by the octet rule which states:

Question 6
1.
When an ionic compound is formed we depict it as a cation and anion coming
together. But this actually occurs via a _________________ of electrons between
the two.

Question 7
1.
Recall that an ionic solid is an extended network of atoms that we refer to as a
lattice structure. The strength of attraction between ions in this structure is call
the Lattice Energy, which is defined as:

Question 8
1.
The electron configuration for ions reflect the added or lost electron(s). Hint:
invariant ions go to the closest Noble gas configuration.
What is the electron configuration for the fluoride ion, F-?
What is the electron configuration for the magnesium ion, Mg2+?

Question 9
1.

Covalent bonds are found in molecules that are a combination of non-metals. In a
covalent bond the bond is formed by ________________ of electrons between
atoms.

Question 10
1.
The octet rule is generally (but not always) obeyed in the formation of covalent
bonds. We use Lewis Structures to depict the electrons being shared in covalent
bonds. When there are two dots between 2 elements it depicts a single bond,
when there are 4 dots it depicts a

bond and 6 dots depicts a

bond.

Question 11
1.
Not all atoms ‘play fair’ when joined in covalent bonds, some are ‘electron hogs’
and pull the electron density toward themselves. These elements have a high
electronegativity and if they are bound to an element with low electronegativity it
results in a polar bond. Look at Figure 8.7, in the covalent molecule LiF which
atom has high electronegativity?

Question 12
1.
Drawing Lewis Dot Diagrams for covalent molecules starts with finding the total
valence electrons in the molecule. Using Table 8.1 as a guide find the total
valence electrons in: (careful H has only one valence electron)
HCl
NH4+
O2
C2H6

Question 13
1.
Formal charge determination is useful when more than one potential Lewis Dot
structure exists, it will show the most stable form. We will look at this in class.

Question 14
1.
Look at the possible structures for the NO3- molecule at the top of page 310, these
are called resonance structures. Describe the difference between these 3 forms
of the structure:

Question 15
1.
The Octet Rule Broken!!
Some elements don’t behave by the octet rule when they are the central atom.
Reference pages 312 and 313, look at the structures for BF3 and PCl5. How many

valence electrons does B have?
(see a connection?)

Question 16
1.
Bond enthalpy is defined as:

How many valence electrons does P have ?

ACCT640 – Managerial Accounting Fall 2013

ACCT640 – Managerial Accounting Fall 2013


ACCT640 – Managerial Accounting
Fall 2013

Case #3 – Performance Drinks -A further study of:
Regression Analysis
Contribution Margin Reporting
Cost-Volume-Profit Analysis
Differential Analysis
Capital Budgeting


Written by:
Tim Bergsma, CMA, CFE
Assistant Professor – Accounting
Davenport University
Donald W. Maine – College of Business
Email: tbergsma@davenport.edu

?
Background:
	Performance Drinks, LLC is owned by Dave N. Port.  Performance Drinks produces a variety of sports centered drinks.  They began operations in 1993 shortly after Mr. Port graduated with his M.B.A. from Davenport University.  The company saw early success as sports and fitness nutritional products gained new popularity in the 1990’s.  Financially the company is sound and has been wise in controlling their growth over the years.  However, within the last 18 months Mr. Port has noticed a drop in overall company profitability.  This is especially troubling considering that the company has continued to experience top-line growth.  Mr. Port and his management team have been considering developing a new product line.  However, those plans have been put on hold until they can figure out why their profits are shrinking.
	Performance Drinks makes four different kinds of sports drinks.  Those drinks are as follows:
•	Basic
•	Hydration
•	Intensity
•	Post-Workout
Each of these drinks contains a slightly different nutritional profile and is targeted for different users and uses.  The Basic drink has the least nutritional benefit and is targeted for general consumption.  The Hydration product targets endurance athletes and specializes in hydration replacement.  The Intensity product was designed with energy enhancement in mind. It serves the needs of extreme athletes who need long durations of sustained energy.  Lastly, the Post-Workout product is a nutritional replacement product that is generally used following exertion.
Information Related to Case #2 (this section is the same as you received when you were assigned Case #2):	
You are the Controller for Performance Drinks.  You feel as though you have a good handle on the financial reporting and the overall company performance.  However, admittedly, your accounting information system has been designed to serve the needs of external users from an aggregate perspective.  To that end you utilize absorption costing exclusively within the organization.  You recall studying the concept of Activity Based Management (ABM) and Activity Based Costing (ABC) while taking a managerial accounting course.  You wonder if applying those ideas to your business would help to uncover the mystery of the disappearing profits.  
	You recall from your Management Accounting class that product costs are comprised of:
•	Direct Materials
•	Direct Labor
•	Manufacturing Overhead
You don’t suspect that anything strange is going with your direct costs.  You do wonder, however, if a more thorough understanding of your indirect costs may be in order.  Over a series of weeks you talk with a variety of employees, representing a multitude of functional areas, from within the company.  During those conversations you take careful note on what activities might be consuming resources and how those activities might be measured.  You sharpen your pencil and begin to unpack what you’ve learned.  You start with reviewing last month’s Product-Level Profit Report.  That report is following:
 
	Since your primary area of focus is on the indirect costs you compile the following report which further details your overhead charges:
 
Overhead Activities:
Using traditional costing methods, which support your absorption costing system, you base overhead allocation on direct labor cost.  Furthermore, “fringe benefits” are a function of direct labor cost.  
As a result of your many meetings to discuss company overhead you determine that the majority of your indirect costs are related to four primary activities.  Those activities are equipment set-ups, production runs, production management and machine-hour capacity.  “Production Management” refers to a number of items that are correlated to the number of products the company produces.  Ultimately you determine that your key activities have the following usage patterns, as they pertain to the monthly overhead costs:
 
	Upon reviewing budget data from the last budget cycle you discover that the monthly number of set-ups was estimated to be 85.  The number of production runs was estimated to be 250.  That monthly machine-hour capacity is presently at 20,000 machine-hours.  Lastly, Performance Drinks produces a total of four products.  
	After talking with the Plant Manager you create the following usage data relative to products and activities:
 
New Information Pertaining to Case #3:
	The financial reporting to date has been done using absorption costing.  That is to say that the manufacturing costs included direct materials, direct labor, variable manufacturing overhead and fixed manufacturing overhead.  In this sense the Income Statements have historically reported Gross Margin.  Following is a Monthly Income Statement, based on absorption costing, for Performance Drinks:
 
You begin to wonder if there would be any value in repackaging the income statement in a way that would report Contribution Margin as opposed to Gross Margin.  You know that in order to report Contribution Margin you will need to understand your costs as variable and fixed.  Unfortunately the general ledger does not specifically report costs as variable and fixed.  You remember learning that regression analysis can be used to generate data that can be used to create a total cost equation.  With the total cost equation we can understand our total cost as the sum of fixed costs and variable costs.  After doing some research your collect the following data related to overhead and possible causal factors:
 
Requirement #1
Using the data above, which has also been provided electronically in Excel, run the following regression analyses:
•	Linear regression analyzing total overhead cost(Independent - X) and units sold(dependent - Y)
•	Linear regression analyzing total overhead cost (Independent - X) and machine hours used (dependent - Y)
•	Multiple regression analysis analyzing total overhead cost along with both units sold and machine hours used



Requirement #2
	Based on the results from the three regression analyses determine which correlation provides the best estimate of the total cost equation.  Explain why you selected the correlation that you did.  
Requirement #3
	Write out the total cost equation using the results from the multiple regression test.
Requirement #4
	Create a “Contribution” formatted income statement using the results from the multiple regression test.  Your selling price per unit and your direct material cost per unit and your direct labor cost per unit and your fringe benefits all come from the original “Traditional” income statement.  Use the following additional information regarding machine hours, used by each product, to compute variable overhead.  
 
Reference the following sales volumes, by product, for your cost allocation related to units sold.  This data will help you calculate variable overhead.
 
Use the following template as a guide for the format of your “Contribution” Income Statement:
 
Requirement #5
	Compute the following:
•	Break-even point in units
•	Break-even point in sales dollars
•	Targeted profit point in units (use $50,000 as your targeted profit point)
•	Margin of Safety
Requirement #6
	A new customer has surfaced.  That customer has asked you to consider producing a special one-time order for them.  This special order would require a modification to the recipe that will slightly increase the variable cost per unit.  Furthermore, there would be a small fixed cost addition.  The details for the order as follows:
 
Conduct a differential analysis regarding this special order.  Would you accept this order under the conditions provided?  Explain and defend your position.
Requirement #7:
	Your management team has asked you to consider investing in a new piece of equipment.  The details of that investment opportunity are following:
 
The discount rate for this project is 5%.  Compute the following:
•	Net Present Value
•	Internal Rate of Return
Would you recommend investing in this new piece of equipment?  Explain and defend your position.
Clarification on format and data:
	Clear communication and professionalism are important.  Defending your answer with data is important.  
•	An electronic copy of this Case (this document) is available within Blackboard.  Additionally, an Excel file, containing the necessary data for the case will be available within Blackboard.
•	Create one professional report, in Word, that contains all of answers.  In that report you should clearly label all of your answers.  Make your answers easy to read and find.  Imagine you were giving this report to your boss.  Further imagine you have to lead your boss and the executive team through your findings.  You will then have one Word document as your final product. You will also have one Excel file.
•	Grading is based on both accuracy (see rubric) and your ability to communicate your answers professionally and clearly.
•	Use the following naming structure for your files: last name_first initial_case3.docx.  Of course your Excel file will have an .xls suffix.  
•	Double space your report.
•	Put good thought into how you organize your Excel document. Part of your grade will be based upon the usability and layout of your Excel file. Imagine that have to give the electronic copy of your Excel file to your boss, or a peer, to work with.  Imagine that you could not coach them at all on how to use your file.  Is your file organized and labeled so clearly that anyone could use it, easily, without instructions from you?  You want to strive for that kind of clarity in your work.
•	Your report should have a title page. Use APA 6th edition for guidance on title pages.
•	You will physically hand-in your report. You will also upload to Blackboard both your Word document and your Excel file.
•	Due date: Tuesday, October 22nd at 6:00 PM EDT
•	Late submissions will result in the following:  10% reduction in score for each 24 hour period of being late (up to 3 days).  After 3 days late zero credit will be earned.
•	As always please come to me with learning questions. This project is a learning experience.  
Rubric:
This project is worth 25% (250 points) of your overall course grade. I will convert your scores to a 250 point scale.
 

Number of lipid molecules we added to each cell to make the tethered membrane.

Number of lipid molecules we added to each cell to make the tethered membrane.

There are three questions that I would like to ask, all related to one another:

1) Calculate the number of lipid molecules we added to each cell to make the tethered membrane.
Molarity of lipid = 3mM
Volume added = 8?L

2) Calculate the number of molecules of lipid in the tethered monolayer film on gold.
Area per tethered molecule = 1nm2
Area of gold electrode = 2mm2

3)What is the fraction of added phospholipid that is incorporated into the membrane?

Write a 3 to 4 page paper on soil degradation in the…

Write a 3 to 4 page paper on soil degradation in the…

Write a 3 to 4 page paper on soil degradation in the United States. Key points need to be addressed. 
What is soil degradation?
Are we as a country doing anything about it?
What are some of the things we are doing?
What does the future look like with the things we are doing to stop the degradation? 
Please use the attached references for the paper. If the resources are used please correct in-text-citations. Please no direct quotes!
Attachment Preview:
Resources for Hope for Soil.docx  Download Attachment

This is an unformatted preview. Please download the attached document for the original format.
Resources
Eswaran, H., Lal, R., & REICH, P. (2001). Land degradation: An overview. Retrieved from
http://www.nrcs.usda.gov/wps/portal/nrcs/detail/soils/use/?cid=nrcs142p2_054028
Cox, C., Hug, A., & Bruzelius, N. (2011, April). Environmental working group: Losing ground.
Retrieved from http://www.ewg.org/losingground/report/erosions-long-destructive-train.html
Schless-Meier, A. (2014). The soil will save us: A manifesto for restoring our relationship with
the land. Retrieved from http://civileats.com/2014/06/05/the-soil-will-save-us-a-manifesto-forrestoring-our-relationship-with-the-land/
U.s. forest service announces final rule on restoration of soil and water resources. (2013,
September 12). Retrieved from http://www.usda.gov/wps/portal/usda/usdahome?
contentid=2013/09/0176.xml
Grace communications foundations: Soil quality. (2014). Retrieved from
http://www.sustainabletable.org/207/soil-quality
Al-Kaisi, M. (2014, February 19). What is soil health and how can we improve it?. Retrieved
from http://www.extension.iastate.edu/CropNews/2014/0219al-kaisi.htm

Hide preview 


Additional Requirements 
Min Pages: 3 
Max Pages: 4 
Level of Detail: Show all work

KAPLAN AB209 UNIT 3 AND 4 DISCUSSIONS

KAPLAN AB209 UNIT 3 AND 4 DISCUSSIONS

Unit 3: Unit 3: Talent Selection and Retention - Discussion
Topics
Discussion: The Hiring Process
Discussion: The Hiring Process

This Discussion provides you with an opportunity to apply and discuss the employment process concepts presented in your Reading and Learning Activity.

You practiced with the hiring process concepts in the Learning Activity this week. Learning how to apply this process should better prepare you for your current or future management position. Most managers must participate in or are responsible for the hiring process at some point in their jobs. If you run a small business you may have to do all the hiring yourself, at least initially.

Read the scenario below and then respond to the Discussion topics.

Scenario:

GlobalTrek is an adventure clothing and supply company. They specialize in first time – moderate experienced adventure travelers. They carry travelling clothes that are meant to take a beating, as well as gear such as rehydration salts, climbing ropes and carbines, backpacks with emergency GPS devices, and the like. They also have various global treks going on throughout the world that are guided lasting anywhere from 7–30 days. They now have 65 employees and are projected to pass 100 employees within the next 2 years.

Their employees are young but experienced outdoors personnel. They outsource any inventions they create in terms of gear to two companies in Asia. They then sell assorted existing gear from other companies as well. Usually they have had no problems hiring people through referrals and social networking. But lately they have had some concerns that some of the potential employees may pose a security risk and expose them to additional liability. They also need to hire additional coordinating and administrative personnel. Their clients are typically in their 40s, 50s, and 60s. But one of their faster growing segments is young families.

    What should the titles of the jobs be and what should the job specifications include for each type of position?
    How should they advertise these positions? Justify your choices.
















Unit 4: Unit 4: Small Business Operations - Discussion
Throughout this course, many Discussion opportunities come up where you need to respond to other people's opinions and comments. Respond to your Discussion topic after you have completed your Reading.
Topics
Product Attributes
Product Attributes

Besides an introduction to operations in your Reading, you read about different product attributes and examined these concepts in your Learning Activity. Now you will apply what you practiced to a technology company of your choice.

Visit the website of a technology company (select one that has not been taken by another student) and take note of anything you can regarding brand names, package designs, labels, and warranties. Choose good and bad examples of each of the product components. Identify the website and highlight your findings regarding at least two products.

Then post your findings to the Discussion.

1.What does the term “Born-Global Firm”…

1.What does the term “Born-Global Firm”…

1.What does the term "Born-Global Firm" mean or represent? Are these companies unique or common place in the international market? Provide an example of a company that you would consider to be a born-global firm, and why?
•	
2.What are the difficulties that MNC’s encounter when attempting to pursue joint ventures in countries like Russia. Do a little research to determine whether in recent years the Russian government has passed legislation removing obstacles or whether there is little to no progress being made in this respect. Share with your classmates your thoughts and findings in connection with the questions.

Additional Requirements 
Min Pages: 1 
Level of Detail: Only answer needed 
Other Requirements: Each question is a discussion, just need a paragraph for each question.

You are working in a research lab on a genetic condition in humans that results in a patient’s inability to digest the common sugar fructose.

You are working in a research lab on a genetic condition in humans that results in a patient’s inability to digest the common sugar fructose.

2. You are working in a research lab on a genetic condition in humans that results in a patient’s inability to digest the common sugar fructose. Your lab has observed that this condition is equally frequent in males and females. In most cases, neither parent of an affected child has symptoms of this disease. The disease is very rare, so you have a limited amount of data for analysis.
a. Describe the most probable pattern of inheritance for this condition. Fully explain your reasoning.
b. Suppose that you can use laboratory mice as a model organism to research this disease. Outline sample genetic cross(es) that could be used to verify your proposed pattern of inheritance. Explain expected results.
c. Explain how mutation could result in the inability of a person to digest fructose.
d. Design a simple molecular genetics experiment or test that could be used to determine whether a mutant allele is present in a given individual. Discuss the expected results for a healthy person vs. an affected person.

Alcohols have higher boiling points than analogous…

Alcohols have higher boiling points than analogous…

Alcohols have higher boiling points than analogous ethers and hydrocarbons because
A) the oxygen atoms in alcohols have shorter bond lengths. 
B) hydrogen bonding is present in alcohols. 
C) alcohols are more acidic than the analogous ethers or hydrocarbons. 
D) alcohols make you intoxicated. 
E) All of the above 

Additional Requirements 
Other Requirements: please hurry!!

learning

learning

What is learning? Give an example. Indicate in your example the major elements that demonstrate it is an example of learning.

Answer must be a minimum of 200 words.
Please list references