Select a system topic you are going to use throughout this course. In a paper, analyze your chosen system with the help of the systems theory in the following ways: •Why is your topic considered a system?

Select a system topic you are going to use throughout this course. In a paper, analyze your chosen system with the help of the systems theory in the following ways: •Why is your topic considered a system?

I have to work with you on this assignment. The topic chosen would be used throughout the assignment. Please you can decide on the topic that's not too complicated. Attached is the similar topic I came out with.

Select a system topic you are going to use throughout this course. In a paper, analyze your chosen system with the help of the systems theory in the following ways:
•Why is your topic considered a system? Analyze the system’s components.
•How did the system develop?
•Analyze problems historically found with this type of system.
•Determine foreseeable problems with the system as it develops or matures.
•Can it be improved?

For example, using the Titanic as a system topic, state the subsystems, then you might ask yourself what was wrong with the design and construction system for the ship. Is designing a ship around the myth of it being unsinkable the beginning of a systems’ problem? If you were building this ship today, how would you have changed the design system to ask the right design questions and help to mitigate the sinking of the ship?

Support your paper with a minimum of five (5) scholarly resources. In addition to these specified resources, other appropriate scholarly resources, including older articles, may be included.

Length: 5-7 pages not including title and reference pages

Your paper should demonstrate thoughtful consideration of the ideas and concepts that are presented in the course and provide new thoughts and insights relating directly to this topic. Your response should reflect scholarly writing and current APA standards. Be sure to adhere to Northcentral University's Academic Integrity Policy.

The credit card processing system is confusing. The players are numerous and the process is complex. To understand how it all works, it helps to grasp the types of companies that are involved, and how much money they typically charge for processing a transaction.
David Schwartz is director of marketing at a leading payment gateway, Authorize.Net. He says, “This is by far the most complex industry I have ever been associated with. I always tell new employees to give themselves six to nine months to become comfortable with the lingo and to understand how the payment processing system works.” Diagrams of the process can also help. Schwartz continues, “We added a detailed ‘how it works’ diagram to our new corporate website in March 2005. It has since become one of the most visited pages, proving that people want to better understand how a payment is processed.”
To understand the payment process, Schwartz suggests a working knowledge of the participants and the services they provide along the way. He also suggests tracking a hypothetical transaction through the entire payment processing system. In that way, Schwartz says, ecommerce operators can understand not only what services these participating firms provide, but also what fees they charge for processing a transaction.
The Participants
For a typical ecommerce credit card transaction, a number of participants play key roles in the process. Those players include: 
•	the customer,
•	the merchant,
•	the payment gateway,
•	the acquiring bank’s processor,
•	the credit card interchange,
•	the customer’s credit card issuer, and
•	the merchant’s acquiring bank.
Seven participants, in other words, normally interact with each credit card transaction. Notes Schwartz, “With all of these companies involved in the process, it takes, amazingly, just 2- 3 seconds on average for a transaction to be approved.”
Follow the Money
Let’s say you are a $100 credit card purchase. The moment the customer hits the buy button on the ecommerce merchant’s website, you are zooming across cyberspace on a multi-stop journey, during which you will shed, typically, nearly three dollars as companies that you interact with assess varying fees for their service. (Actual fees vary based upon a number of variables, including merchant type, card type and risk factors.)
Your first destination is the payment gateway (-.10¢), which routes you to the appropriate processor (-.08¢). The processor immediately submits you to what is known as the credit card interchange (-.09¢). After you’ve cleared the interchange, your next leg takes you to the issuing bank (-1.93¢), which verifies the available funds in the customer’s credit card account. Whether you are approved or declined, you now begin the journey back to the customer. However, if you’re approved, you and your authorization results are soon to part after speeding by each stop you made on the way. Your detour is through your merchant account at the acquiring bank (-.65¢) to, ultimately, the merchant’s bank account, where you will be deposited; that is, the $97.15 of you that remains.
A credit card merchant account opens new payment opportunities for your business . The U.S. Census Bureau estimates that an approximate 181 million people carry credit cards as of 2010, so accepting them could bring in additional sales revenue. If you plan to get a credit card merchant account, you should learn how a credit card processes when you accept one from a customer.

Read more : http://www.ehow.com/info_7956117_credit-card-process.html
Credit Card Merchant Account
•	A business owner  must have a credit card merchant account to accept credit cards. The process of applying for a merchant account is similar to applying for a business credit card. The account provider asks for the business owner’s tax identification number to check his credit as well as information about the business. To maintain a merchant account, the business owner must pay transaction fees associated with each sale.
Merchant Services Provider
•	The merchant services provider is either a standard bank or a third-party company that has contracted with one of the credit card networks (such as Visa, MasterCard and Discover) to offer services to merchants. When the merchant swipes the customer’s card, the information — including card number, expiration date, CVV (card verification code) and name — goes to the merchant service provider’s system for evaluation.


Read more : http://www.ehow.com/info_7956117_credit-card-process.html
1.	Credit Card Merchant Account
o	A business owner  must have a credit card merchant account to accept credit cards. The process of applying for a merchant account is similar to applying for a business credit card. The account provider asks for the business owner’s tax identification number to check his credit as well as information about the business. To maintain a merchant account, the business owner must pay transaction fees associated with each sale.
Merchant Services Provider
o	The merchant services provider is either a standard bank or a third-party company that has contracted with one of the credit card networks (such as Visa, MasterCard and Discover) to offer services to merchants. When the merchant swipes the customer’s card, the information — including card number, expiration date, CVV (card verification code) and name — goes to the merchant service provider’s system for evaluation.
o	Sponsored Links
?	Card Payment Processing 
Processing case studies. Read & watch client stories online here.
www.visa.com/Card-Processing 
Credit Card Network
o	After the credit card provider receives information about the electronic transaction, it sends the information to the credit card network. The credit card company then checks the customer’s account to see if funds are available before reporting this information to the merchant with an approval. The merchant can then feel comfortable providing his products or services to the customer and the terminal produces a receipt. The process takes a matter of seconds.
Batch Processing
o	After the approval, the merchant submits all charges for the day to the card network through the merchant services provider for what is called batch processing. The provider communicates with the customer’s bank to debit the customer’s account to retrieve the funds. Days later, the merchant receives a deposit  for the sale to his bank account from the merchant services account provider.


Read more : http://www.ehow.com/info_7956117_credit-card-process.html
How Credit Card Processing Works
The credit card transaction can seem like a confusing process, especially when you take into account all of the participants that play key roles in transmitting and authorizing funds. Yet understanding how credit card processing works can provide better insight as to what goes on behind the scenes once the credit card is swiped, and the purpose of each participant throughout the process. In the few seconds it takes for a transaction to go through, whether during a face-to-face or online sale, the credit card payment makes quite the journey.
1.	The process starts with the customer and the merchant. 
2.	The customer makes a credit card payment, which is sent to the payment gateway or terminal via the Internet or a phone line. 
3.	The payment gateway/terminal routes the payment to the merchant bank’s processor. 
4.	The processor submits the payment to the credit card network, and once cleared, the payment makes its way to the customer’s credit card issuing bank. 
5.	The authorization request to the issuing bank includes the credit card number, the card’s expiration date, the billing address for AVS (Address Verification System) validation, the CVV number and the payment amount.
6.	The issuing bank validates the card number, checks the amount of funds available, checks to make sure the billing address provided matches the one on file, and validates the CVV number. Depending on available funds in the customer’s account and whether the billing address and CVV are correct, the payment is either approved or declined. 
7.	If approved, the authorization goes back through the credit card network, the processor and the payment gateway to the merchant and the customer. 
8.	The payment continues to the merchant’s bank account, completing the transaction.   
What Makes BluePay Different?
The credit card transaction process is the same for all acquirers. What makes BluePay different is our technology and our ability to consolidate vendors. In the steps above, BluePay is the payment gateway and the processor. That means instead of using a third-party gateway to route the payments, we can provide our own fast, secure payment gateway in addition to our wide range of credit card processing products. Rather than have to contact a different company with gateway questions or concerns, our merchants have just one company to call and one billing statement to receive.
How to Evaluate Credit Card Processing Companies for Small Businesses
Posted on February 27, 2013 | 1:49 PM
How do you know which credit card processing company is best for your business?
For small businesses, this is an important decision that can have a substantial effect on your success. When choosing the most suitable merchant services company, you should consider the following:
Learn what processors offer - Small businesses need to learn what the credit card processing companies have to offer to see if they can fit their needs. Be aware of the major credit cards, debit card networks and various payments that are accepted. What types of payment does the service support and what other services are offered such as check processing or prepaid card services?
In addition to the payment options, make sure you select a merchant services provider that offers adequate support. It is important to select a processor that offers 24/7 customer service and technical support. Other things to look for are live chat support and support by email if you prefer those methods of communication. You also want to choose a company that will support you if you have a chargeback or fraud issue.
Determine the total costs - Costs vary by different processors, so small businesses should be aware of the various charges for payment processing solutions. Consider application fees, monthly minimums, monthly statement fees and any other additional fees. How much do they charge per month/ per transaction? What is the transaction fee?
Also be aware of the initial cost of equipment and the set-up fee. Some processors may charge less for equipment, but increase set up fees. One processor may charge hundreds of dollars more than another company for an identical piece of equipment. Don’t just pick the least expensive one. Find out the prices and compare it to the other companies out there so you can be sure to get the best value.
 For instance, if you are already accepting credit cards, First Merchant Services will match or beat your existing processing rates. If this is your first time processing credit cards, you can rest assured you will receive the best processing rates available along with a free POS system. We also offer free processing equipment including credit card terminals, cash registers and touch-screen POS systems.
Read the fine print - Make sure you carefully read the contracts and application forms presented to you. Certain details may be left out when evaluating a processor, but can show up in the contract. Some processors may hide their fees or fail to mention them. Be aware of termination and cancellation conditions, including any penalties that may occur. This will help you avoid problems or unresolved questions, as well as prevent any surprises.
By completing these actions, you will effectively be able to evaluate credit card processors and determine the appropriate service for your company.
- See more at: http://firstmerchantservices.com/blog/2013/02/how-to-evaluate-credit-card-processing-companies-for-small-businesses/#sthash.TBI1pANs.dpuf

OPS MGMT Ch 12 Mini Case – Farquhar Industries, Inc.

OPS MGMT Ch 12 Mini Case – Farquhar Industries, Inc.

Farquhar Industries, Inc.
Farquhar Industries, Inc., is a medium-size producer of custom metal products. The company recently got a contract to make the chassis for a well-known microcomputer. This part will be produced using dedicated, highly automated equipment. But the company frequently gets contracts to make special orders of custom products. These are usually produced on general- purpose equipment and involve a high degree of skilled labor. For medium-range planning purposes, the company divides its products according to the type of process required-job shop or line flow. Further, demand requirements for the job shop are stated in terms of hours because of the large number of different products produced, each requiring various amounts of processing time. On the other hand, the line-flow product demand is stated in teams of units because the production rate is relatively constant for these items. The forecasted demand in each area for the coming year is shown below.

Month Manual Operation Demand Forecast (Hours) Automatic Operation Demand Forecast (Units)
January
February
March
April
May
June
July
August
September
October
November
December 1,800
1,500
1,900
1,600
2,000
2,200
2,000
1,800
1,700
1,800
2,000
1,500 6,000
4,000
5,000
6,000
5,000
6,000
7,000
6,000
5,000
6,000
8,000
6,000

Normally, both operations work eight hours per day, five days per week. The automatic operation produces at an average rate of forty units per hour. Any time that the process is operating, five employees who earn $12.50 per hour must be present. Work on products requiring manual operations is a little different. Each employee there earns an average of $16.00 per hour, and there are currently ten employees. Extra employees can be hired in that area, but the cost of advertising, interviewing, and so on is about $500 per employee hired. Any employees laid off receive one month's pay as compensation. Overtime work is paid at a 50 percent premium and is limited to two hours per day on weekdays and four hours on Saturday.
Bill Dixon is production manager for Farquhar. He is working on developing an aggregate plan for the coming year and has two major concerns. First, the company's relations with its employees have been good, but there is some talk of unionizing. Too many layoffs could lead to more than talk. Second, the cost of carrying inventory has been increasing. Custom-made products are not inventoried, but high-volume products are inventoried at an average cost of $1.50 per unit per month. Carrying cost is a major concern with 2,000 units now in stock.
Suppose you are Bill Dixon. Develop an aggregate plan that meets Farquhar's company objectives, and determine the total costs associated with that plan.

Dissertation on The Impact of Brands on Consumer Purchase Intention- an analysis of Burberrys

Dissertation on The Impact of Brands on Consumer Purchase Intention- an analysis of Burberrys

Research Proposal

Word Limit: 5,000 (-/+10%)
	

First Marker Comments

Introduction (20%)

1) Title

Initially this might be regarded as a working title, and ideally should mirror closely the content of the document.

2) Background

This informs the reader of the problem or the situation, and the context you are interested in.

3) Rationale for the study

· What is the research issue?

· Why is it an issue?

· Why is it an issue now?

· What could this research shed light on?

4) Research Aims

Objectives, Research Questions and Hypothesis.

	

The title of the research has been clearly mentioned before the introduction. The selected topic reflects the nature of the study.

The research problem has been clearly explained. The interested area of the researcher has been adequately emphasised.

The candidate has not specifically provided a rationale for the selected study. However, the significance of the study has been briefly discussed.

Research objectives and research questions have been identified and clearly stated. However, hypothesis have not been identified.

2nd Marker: 45% = 9

Literature Review and Conceptual Framework (30%)

This section will demonstrate the student’s knowledge of the literature and make a critical link with the situation to be investigated.

Students are expected to critically review 5 or 6 sources to underpin the study.

This critical activity should produce a conceptual framework.
	

The candidate has provided literature review on some of the few important areas related to the study. However, adequate literatures on consumer purchase intention have not been provided. Previous studies, theories and concepts on branding have been explained.

However, the candidate has not attempted to critically evaluate the previous theories and studies.

The conceptual framework has not been developed.

2nd Marker: 40% = 12

Research Design and Methodology: (40%)

This section gives a detailed rationale of howyou intend to achieve your research objectives. You are expected to:

1) Explaining your selection of research paradigm.

2) How will access to data be gained and secured.

3) Outlining the methods of data capture, analysis and interpretation to be used, and give reasons for the choice.

4) Highlight any limitations in the chosen approach methodology.

5) Discuss the type of ethical issues relevant for the proposed research.

6) Discuss about the resources that are required to complete the proposed research.
	

The candidate has provided explanations for the selection of research paradigm.

The data assessment and analysis methods and tools of the study have been briefly described.

Limitations of the study have been very briefly discussed.

Furthermore, the candidate has discussed on ethical considerations related to the study.

However, resource requirements of the research have not been specifically described.

2nd Marker: 60 = 24

TRUE/FALSE (CHAPTER 15)

TRUE/FALSE (CHAPTER 15)

TRUE/FALSE (CHAPTER 15)

1. Zero-base budgeting requires the periodic review of all programs, not just new ones.

2. It is difficult for accountants to have a role beyond auditing the financial statements of governments and not-for-profits.

3. “Outputs” is a term used to indicate the quantity or units of service provided by an activity.

4. One of the principal disadvantages of zero-base budgeting is that it requires budgetary units to provide information that may never be used in the decision process.

5. Many of the benefits of program budgeting may be ascribed to the organizational self-examination that it requires at the outset.

6. Most accounting organizations support the notion that performance measures should be included in general-purpose annual financial reports.

7. The Government Performance and Results Act of 1993 requires federal agencies to focus on explicit near-term objectives and performance measures.

8. The GASB’s SEA reporting proposals focus on measures of efforts, measures of accomplishments, and measures that relate efforts to accomplishments.

9. Rather than cash inflows, the potential benefits of many capital assets can be expressed as cash savings to governments and not-for-profits.

10. It is widely accepted that capital assets should be financed with resources on hand to achieve interperiod equity.

11. Program outcomes frequently are more difficult to measure than inputs and outputs.

12. An important part of capital budgeting is to compare alternative means of achieving the same objective.

13. Benefit-cost analysis has fallen from favor among management experts because it usurps the role of informed judgment.

14. A disadvantage of evaluating capital expenditures separately from operating expenditures is that it is easy to overlook operating costs associated with newly acquired assets.

15. An organization’s mission and goals derive from its operational objectives.	

Data Interpretation

Data Interpretation

Data Interpretation

Select a pair of articles on an identical topic from your Annotated Bibliography. This pair can be comprised of (a) one article to represent a research approach and another to represent another approach (e.g., one quantitative and one qualitative) or (b) one scholarly, research-based study and one practitioner article. Note: If you do not have two suitable articles in your Annotated Bibliography, you may find two suitable articles on a similar topic from the Walden Library.

Analyze the articles and compare them in terms of the following questions:
·
·What comprises the data presented in each article?
·
·How are the data presented and interpreted?
·
·Are the data summarized only, or does the article include appendices or tables that present the data for the reader's own interpretation?
·
·Are there other ways that the data could be interpreted?
·
·Are there other variables or factors that appear to have been excluded from consideration?
·
·Is the argumentation sound and convincing?
·
·Does each article include limitations of the study or approach?
·
·Does each put the findings into a larger context in terms of current and future research?
·
·Are the implications of the article presented in terms of research, practice, or both?

trade protectionism

trade protectionism

Your boss has asked you to assist him after normal work hours with shredding some documents. The division vice president announced a federal level investigation in last week’s “All-call; All-attend” staff meeting. You need your job and you want to help your boss. But you’re just not sure in this particular situation. What is the ethical problem in this situation? What steps should you take? When should you take them? Who should you talk to about this? Why?

Describe and explain the various forces that affect in international markets. What are the advantages and disadvantages of trade protectionism? 

biases

biases

Just have to answer this discussion question. 
Additional Requirements 

Min Pages: 2 
Level of Detail: Show all work 
Other Requirements: I have to do a discussion: 

Tell me about "bias" ... what is it, what kind of "biases" are there ... where do they come from ... how do they infiltrate our thoughts and actions ... what if any role do they play in our own sense of "personal ethics" and "values?" include examples, of "availability bias". 

It has to be the APA 6th format has been adopted by the School of Business as the appropriate format for submissions and must comply with this standard. I can not use Wikipedia or wiki of dictionary websites. 

Assessment #1 – Motivation Essay (Graded) Case Study You have recently joined a chain of 5

Assessment #1 – Motivation Essay (Graded) Case Study You have recently joined a chain of 5

Assessment #1 - Motivation Essay (Graded) Case Study You have recently joined a chain of 5

Assessment #1 - Motivation Essay (Graded)

Case Study
You have recently joined a chain of 5 pharmacies in suburban Adelaide, run by an owner who delegates management, in each, to the pharmacist-in-charge. Your first work experience for the chain is running a small pharmacy with just you and 3 pharmacy assistants:Amy is in her early twenties, and has been at that pharmacy for 4 months. It is her fifth job, having worked as a sales assistant in boutique clothing stores, and behind the bar in pubs. She enjoys setting up displays for catalogue promotions, and chatting with customers on the shop floor, but seems bored with the routine of assisting with the dispensary of scripts and managing stock. Her knowledge of pharmacy products seems quite limited, as she often asks the other assistants. Since the stores are open 7 days a week there needs to be some flexibility regarding availability, but Amy always has reasons to not work on Saturday and Sunday mornings. You also note she tends to chew gum while at work, and keeps going outside to have a smoke. Her uniform seems to often be unironed.In the time you have been there you note that she seems to have become bored and that she does not seem motivated to do anything much anymore. Her greatest joys are answering private phone calls on her smart-phone and going on Facebook in any spare time. You wonder why she was employed by the owner in the first place, only to be told that she is related to the owner’s partner and he might have had “some pressure “ put on him to employ her. However, you believe that she definitely has some strengths.
Bethis a few years older than Amy, and has worked in that pharmacy for 6 months. She has worked in 3 of the other pharmacies in the chain over the last 4 years, but has moved to this one since her rental home is only a few streets away. She and her partner both work, saving to buy a house. Beth is much more conscientious than Amy, but has low self-esteem and therefore lets Amy manipulate her into doing tasks that Amy does not like doing. Her performance is dropping over the time you have been there, but you believe she is a valuable asset with product knowledge, her caring nature and her high need for affiliation.
Carly is younger than Amy, but is only part-time whereas the others are full-time. She is just working for the money currently, as she is contemplating whether to enrol at university in 2014, or whether to go travelling. Currently she is living with her parents. Of the three you gather that Carly is the smartest, since she is quick to learn anything to do with the pharmacy and is coming up with creative suggestions. She is annoyed with Amy’s behaviour and often will not talk to her if she can avoid it.
Questions

1.Explain in terms of the Adams Equity model, including the equations, why Beth’s performance is dropping and how it could be used to motivate her.

2. Use the Vroom expectancy model to outline a plan to motivate Amy.

CHECKLIST ASSIGNMENT 1

Before you start

· Read through the theories and understand how to actually use them to motivate someone.

· Plan your assignment in terms of structure.

· Collect references such as books and/or journal articles.

· Write out a rough draft.

Writing the essay

· Use Headings.

· Type double-spaced.

· Be clear in your explanations.

· Make sure the literature is integrated.

· Reference your material. If you do not, you will be penalised for plagiarism.

· Use theHarvardstyle of referencing:author(year).

· Include a reference list at the end.

Afterwards

· Check grammar and spelling using computer’s spell-check

· Have someone else read through it to make sure that it makes sense.

· If you have referred to an Appendix make sure it is attached.

· Check that your reference list is in alphabetical order of author.

· Make sure you have included the “Plagiarism statement” and have signed it, if you have not plagiarised.

· Keep a copy of the report.

General referencing information

· Initials of authors not used in body of essay when sourcing.

· If only 2 authors, then “et al” not used.

· Adams is spelt this way and his theory:Adams’ theory.

· Do not abbreviate in a formal assignment. For example, say “is not” and not “isn’t”.

· Be consistent in the reference list: author’s family name and initials.

· Any table, graph or source listed in an Appendix should give the full reference details of the source as would appear in the reference list.

· Any time you introduce a concept which is not “common knowledge” then you need to identify the source.If this is NOT done, it constitutes plagiarism.

Explanation of grade sheet criteria

Clear explanations
Does the student show that they can discuss applications of the theories and the situations clearly?
Or are they vague or general, implying they do not have an adequate working knowledge of the theories?
Application of theory
Is the theory actually being applied to the situation or is there a tendency just to take chunks out of a textbook and then not actually apply the theory? Are aids used to help in explanation, such as exchange relationship diagrams if applying Adams or the equation if applying Vroom? Are examples relevant?
Research / literature support
How much is the literature and research used to support statements made? If a particular theory is being promoted, has any research been introduced which supports the student’s desire to use it in a particular situation?
Realistic options
Are the options suggested realistic--that is, are they practical from a real-world point of view?
Number of references
Are there fewer than three or many more; that is, is the essay ‘rich’ with relevant references? Has the Harvard system of referencing been used?
Reference list
Has the reference list been correctly used? Are only authors acknowledged in the body of the assignment listed in the reference list? Has the student gone beyond text books and lecture notes and used journals, and other sources?

Format - spelling/grammar/presentation
Has the student checked spelling and grammar?
Is the presentation well spread out with adequate, double-spacing and “easy-to-read” type?
NOTES ABOUT ASSIGNMENT 1

· Do not spend much time actually explaining the theories—this is not required.

· Give clear explanations. If appropriate, supplement with diagrams and formulae. These can be produced as appendices, but be sure to refer to them within the text of your assignment.

· This is to be an individual assignment. You may, for example, discuss the case with others in the class, but you must produce an individual assignment which is your own work. Not to do so is plagiarism which attracts heavy penalties.

· Include reference to research about the theories you have used, in terms of their applicability to situations as existing in the case study or real work place; that is, does research suggest they would actually work in this situation?

· Keep a copy of your assignment.

· It must be double-spaced for ease of reading and marking.

· Evidence of plagiarism will cause a penalty of scoring zero.

HINTS FOR WRITING ASSIGNMENT 1

· Spend about 750 words for each of the 2 questions.

· Word lengths of 1500 words mean + or – about 500 words. However, you would likely not have enough material covered in 1000 words. Assignments with over 2000 words would likely not have those words above 2000 marked. (Note: other staff may request you include a word count.) The reference list is not counted in the word count.

· If you have a lot of information you can include it in the Appendix. This is looked at but not marked so do not put your most important points in it.

· My preference for this assignment is to not spend space on an Introduction and Conclusion. Other markers would differ from me so for other courses check preferences.

· It is probably easiest to just write an answer for each question rather than trying to combine them.

· A recommendation is that the first paragraph for each question briefly introduces the theory. Since this is not your own work, even if you paraphrase it, you should check that you have acknowledged the source for each line. Most students who get cited for plagiarism do so in this section of the assignment. Do not spend too much space on this as the markers are looking for understanding of application of the theories. Copying large amounts from a text-books or the web do not show that the concepts are understood in application. Often the students scoring the lowest for this type of assignment in the past have included many pages copied from different sources but just a few lines in attempting to apply the theories, which is what we as markers are more interested in.

· Note that referencing and acknowledgement of sources is an important part of university education. If you have queries after looking at the UniSA website on referencing, please ask your tutor.

· Remember that to just pass in the first case, we will be looking to see if the theories are understood and applied correctly.

· The first thing a marker looks at is the reference list. If you have only 3 references it implies the most you are aiming for is a P2 or P1. Also if it is not set out properly it implies lack of care. (Remember the concept of the “halo effect”.)However, many references also does not guarantee a higher grade if the theories are not understood, but it does suggest that grades above a P1/ P2 are being aimed at.

· Try to not be too descriptive—attempt to be more analytical.

· Avoid just repeating masses of the case study

General points

    Check the reference list---are there 3 sources minimum. If fewer than 3 you cannot pass. Wikipedia and non academic sources do not count.
    Is the reference list set out correctly?
    Have you acknowledged a source of reference when you refer to a concept? If not, that is plagiarism.
    If the English is so bad we cannot understand it, then we cannot mark it and it would not pass.
    To get a grade above a P1 (65% OR ABOVE) it would need to ‘STAND OUT”. Usually, credit and above assignments are well-written, show a strong grasp of the concepts, can explain them well, and have gone beyond the minimum 3 references.

GENERAL MARKERS’ COMMENTS from previous SIMILAR assignments which you may find helpful:

    For most there was potential to have scored at least a grade higher –even 2 grades higher-with a bit more care
    There is a concern coming up to the exam that those who scored an F1 or F2 will have major problems coping with it since it is a closed book situation , and there is obviously difficulty in understanding the concepts when it is even done with an open book as it was for the assignment.
    It seemed that quite a few were aiming for a bare pass, but there is always a danger if that is the highest score you are aiming for. I guess I am biased but I was hoping for a larger proportion aiming for an above average grade.

OVERALL STRENGTHS OF THE HIGH SCORING ASSIGNMENTS

    The number of references indicated level of research. The average for my assignments was 6, with a range from 3 to 12. (Note, however, that the number of references did not guarantee a pass since the markers were all looking for understanding of application of the theories and the ability to explain clearly as the most important issue.)
    The general setting out was quite good and enhanced by appendices in some cases
    Some showed a high level of thought
    Many good points were made in some sections
    Was pleased with those few that I marked who did Q2 well in going thru the steps I outlined and clearly explained their reasons for each of the concepts.
    Some have good, confident writing styles

OVERALL WEAKNESSES OF LOW SCORING ASSIGNMENTS

    Vague comments
    Balance issues—too much on explaining the theories and little on application (this was the difficult part and worth more)
    Too much just repeating the case study
    Descriptive rather than analytical
    Inconsistency in responses. Some did very good responses to one question but then let themselves down with responses to the other.
    Sourcing—still a few problems with this
    Some have not thought about the setting out of the reference lists. I was quite disappointed in this particularly after I had emphasized the importance of this and the halo effect caused by markers starting with looking at the Reference list before marking the assignment.
    In Q.1 problems understanding and applying the relevant other concept.
    Q.2 (expectancy theory) was often not set out as I had suggested in the lectures. Many did not identify what the motivational force was for. Quite a few confused the concept of expectancy with effort. Remember that the theory is used to determine choice of behaviour amongst a range of options—the option with the highest MF is the one which will be pursued.
    A few that failed seemed to have little idea of the concepts, and appeared not to have been to the lectures, tuts or even read the study guide.

Social Performance of Organizations

Social Performance of Organizations

Assignment 1: Social Performance of Organizations

Due Week 4 and worth 240 points


According to the textbook, the current world economy is increasingly becoming integrated and interdependent; as a result, the relationship between business and society is becoming more complex. Use the Internet to research one (1) of the following organizations:

De Beers Diamond Company 
National Football League (NFL) 
British Petroleum (BP)
National Rifle Association (NRA)

Write a six to eight (6-8) page paper in which you:

Specify the nature, structure, types of products or service of your chosen organization, and two (2) key factors in the organization’s external environment that can affect its success. Provide explanation to support the rationale. 
Examine three (3) salient stakeholders of the chosen organization based on their key roles and relationships with the company.
Suggest five (5) ways in which the primary stakeholders can influence the organization’s financial performance. Provide support for the response.
Specify one (1) controversial corporate social responsibility concern associated with your selected organization. 
Assuming you are the leader of the most influential stakeholder group, outline a plan to form a stakeholder coalition to force the organization to address your chosen controversial issue. The plan should include the key steps that you would take to identify members for your coalition group, the major reasons why you believe that the particular target group can help you to accomplish your goal, and the method you would utilize to foster collaboration among the various groups you target. 
Assume the role as the leader of the most influential stakeholder group, and indicate three (3) potential challenges that you may face in encouraging stakeholders to form a coalition to help you achieve your goals. Suggest the significant steps that you would take in order to overcome these challenges that you have identified. Justify the response.
Use at least four (4) quality references. Note: Wikipedia and other Websites do not qualify as academic resources.
Your assignment must follow these formatting requirements:

Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:

Analyze the relationship between business and society, and the ways in which they are part of an interactive system.
Recommend ways stakeholders can influence the destiny of both business and society.
Analyze the various primary and secondary stakeholder groups, their roles, and relationships.
Analyze the multiple environments of an organization.
Compare and contrast the concepts of corporate social responsibility, citizenship, and global citizenship.
Analyze ways ethical challenges affect the multiple functions of business.
Use technology and information resources to research issues in business and society.
Write clearly and concisely about business and society using proper writing mechanics.