General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products.

General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products.

Question

General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products. Benoit Gagnon, a buy-side analyst covering General Mills, has studied the historical growth rates in sales, earnings, and dividends for GIS, and also has made projections of future growth rates. Gagnon expects the current dividend of 1.10 per share to grow at 6 percent for the next two years, and that the growth rate will decline to 3 percent and remain at that level thereafter.

The risk-free rate is 4%, the market risk premium is 6%, and GIS’s beta, assumed to be 0.50.

Required:

Compute the value of one share of GIS stock using Dividends Valuation Approach.


Shady Sunglasses operates retail sunglass kiosks in shopping malls. Below is information related to the company:

(dollar amounts in thousands)

2014

2015

2016

2017

2018

2019

Net Cash Flow from Operations

564

628

854

1059

1345

1655

Interest Expense after tax

122

134

148

145

155

148

Decrease (Increase) in Cash Required for Operations

-75

-54

-48

-32

-61

-48

Net Cash Flow from Investing

-287

-300

-310

-285

-294

-277

Net Cash from Debt Financing

210

204

140

85

-40

-46

Present Value Factors (Re = 8.5%)

0.922

0.849

0.783

0.722

0.665

Common Shares Outstanding

in thousands

1,512

Required:

1. Using the above information and assuming that steady-state growth of FCFE in year 2019 and beyond will be 4%, calculate Shady Sunglasses’ current stock value per share using FCFE valuation model. Remember to adjust the present value for midyear discounting.

2. Using the above information and assuming that steady-state growth of FCFF in year 2019 and beyond will be 4%, and WACC = 8.5%, compute Shady Sunglasses’ current firm value per share using FCFF valuation model. Remember to adjust the present value for midyear discounting.

accounts- In the Green Company, the beginning and ending balances in Land were $198,000 and

accounts- In the Green Company, the beginning and ending balances in Land were $198,000 and

Question

24. In the Green Company, the beginning and ending balances in Land were $198,000 and $240,000 respectively. During the year, land costing $45,000 was sold for $45,000 cash, and land costing $87,000 was purchased for cash. The entries in the reconciling columns of the worksheet will include a:

credit to Land $45,000 and a debit to Sale of Land $45,000 under financing activities.

credit to Land $45,000 and a debit to Sale of Land $45,000 under investing activities.

debit to Land $87,000 and a credit to Purchase of Land $87,000 under financing activities.

net debit to Land $42,000 and a credit to Purchase of Land $42,000 under investing activities.

25. For each of the following items, indicate by using the appropriate code letter, how the item should be reported in the statement of cash flows, using the indirect method.

A. Added to net income
B. Deducted from net income
C. Cash outflow—investing activity
D. Cash inflow—investing activity
E. Cash outflow—financing activity
F. Cash inflow—financing activity
G. Significant noncash investing and financing activity

1. Decrease in accounts payable during a period

2. Declaration and payment of a cash dividend.

3. Loss on sale of land.

4. Decrease in accounts receivable during a period.

5. Redemption of bonds for cash.

6. Proceeds from sale of equipment at book value.

7. Issuance of common stock for cash.

8. Purchase of a building for cash.

9. Acquisition of land in exchange for common stock.

10. Increase in merchandise inventory during a period.

26. The statement of cash flows is the only required financial statement that is not prepared from an adjusted trial balance. What are the sources of information for preparing a statement of cash flows? Explain how the accrual basis of accounting affects the statement of cash flows.

27. The current assets of Kile Company are $150,000. The current liabilities are $100,000. The current ratio expressed as a proportion is

$150,000 ÷ $100,000.

.67 : 1

1.5 : 1

150%.

28. The following information pertains to Soho Company. Assume that all balance sheet amounts represent both average and ending balance figures. Assume that all sales were on credit.

Assets

Cash and short-term investments

$45,000

Accounts receivable (net)

25,000

Inventory

20,000

Property, plant and equipment

210,000

Total Assets

$300,000

Liabilities and Stockholders' Equity

Current liabilities

$50,000

Long-term liabilities

90,000

Stockholders' equity-common

160,000

Total Liabilities and Stockholders' Equity

$300,000

Income Statement

Sales

$120,000

Cost of goods sold

66,000

Gross margin

54,000

Operating expenses

30,000

Net income

$24,000

Number of shares of common stock

6,000

Market price of common stock

$20

Dividends per share

.50


What is the current ratio for Soho?

.64

1.30

1.80

1.40

29. The following amounts were taken from the financial statements of Palmer Company:

2010

2009

Total assets

$800,000

$1,000,000

Net sales

720,000

650,000

Gross profit

352,000

320,000

Net income

126,000

117,000

Weighted average number of common shares outstanding

90,000

90,000

Market price of common stock

$35

$39


The profit margin ratio for 2010 is

18.4%.

36.0%.

18.0%.

17.5%.

30. The following financial statement information is available for Howard Corporation:

2010

2009

Stockholders' equity common

$330,000

$270,000

Net sales

784,000

697,000

Cost of goods sold

406,000

377,000

Net income

112,000

80,000

Tax expense

48,000

29,000

Interest expense

14,000

14,000

Dividends paid to preferred
stockholders

22,000

20,000

Dividends paid to common
stockholders

15,000

10,000


The return on common stockholders’ equity for 2010 is

25.0%.

37.3%.

30.0%.

27.3%.

31. Direct materials and direct labor of a company total $6,000,000. If manufacturing overhead is $3,000,000, what is direct labor cost?

$6,000,000

$3,000,000

$0

Cannot be determined from the information provided

32. Cost of goods manufactured is calculated as follows:

Direct materials used + direct labor + manufacturing overhead – beginning WIP + ending WIP.

Beginning WIP + direct materials used + direct labor + manufacturing overhead – ending WIP.

Direct materials used + direct labor + manufacturing overhead – ending WIP – beginning WIP.

Beginning WIP + direct materials used + direct labor + manufacturing overhead + ending WIP.

33. Dolan Manufacturing Company's accounting records reflect the following inventories:

Dec. 31, 2010

Dec. 31, 2009

Raw materials inventory

$310,000

$260,000

Work in process inventory

300,000

160,000

Finished goods inventory

190,000

150,000


During 2010, $400,000 of raw materials were purchased, direct labor costs amounted to $500,000, and manufacturing overhead incurred was $480,000.
The total raw materials available for use during 2010 for Dolan Manufacturing Company is

$350,000

$660,000

$260,000

$710,000

34. Given the following data for Mehring Company, compute (A) total manufacturing costs and (B) cost of goods manufactured:

Direct materials used

$180,000

Beginning work in process

$30,000

Direct labor

150,000

Ending work in process

15,000

Manufacturing overhead

225,000

Beginning finished goods

38,000

Operating expenses

263,000

Ending finished goods

23,000

(A)

(B)

$555,000

$540,000

$540,000

$570,000

$570,000

$585,000

$555,000

$570,000

35. Barr Mfg. provided the following information from its accounting records for 2010:

Expected production

30,000 labor hours

Actual production

28,000 labor hours

Budgeted overhead

$600,000

Actual overhead

$580,000


How much is the overhead application rate if Barr bases the rate on direct labor hours?

$18.67 per hour

$20.71 per hour

$20.00 per hour

$19.33 per hour

36. Gulick Company developed the following data for the current year:

Beginning work in process inventory

$120,000

Direct materials used

72,000

Actual overhead

144,000

Overhead applied

108,000

Cost of goods manufactured

132,000

Total manufacturing costs

360,000



Gulick Company's direct labor cost for the year is

$180,000.

$108,000.

$144,000.

$36,000.

37. Greer Company developed the following data for the current year:

Beginning work in process inventory

$68,000

Direct materials used

104,000

Actual overhead

88,000

Overhead applied

92,000

Cost of goods manufactured

450,000

Total manufacturing costs

428,000


How much is Greer Company's direct labor cost for the year?

$164,000

$254,000

$300,000

$232,000

38. Essay Question

(a) Distinguish between the two types of cost accounting systems. (b) May a company use both types of cost accounting systems?

39. In applying the high-low method, what is the fixed cost?

Month

Miles

Total Cost

January

80,000

$ 96,000

February

50,000

80,000

March

70,000

94,000

April

90,000

130,000

$14,000

$50,000

$36,000

$17,500

40. Fessler, Inc. has a product with a selling price per unit of $200, the unit variable cost is $75, and the total monthly fixed costs are $300,000. How much is Fessler's contribution margin ratio?

37.5%

62.5%

150%

266.6%

41. A company sells a product which has a unit sales price of $5, unit variable cost of $3 and total fixed costs of $120,000. The number of units the company must sell to break even is

24,000 units.

40,000 units.

60,000 units.

240,000 units.

42. Fixed costs are $300,000 and the variable costs are 75% of the unit selling price. What is the break-even point in dollars?

$1,200,000

$400,000

$900,000

$700,000

43. Sales (50,000 units) $1,000,000, direct materials and direct labor $500,000, other variable costs $50,000, and fixed costs $180,000. What is Boswell break-even point in units?

28,125.

25,556.

16,364.

20,000.

44. A company's planned activity level for next year is expected to be 100,000 machine hours. At this level of activity, the company budgeted the following manufacturing overhead costs:

Variable

Fixed

Indirect materials

$140,000

Depreciation

$60,000

Indirect labor

200,000

Taxes

10,000

Factory supplies

20,000

Supervision

50,000

A flexible budget prepared at the 80,000 machine hours level of activity would show total manufacturing overhead costs of

$384,000.

$408,000.

$360,000.

$288,000.

45. A company's planned activity level for next year is expected to be 100,000 machine hours. At this level of activity, the company budgeted the following manufacturing overhead costs:

Variable

Fixed

Indirect materials

$120,000

Depreciation

$50,000

Indirect labor

160,000

Taxes

10,000

Factory supplies

20,000

Supervision

40,000

A flexible budget prepared at the 90,000 machine hours level of activity would show total manufacturing overhead costs of

$300,000.

$360,000.

$370,000.

$270,000.

46. A company's planned activity level for next year is expected to be 100,000 machine hours. At this level of activity, the company budgeted the following manufacturing overhead costs:

Variable

Fixed

Indirect materials

$90,000

Depreciation

$37,500

Indirect labor

120,000

Taxes

7,500

Factory supplies

15,000

Supervision

30,000

A flexible budget prepared at the 90,000 machine hours level of activity would show total manufacturing overhead costs of

$202,500.

$277,500.

$225,000.

$270,000.

47. Match the items below by entering the appropriate code letter in the space provided.

Direct fixed costs

Investment center

Flexible budget

Return on Investment

Budgetary control

Indirect fixed costs

Controllable costs

Profit center

Static budget

Responsibility reporting system

Responsibility accounting

Management by exception

1.

A measure of the profitability of an investment center computed by dividing controllable margin (in dollars) by average operating assets.

2.

A part of management accounting that involves accumulating and reporting revenues and costs on the basis of the individual manager who has the authority to make the day-to-day decisions about the items.

3.

A projection of budget data at one level of activity.

4.

The use of budgets to control operations.

5.

Costs which are incurred for the benefit of more than one profit center.

6.

A responsibility center that incurs costs, generates revenues, and has control over the investment funds available for use.

7.

The review of budget reports by top management directed entirely or primarily to differences between actual results and planned objectives.

8.

The preparation of reports for each level of responsibility shown in the company's organization char.

9.

Costs that relate specifically to a responsibility center and are incurred for the sole benefit of the center.

10.

Costs that a manager has the authority to incur within a given period of time.

11.

A responsibility center that incurs costs and also generates revenues.

12.

A projection of budget data for various levels of activity.

48. Essay Question

The master budget and flexible budgets are important aids to management in performing the management functions of planning and control. Briefly describe how planning and control are facilitated by preparing a master budget and flexible budgets. How are these two types of budgets interrelated with planning and control?

49. Essay Question

Managers are motivated to accomplish objectives if they feel that their efforts will be fairly evaluated. Explain why an organization may use different bases for evaluating the performance of managers of different types of responsibility centers.

I Need help in manufactyring and product design assignment MFG 240 and I need three diff papers

I Need help in manufactyring and product design assignment MFG 240 and I need three diff papers

Question

MFG240 Name___________________

March 19, 2014

100 points

Must be typed except calculations. They can be written

1) (3 points) Why is machining so difficult to analyze

For the following show all work. If there is something not included, make an assumption and WRITE it down. 5 points each unless otherwise specified

2) (10 points) I have an unknown material in which I have been asked to turn for an experiment. The people contracting me want to know the shear strength of the material. I measure the cutting force at 400 lbs and the thrust force at 285 lbs. The tool I am using has a rake angle of 8º. The width of cut is 0.210 inches and the chip thickness before the cut is 0.010 inches. If the chip thickness ratio is 0.4 inches what is the shear strength of the material?

3) (10 points) A turning operation is to be performed on a lathe with an efficiency of 85%. The material being machined is an alloy steel with a unit horsepower of 1.6 hp / (in3/min). Cutting speed is 350 ft/min and feed is .012 in/rev. Depth of cut is .010 inches. Can this job be performed on a 10 hp lathe. Show all work.

4) Some tools use coatings that reduce the coefficient of friction. How does this affect the cutting process?

5) What are the three parameters that you as an engineer can affect in a machining operation

6) How does the heat generated during cutting affect the operation?

7) What are the main failure types found in tools (5 of them)? Where do these typically occur on the tool?

8) What properties are desired in a material for a cutting tool?

9) (10 points) In a turning operation the operator obtained a tool life of 10 minutes at a speed of 400 ft/min and a tool life of 50 minutes at a speed of 200 ft/min.

a. What is the tool life at a speed of 100 ft/min?

b. What speed would he have to run if he wanted a tool life of 30 minutes?

10)(10 points) If a bar of SAE 1040 is to be turned with a high speed steel tool with a feed of 0.015" per revolution, and a depth of 0.050". Previous experiments have revealed that the following cutting velocities yielded the following tool lives,

90 fpm for 30 min.

80 fpm for 90 min.

75 fpm for 150 min.

a) estimate the cutting speeds to get tool lives of 60 and 120 minutes.

b) calculate the mrr at the two speeds found in part a).

11)(10 points) The parameters in a tool life equation come out to be n = 0.4 and C = 450. What % increase or decrease occurs in the tool life if the speed

a. Is increased by 20%

b. Is decreased by 30%

12)(10 points) You are going to machine a .25 inch hole in a block of 1020 CRS for a depth of .16 inches. Please specify a drill for this and all its parameters. Also specify its feed and speed. Finally give me a cycle time

13)(10 points) You are to machine a piece of bar stock. The material is 6061 aluminum. You are to turn the material from a diameter of .5 inches to .3 inches. Please specify an insert to do this job. Be specific (use the internet) Also specify a feed, speed and depth of cut. The length of cut will be the letters in your last name * (.2). Tell me how long this will take

,
Attachments
(39.5 KB)

ACTP 5007 – Worksheet

ACTP 5007 – Worksheet

Question Worksheet 1 - Time Value of Money

Scenario 1

Jonas Smith wants to accumulate a sum of money to pay for his MACC
program. Rather than investing a single amount today, he decides
to invest $5,000 a year over the next three years in a savings account
account paying 8% interest compounded semi-annually. He decides to
make the first payment to the bank immediately. How much will Jonas
have available in his account at the end of three years?


Scenario 2

Assume that you borrow $1,000 from a friend and intend to repay the
amount in five equal annual installments beginning one year from today.
Your friend wishes to be reimbursed for the loan at 7% per year.
What is the required annual payment that must be made to repay the
loan in five years?


Scenario 3

On June 30, 2010, Greyson Inc. issued $200 million of 10% bonds.
The bonds pay interest semi-annually and mature on June 30, 2030.
They were sold to yield 12% interest. What is the selling price of the
bond?


Instructions:

Using the tables at the back of Chapter 6, answer the questions above.
You MUST show all work in order to receive credit for the problems.

uop psy301 week 2 Learning Team Instructions:Worksite Development Paper and Presentation

uop psy301 week 2 Learning Team Instructions:Worksite Development Paper and Presentation

Question

1. Learning Team Instructions:Worksite Development Paper and Presentation

· Developa 1,400- to 1,800-word workable plan to improve the emotional skills and competencies of people in one of the team member’s place of employment.. Refer to Goleman’s 5 Competencies.

· Delivera 10- to 15-minute presentation using 8- to 10-PowerPoint® slides.

· This assignment must include at least 1 references from your text (Goleman)and one additional reference from your reading/research.




1. Learning Team Assignment:Worksite Development Paper and Presentation

· Submit your Worksite Development paper as outlined in Week One. Select one LT member to submit the final paper and Power Point presentation to their individual forum. Once graded I will post the paper/projectback to the LT forum. Your individual grade for the paper/project will be posted to your Week Two Grade Summary following receipt of the LT Evaluation. Note: The LT Evaluationis considered as part of your grade.

· Deliveryour presentation as outlined in Week One.

human resource strategies and policies and practices that may impact on your the ease of doing business in China..

human resource strategies and policies and practices that may impact on your the ease of doing business in China..

Question

This SLP will focus on human resources and human resource strategies and policies and practices that may impact on your the ease of doing business in China..

Examine the folloiwng websites and papers:

Health Index from UNDP:

World Bank Indicators: Crime, Literacy, Secondary Enrollment, Fertility, Other Health Measures at

Paper by Prof. Click to Read

Paper by Prof. Click to Read

Please write a 2 page paper, analyzing information about education and health issues on the ease of doing business in China. Post your assignment.

SLP 3 Assignment Expectations

  • Continue to write about China
  • Write 2 pages discussing the human resources affect the ease of doing business in China Use examples from various measures to illustrate human resource issues and level of development inyour country.
  • List supporting references and cite sources.

BIO – In the Calvin cycle Determine: How many molecules of CO2

BIO – In the Calvin cycle Determine: How many molecules of CO2

Question 1)In the Calvin cycle Determine: How many molecules of CO2 must be fixed to form a molecule of glucose? How many molecules of ATP are needed to make one Glyceraldehyde 3-phosphate? How many NADPH? How many NADPH would be needed to make one glucose?

(could you explain in one turn in the calvin cycle what it creates, rather than the full summary of the 3 turns. thats why i am having difficulty answering these questions^)

2) What is photorespiration and why does it occur? What does it teach us about the evolution of life on earth?

3) When considering the function of the extracellular matrix, what is the function of (a) the cytoskeleton (b) integrins (c) Laminin proteins (d) collagen

Accounts Multiple Questions

Accounts Multiple Questions

Question 1. Balances at year-end
From the balance sheet 2013 2012
Accounts Receivable $1,560,200 $1,210,920
Allowance for doubtful accounts $79,000 $64,600
Murray recorded no write offs or recoveries during 2013. what was the amount of bad debt expense reported in 2013?

2. IBM signs an agreement to lend one of its customers $200,000 to be repaid in one year at 5.5% interest. IBM would recognize:
(Choices) Unearned Revenue, Notes Receivable, note payable, accounts payable

3. A company lends its supplier $150,000 for 3 years at a 6% annual interest rate. Interest payments are to be made twice a year. Each interest payment will be for
(Choices) $27000, $4500, $9000, $13500

4. Company A lends $100,000 to company B. The interest on the loan is reported
(Choices) as a revenue to company A and an expense to Company B
as an expense to company A and a revenue to Company B
as an asset to Company A and a revenue to Company B
as a liability to Company A and an asset to Company B

5. The Splendor in the Grass Corporation provides $6000 worth of lawn care on account during the month. Experiences suggests that about 2 % of net credit sales will not be collected. According to the revenue recognition principle and the matching principle, the company should
(Choices) wait until the accounts are determined to be uncollectible before making an entry for bad debt expense
record an estimate of bad debt expense in the same period as the lawn care is provided
not report the sales revenue until it collects payment
increase the value of its liabilities with an adjustment

6. When a company that uses the allowance method writes off an uncollectible account
(choices) total assets, revenues, and expense remain the same
total assets decrease
total liabilities increase
total expenses increase and total revenues increase

7. On April 1, 2013 a company lends a corporate customer $80,000 at 7% interest. The amount of interest revenue that should be recorded for the year ended December 31, 2013 is:
(Choices) $5600, $0, $4200, $1400

8. The amount of uncollectible accounts at the end of the year is estimated to be $25000 using the aging of accounts receivable method. The balance in the Allowance for Doubtful Accounts account is an $8000 DEBIT before adjustment. Assuming no accounts are written off during the period. What will be the amount of bad debt expense for the period?
(Choices) $33,000, $8000, $17000, $25000

ACC121 -Extra Credit Assignment 3 Problems Solution

ACC121 -Extra Credit Assignment 3 Problems Solution

Question

1. Budgeting (8 points)
Ratario Company has budgeted the following unit sales for the first quarter of 2014:

Units
January 12,000
February 17,000
March 15,000

It takes 3 pounds of direct materials, which cost $6 per pound, to manufacture one unit of product. It is the company’s policy to have a finished goods inventory on hand at the end of each month equal to 30% of next month’s sales and to maintain a direct materials inventory at the end of the month equal to 20% of the next month’s production needs. The inventory levels at December 31, 2013, were in accordance with company policy.

Instructions
Answer the following independent questions and show computations to support your answers.
a. Calculate the number of units that should be scheduled for production in the month of February.
b. What was the number of units in ending finished goods inventory at December 31, 2013?
c. What was the number of pounds in ending direct materials inventory at December 31, 2013?
d. What was the number of pounds and the dollar amount of direct materials purchases budgeted for the month of January?

2. Variance Analysis (8 points)
Pillow Talk manufactures luxury down bed pillows. Each pillow requires 3.9 pounds of down and takes 0.25 hours of direct labor. The standard cost of the down used is $6.50 per pound, and the standard labor cost is $12 per hour. In November, Pillow Talk purchased and used 25,000 pounds of down for $157,500. It manufactured 6,200 pillows. Payroll reported a total of 1,520 direct labor hours at a cost of $17,936.

Instructions
(a) Compute the materials price and quantity variances and indicate whether the variances are favorable or unfavorable.
(b) Compute the labor price and quantity variances and indicate whether the variances are favorable or unfavorable.

3. Capital Budgeting (9 points)
Weston Company is considering a capital investment of $145,000 in new equipment. The equipment is expected to have a useful life of 10 years with no salvage value. Depreciation is computed by the straight-line method. During the life of the investment, annual net income and cash inflows are expected to be $11,000 and $25,500, respectively. Easton requires either a 10% cost of capital "hurdle" rate, or a payback period of 7 years.

Instructions
Compute the (a) cash payback period, (b) net present value, (c) internal rate of return (to the nearest percent), and (d) annual rate of return. Show all computations. State whether the project should be accepted or rejected for each of the four capital budgeting techniques.
Present Value of an Annuity of 1
(n)
Periods 5% 6% 8% 9% 10% 11% 12% 15%
10 7.72173 7.36009 6.71008 6.41766 6.14457 5.88923 5.65022 5.01877

Finance Four Multiple Choice Questions

Finance Four Multiple Choice Questions

Question #1.Choose the Most Correct answer for relative costs of components of a firm's capital structure. Where: RS = Rate investors demand on a firm's STOCK RD = Rate investors demand on a firm's DEBT (i.e., the Yield to Maturity of the firm's debt). WACC = The firm's Weighted Average Cost of Capital t = the firm's tax rate. "<" means "Less Than" ">" means "Greater Than or equal to"
a. WACC > RS > RD
b. RS < RD(1-t) < RD
c. RS > RD > WACC
d. None of these relationships is correct.
e. RS > RD > RD(1-t)

#2.Assuming that a firm pays taxes, a relatively small increas in the DEBT to EQUITY Ratio should result in:
a. A decrease in the firm's WACC and a decrease in the value of the firm.
b. An increase in the firm's WACC and a decrease in the value of the firm.
c. An increase in the firm's WACC and an increase in the value of the firm.
d. A decrease in the firm's WACC and an increase in the value of the firm.
e. No change in the value of the firm's WACC or value.

#3.The bonds your company just issued carry a yield to maturity of 9%, and you have preferred stock outstanding which pays a 7% dividend yield. Your company has a tax rate of 33%. The president of your company has just suggested to you that you issue more preferred stock and buy back your bonds. What should you tell her?
a. Bad idea. Since the cost of preferred is lower than the cost of the debt, your cost of capital will go down by using more preferred.
b. Good idea. Since the cost of preferred is lower than the cost of the debt, your cost of capital will go down by using more preferred.
c. Bad idea. Since the after-tax cost of debt is lower than the after-tax cost of the preferred, your cost of capital will go up by using more preferred.
d. Bad idea. Since the after-tax cost of debt is lower than the after-tax cost of the preferred, your cost of capital will go down by using more preferred.
e. Good idea. Since the after-tax cost of debt is lower than the after-tax cost of the preferred, your cost of capital will go down by using more preferred.

#4.Consider this example:
ACME Roadkill, Inc. is looking at setting up a new manufacturing plant in Alien Landing, NV. The company bought some land four years ago for $7 million in anticipation of using it as a training facility, but the company has since decided to lease facilities elsewhere. The land was appraised last week for $5.2 million.

The company now wants to build its new manufacturing plant on this land; the plant will cost $12 million to build, and the site requires $1 million worth of draining used oil before it is suitable for construction.

What is the proper cash flow amount that they should use as the initial investment in fixed assets when evaluating this project?
a. $0, the cost of the land is a sunk cost.
b. $5.2 million, the appraised value of the land.
c. $7 million, the original cost of the land.
d. $17.2 million, the appraised value of the land plus construction costs.
e. $18.2 million, the appraised value of the land plus improvements and draining.
f. $20 million, the original cost of the land, plus improvements, plus the draining cost.