Blog

EDR 7101-The following small data set is from a study conducted

EDR 7101-The following small data set is from a study conducted

EDR 7101-The following small data set is from a study conducted

Subject: Mathematics / Statistics
Question
EDR8202
The following small data set is from a study conducted within a single middle school. Fundamentally,
this study is a comparison of the differences between male and female teachers in personal Confidence
Scores, and was conducted to determine if a relationship exists between the number of Years of
Experience and Confidence Scores. Gender
Male
Male
Female
Male
Female
Female
Male
Male
Male
Female
Female
Male
Female
Female
Male
Female
Male
Female
Male
Female Years of Experience
15
3
12
8
23
9
37
14
10
4
11
1
3
7
2
21
28
9
5
3 Confidence Scores
110
117
118
120
104
100
107
115
114
115
115
100
117
115
103
145
115
115
110
210 Using scholarly writing and proper APA format, complete, and then submit the following:
1. Enter these data into an SPSS data file. Ensure the variables are correctly labeled (nominal, ordinal,
scale). Determine what question might be asked related to the Confidence Score of the last person in
the data set.
2. Use SPSS to conduct basic descriptive statistics on the variables (e.g., frequency distribution, mean,
median, mode, standard deviation, standard error).
3. Use SPSS to conduct a t-test to determine if a significant difference exists. Calculate the Pearson’s
Correlation between Years of Experience and Confidence Scores.
4. Use SPSS to create a scatter plot of Years of Experience and Confidence Scores.
5. Use scholarly writing and proper APA format to briefly discuss in narrative form, the results of the ttest and the correlation.
6. Use scholarly writing and proper APA format to present a table that clearly depicts several of the
descriptive statistics calculated earlier.
7. Use scholarly writing and proper APA format to present a figure that depicting the scatter plot you
generated earlier.
8. Include an appendix that contains all SPSS output (copied and pasted) for the items above.

MAR 3023-Which of the following types of survey tends to be

MAR 3023-Which of the following types of survey tends to be

MAR 3023-Which of the following types of survey tends to be

Subject: Business / Marketing
Question
Which of the following types of survey tends to be the most expensive?
Mail survey
Internet survey
Fax survey
Telephone survey
Personal interview survey

Andrew is the trendsetter on the Golf team. When he bought Ping clubs, four other members of the team had them within a month. When he bought Nike golf shoes, five others bought the same ones. Andrew is the team’s:
primary aspirational leader
opinion leader
secondary aspirational leader
syncratic influence
autonomic influence

In order to distinguish a consumer product from an organizational product, what question(s) do you need to ask?
Why was the product purchased?
Who purchased the product?
What was the product that was purchased?
All of the above
A and B only

Being customer oriented, stressing long-term profitability and integrating and coordinating marketing and the other functions of the firm, are called
The Marketing Concept
Macro Marketing
The Goal of Marketing
Total Quality Management
None of the above

The particular group of alternatives a consumer considers when making a buying decision is referred to as the consumer’s
Evaluative criteria
Reference group
Problem alternatives
Evoked set
Alternative group

Charles Jones developed the specifications for some new laptop computers being purchased by his employer for the engineers at his company. Charles’ personal assistant, Pat Brown collected information about a variety of computer systems for him to examine. The specifications were approved by Janine Smith, his boss. Richard Davis chose to buy the computers from Dell, and negotiated a great price due to the large volume of computers being purchased.

Pat’s role in the buying center is that of a:
gatekeeper
decider
influencer
buyer
user

The marketing philosophy that focuses on satisfying customer needs and wants while enhancing individual and societal well-being is called

A production orientation
A sales orientation
A market orientation
A societal marketing orientation
None of the above

All of the following are characteristics of organizational buying EXCEPT:
Organizational buyers are fewer in number than consumers.
Organizational buyers tend to be more geographically concentrated than consumers.
Organizational buyers prefer to buy directly from manufacturers.
Organizational buyers possess a comparative expertise in buying when compared with consumers.
Organizational buying tends to focus more on single transactions than consumer buying.

 

POLI330 Week 1 TCO Assessment Latest 2017 April

POLI330 Week 1 TCO Assessment Latest 2017 April

POLI330 Week 1 TCO Assessment Latest 2017 April

Subject: Political Science / General Political Science
Question
1. Question :

(TCO 1) What were your economic left/right results?

Question 2. Question :

(TCO 1) What were your social libertarian/authoritarian results?

Question 3. Question :

(TCO 1) If a person believes that market should regulate itself, and that government should stay out of business, would he or she fall more to the right or the left side of the political scale?

Right

Left

Question 4. Question :

(TCO 1) If a person believes that federal agencies such as the FDA, EPA, and SEC serve a public good, is he or she moving more to the right or left of 100% capitalism?

Right

Left

Question 5. Question :

(TCO 1) If a person feels that the government is needed to ensure that all people obtain equality, would he or she fall more on the right or the left of the economic scale?

Right

Left

Question 6. Question :

(TCO 1) If a person believes that mandatory gun safety classes should be required to buy a gun, would he or she move up or down the social scale?

Up

Down

Question 7. Question :

(TCO 1) If a person believes that Christianity is or should be the national religion of the United States, would he or she move up or down the social scale?

Up

Down

Question 8. Question :

(TCO 1) If a person believes that he or she knows more about his or her own life than the government, and thus should have the authority to make his or her own decisions, would he or she move more up or down the social scale?

Up

Down

What is the role of the government on the economy

What is the role of the government on the economy

What is the role of the government on the economy

Subject: Economics / General Economics
Question
1) What is the role of the government on the economy?
2) What is fiscal policy? What is monetary policy?
3) What is discretionary fiscal policy?
4) What is Net Taxes?
5) What is the difference between income and disposable income?
6) What is a budget deficit, or a budget surplus?
7) What does affect planned investment?
8) How does the government spending affect GDP?
9) What is the government multiplier? What is the formula for the government multiplier?
10) What is the tax multiplier? What is the formula for the tax multiplier?
11) Why the tax multiplier has a minus sign?
12) What is the balanced-budget multiplier? Why does it equal to 1?
13) What is the federal budget?
14) What is the federal debt? How does the surplus or deficit affect the federal debt?
15) What is aggregate output? Aggregate income?
16) What does it mean that we are talking in real terms?
17) What are automatic stabilizers, destabilizers and Fiscal drag?
18) What is defined as full-employment budge? What about structural deficit? Cyclical deficit?
19) Do you know how to determine equilibrium with taxes and government spending?
20) What is money? What is the difference between money, income and wealth?
21) What is barter? What is the problem with barter?
22) What is the main advantage of money? What is the main disadvantage of money?
23) What is a unit of account? What are commodities monies? Fiat? Legal tender?
24) Define Currency debasement 25) What are the differences between M1 (transactions money) and M2 (broad money)?
26) What is included when calculating “beyond M2?”
27) What is the Federal Reserve?
28) What are reserves? What is the required Reserve Ratio?
29) How money is created through banks?
30) What is the money multiplier? How is calculated?
31) What is the Federal Open Market Committee (FOMC)? What about the Open Market Desk?
32) What are the main functions of the Federal Reserve?
33) What does it mean that the Federal Reserve is the lender of last resort?
34) What are the two mandates of the Federal Reserve?
35) What determines the demand for money?
36) What is the relationship between interest rates and security prices?
37) How does the Federal Reserve Use Open Market Operations and why?
38) What is the discount rate?
39) What is the relationship between the amount of money and the interest rate?

 

HCAD 4354 – Economics for Healthcare Industry Analysis

HCAD 4354 – Economics for Healthcare Industry Analysis

HCAD 4354 – Economics for Healthcare Industry Analysis

Subject: Economics / General Economics
Question
HCAD 4354 – Economics for Healthcare Industry Analysis Term Paper
1. Purpose
The purpose of this term paper is to provide each student with the opportunity to
apply economic analysis to a U.S. healthcare related industry and to learn how to
deal with business problems from an economic perspective. There are five
industries related to U.S. healthcare for choices: private health insurance physician services hospital services pharmaceutical long-term care
Students are supposed to choose one among the five choices to develop analysis
paper for the industry in the U.S. operation. 2. Defining the Industry
It is very important to define the industry precisely; otherwise, there will be a
tremendous amount of unrelated data available. The U.S. Standard Industrial
Classification (SIC) system has been replaced by the North American Industry
Classification System (NAICS) (you can find them trough any website search
engine). These codes are widely adopted for record keeping purposes and are often
used to index private publication such as market guides, directories of companies,
and periodical indexes. Familiarize yourself with the SIC/NAICS categories.
Remember: it is important to either narrow or broaden your industry definition based
on how much information you are finding. 3. Data Collection
For any strategic planning process, it is important to understand the industry in
which you are or will be operating, for without an understanding of that industry,
your strategy is unlikely to succeed. Every manager must determine for him/herself
the information required to address the decision at hand. In an increasingly
competitive and dynamic business environment, success depends on a
continuous updating of information on market trends, competitors, and customers. 1 There are two types of data that can be collected and analyzed: (a) primary data
collected from government record; (b) secondary data collected from reference
materials. Prior to conducting any primary research, savvy managers know that
secondary research should be the starting point in the data collection process. The
government and other agencies publish a great deal of information which can be
invaluable in an industry assessment, and which is readily available if you know
where to look. While you may not be able to find out everything you need to know,
secondary information is an essential management tool.
The sources of this information are abundant (in printed documents, via the
Internet, etc.), however, they are not always easy to find. Your first challenge is to
know where to look and find the most current, relevant, accurate, and reliable
information, in a timely manner, when there are so many sources to choose from
and investigate. Data must be current, reliable, unbiased, accurate, and relevant
to the problem at hand if they are to be useful to the manager. Good managers
rely on this information to make decisions that are based on the realities of the
marketplace, not their opinions or conjectures. Decisions based on information,
however, are only as good as the information itself. 4. Requirements
1. Each paper must include a cover sheet (see the MS-Word file "COVER
SHEET". 2. Your paper should have a logical flow to it, and make use of appropriate
headings and subheadings. Follow the suggested format described in Section
5 below. 3. Any table, graphic (such as bar charts, trend lines, etc.) must be included in
an appendix at the end of the paper. 4. The text of your paper (the text only, not including Table of Contents,
References, Tables, Charts, and other appendices should be about 10~12
pages. The text must be double-spaced with font size 12 with 1 inch margin
in the MS Word format. For the whole paper, limit the length within 15 pages
(not including the cover page). 5. Be sure to acknowledge the source of all information from outside sources in
the text (e.g., “According to Wards’ Automotive News, December 2002, GM
has a …”). For article citation, author name and year are required; for
example, (Smith, 2007). Also be sure to have a list of references (i.e. URL is
required for online reference) at the end of your paper. Use of information
from outside sources that is not attributed will be considered plagiarism. The
consequences of academic dishonesty will result in getting a failing grade in
this course. 2 6. Quotations must correspond exactly with the original in wording, spelling, and
punctuation. Page numbers must be given. Changes must be indicated: use
brackets to identify insertions; use ellipsis dots (…) to show omissions. Also
indicate where emphasis has been added. Only lengthy quotations (more
than 50 words) should be separated from the text; such quotations must be
double-spaced and indented at the left margin. References to authors in the
text must exactly match those in the Reference/Bibliography section. 7. Tables must be designed to fit comfortably on a page. For tables, use the
‘create table’ feature in MS-Word. Each table must have a title and be
numbered consecutively with Arabic numbers. Do not abbreviate in column
headings, etc. For example, spell out "percent"; do not use the percent sign.
Place a zero in front of the decimal point in all decimal fractions (i.e., 0.357,
not .357). Each table should be no more than 10 columns wide. 8. Figures should be supplied as high quality. Figures should be produced in
black and white. Tints and complex shading should be avoided. Figures must
have a title and be numbered consecutively with Arabic numbers. 9. References should be prepared in general accordance with the APA
(American Psychological Association). The references themselves should be
in 10 point font and formatted as a left margin indented with the first line
realigned with the left margin. Below are some examples of different citations.
Citing a Journal Article
Carland, J.W., F. Hoy, W.R. Boulton & J.A. Carland (1984). Differentiating entrepreneurs
from small business owners. Academy of Management Review, 9(2), 354-359.
Citing an Online Journal Article
Fredrickson, B.L. (2000). Cultivating positive emotions to optimize health and well-being.
Prevention & Treatment, 3, Article 0001a. Retrieved November 20, 2000, from
http://journals.apa.org/prevention/volume3/pre0030001a.html
Citing a Book
Carland, J.W. & J.A. Carland (1999). Small business management: Tools for success
(Second Edition). Houston, TX: Dame Publishing.
Citing an Article in a Magazine
G. Gendron & B. Burlingham (1989, April). The entrepreneur of the decade: An interview
with Steve Jobs, Inc., 114-128.
Citing an Article in a Book
Brockhaus, R. H. (1982). The psychology of the entrepreneur. In C. Kent, D. Sexton, & K.
Vesper (Eds.), Encyclopedia of Entrepreneurship (pp. 39-57). Englewood Cliffs:
Prentice-Hall. 3 Citing an Internet Source
GVU’s 8th WWW user survey. (n.d.) Retrieved August
http://www.cc.gatech.edu/gvu/usersurveys/survey1997-10/ 8, 2000, from 10. Final versions of your paper should reach the instructor in clear and
grammatically correct English. Proof reading, before you submit the final
version, is highly recommended. Typos and grammar errors will damage your
score in grading for sure. 5. Paper Outline and Grading Weight
I. Table of Contents (1 page): 2%
II. Executive Summary (1 page): 10%
The last part you write, but which should appear first in your report, is the
Executive Summary. An Executive Summary is usually a one-page synopsis,
touching on key, insightful highlights of the report. Picture the Executive
Summary as satisfying someone’s request to "just give me the short version”.
It should contain the following two parts:
A. A brief summary of what the industry paper says. (5%)
B. Identify the common managerial strategies for profit growth applied by
existing firms and provide your own recommendation. In addition, please
comment whether a potential entrant should or should not enter this
industry now. (5%)
III. Introduction (1~2 pages): 10%
A. B.
C. D. Description. This is to be a general introduction to the particular industry.
What does the industry produce? What is SIC/NAICS code and
description? (3%)
History. A brief history. How has the organization of and the nature of
competition in the industry evolved from its earliest beginnings? (3%)
Organization. What parts of the chain of production/service do the firms
undertake themselves and what do they buy from outside suppliers or
pass on to independent distributors or retailers? (2%)
Relevant governmental or environmental factors. What role does
government play in the industry? How does (will) regulation or other
government (future) policy (e.g. reform, trade policy …etc.) affect the
industry? (2%) IV. Market Structure (1 page): 10% 4 You need to answer the following two questions precisely:
A. How can the market structure of the industry best be characterized:
perfect competition, monopolistic competition, oligopoly, or monopoly?
Briefly go over the market characteristics to confirm your definition here.
(5%)
B. How many major firms (up to top four if applicable) are there in the industry
and what is their market share? A table showing the market shares in the
U.S. is required here. (5%) V. Industry Demand (1 page): 10%
A. What are the key determinants of the market demand in your chosen
industry? (5%)
B. Describe the current change (at least one) in the determinants that has
caused the demand change. (5%)
You may want to think about the following factors: population and demographic
changes, new regulation (reform), income and wealth trends, consumer tastes
and preferences, prices of substitutes and complements in consumption,
introduction of new substitutes or complements in consumption, expectations
about the future prices of this particular good/service. VI. Cost Structure (1 page): 10%
You need to answer the following two questions precisely:
A. What are the key determinants of an existing firm’s (1) fixed costs and (2)
variable costs in the short-run? (5%)
B. What is the shape of the existing firm’s (1) average cost cure and (2)
marginal cost curve (i.e. U-shaped or L-shaped)? A graph illustration here
will be a plus. (5%) VII. SWOT Analysis (1~2 page): 15%
SWOT analysis is a structured planning method used to evaluate the Strengths,
Weaknesses, Opportunities, and Threats involved in a business venture. A
SWOT analysis involves specifying the objective (i.e. profit growth) of the
business venture and identifying the internal and external factors that are
favorable and unfavorable to achieve that objective. Setting the objective
should be done after the SWOT analysis has been performed. This would allow
achievable goals or objectives to be set for the organization. 5 Please choose one of the top 4 firms in the industry to analyze the firm’s
objective of profit growth: Strengths: characteristics of the firm that give it an advantage over others
Weaknesses: are characteristics that the firm at a disadvantage relative to
others
Opportunities: external chances to improve performance (e.g. make greater
profits) in the environment
Threats: external elements in the environment that could cause trouble for
the firm A. Please summarize the analysis in a SWOT matrix. (10%) The following
matrix serves as an example: B. Highlight one section in the SWOT matrix to provide your recommendation
briefly. (5%) VIII. Analysis of Competitive Forces (Porter’s five forces) (2 pages): 20%
Please consider each of the following five forces for the industry. In the
beginning of each force, please highlight the force as “strong”, “moderate” or
“weak”.
6 A. The threat of entry by new competitors (4%)
For example, those industries with high entry barriers, such as
pharmaceutical manufacturing, will have fewer firms entering. With fewer
firms, there is less environmental complexity, and it is easier for one firm to
begin to dominate the industry. Economic rents are usually higher in such
an environment and entry becomes more attractive. For industries with a
low barrier to entry, such as the physician service, new service providers
come and go with great rapidity. This prevents dominance by any one, or a
few, firms. Economic rents are usually low.
B. The intensity of rivalry among existing competitors (4%)
What are the current top firms and their market shares in the U.S.? How
they compete (i.e. price or quality)? Any alliance or particular strategy is
practiced now for competition? An industry characterized by high rivalry is
unattractive because it limits the ability to achieve above normal economic
rents. At the other extreme, industries with no rivalry are usually dominated
by a few major firms which could limit strategic flexibility.
C. Pressure from substitute products (4%)
Are the industry’s products/services differentiated and, if so, according to
what characteristics (design, function, price range, geographic market,
etc.)? How innovative is the industry, and what are the sources of
innovation? An industry will be attractive if there is no threat from substitute
products. A substitute is any product or service that will fulfill the same need
while using a different technology. The relevance is that substitutes can
render obsolete the present capital investment of the industry.
D. The bargaining power of buyers (4%)
First, determine who the buyers are. What are the channels of distribution
for the industry? Do not only consider the ultimate consumers unless there
are no intermediaries. Identify significant macro-environmental trends, such
as changes in customer demographics, needs, wants, lifestyle, etc. that
have/will positively/negatively affect the industry. Do buyers have strong
power over firms to negotiate price in this industry? How the power is
exercised?
E. The bargaining power of suppliers (4%)
What are the markets for inputs (labor, machinery, capital, raw materials,
etc.) like? While we were concerned about threats in the "entrants" section,
here we are concerned with power. Do suppliers have power over firms in 7 this industry? The first step is to determine what this industry purchases.
Not in detail, but as a generalization. Focus on suppliers of key items that
firms in this industry must have. Would firms have access to labor on
favorable terms? Does this industry have unions? If so, they limit access to
labor and usually increase costs. Do firms in this industry require highly
skilled knowledge workers? How is the present labor market for this
industry? IX. Conclusion (1 page): 10%
Your analysis should lead you to reasonable conclusions. You have, by
now, discovered a number of factors. State what you consider to be the
opportunities and threats for this industry. Support your final argument as
to whether this industry will be more profitable; or, what managerial
strategies of profit growth for existing firms should be most effective. Make
sure that conclusion/recommendation and executive summary are
consistent. Do not just repeat the sentences in the previous sections. X. References: 3%
Please list the references that you cite, but also a listing of the material that
contributed to your body of knowledge. XI. Appendices (Optional)
Here you might put your tables, charts, or anything else that you think is
important to an understanding of this industry. 8

MKTG 301 – Marketing Planning Document

MKTG 301 – Marketing Planning Document

MKTG 301 – Marketing Planning Document

Subject: Business / Marketing
Question
Objective
Understand and incorporate the various elements that constitute Promotion within your marketing plan.

Overview
Marketing Planning Document 8 explores Promotion – the final “P” of marketing. As an aside, promotion is what most people think of when they think of marketing.

Part One: Introduction
Introduce Marketing Planning Document 8 by explaining what promotion is and the role it plays within the 4Ps of marketing.

Part Two: Resources
Review what you learned in Lessons 12-15 about the various forms of promotion, including content from your textbook and online course material. Note: Be sure to incorporate insights you gained from the Practice Marketing demo – Promotion. You are also encouraged to conduct independent research to enrich your own learning. Please remember to cite your work properly.

Part Three: Prompts and Guiding Questions
Please answer the following prompts and guiding questions relating to promotion:

As you begin thinking about promotion of your product, you must first understand and agree upon what the goal(s) of the promotion you are trying to create?

Are you trying to inform, persuade, remind or connect?
Once you have decided on the goal(s) of your promotion, you are ready to dive into developing your promotional mix in order to reach your target market. Your promotional mix should include advertising, public relations, sales promotion, personal selling, direct marketing, and social media.

According to Lamb, Hair, and McDaniel, âthe ultimate goal of any promotion is to get someone to buy a good or serviceâ (p. 258). As such, use the Hierarchy of Effects Model to develop a strategy for reaching your promotional goal(s).

While you are developing your promotional mix, make sure the message reaching the consumer is the same regardless of the promotional medium. In other words, employ an integrated marketing communication (IMC) strategy while working through the Hierarchy of Effects Model.
You should also address any factors that might affect your promotional mix (i.e., Nature of the Product, Stages in the Product Life Cycle, Target Market Characteristics, Types of Buying Decisions, Available Funds, and/or Push and Pull Strategies).
Donât forget about your salesforce.

If your ultimate goal is to sell something and your company utilizes a salesforce, how will your promotional mix generate leads for your salesforce?
Social media is changing the marketing landscape.

Be sure to discuss how you are using social media to connect with your customers and how social media fits within your overall marketing plan.
When developing the promotional mix section of your marketing plan, please be as specific as possible. Donât just say that you are developing an advertisement. Instead (using the Hierarchy of Effects Model) explain what type of advertisement you plan to use:

Highlight key concepts within your advertising campaign (i.e., message and USP).
What media types will you use (and why are you using them), etc.
If you are feeling super creative and ambitious, provide me an example (i.e., create an actual ad or press release for your campaign). You never know, bonus points may be rewarded for such ambition! Be creative and have fun!

Part Four: Final Artifact and Reflection
Summarize the considerations your team made when developing your promotional strategy (i.e., summarize the work you did in Part Three into a cohesive paragraph describing how you plan to promote the product you are marketing). Conclude your planning document by providing insights you gained from this assignment that you had not initially gleaned from the course material or textbook reading.

Geeks R Us has 5 locations all around the twin

Geeks R Us has 5 locations all around the twin

Geeks R Us has 5 locations all around the twin

Subject: Business / Management
Question
Geeks R Us has 5 locations all around the twin cities in Minnesota, where they provide geek support to households and small business. Input measures for each facility include weekly hours of operation, full-time equivalent staff, and cost of weekly supply. Output measures include average weekly profit, market share, and annual growth rate. Data for the input and output measures is shown below.

Input Measures

Output Measures

Location

Hours of Operation

FTE

Staff

Cost of

Supplies

Weekly

Profit

Market

Share

% Growth Rate

Northern

96

16

850

$4000

27%

7.8%

Western

110

22

1400

$4600

32%

8.5%

Southern

100

18

1200

$4400

35%

8.3%

Eastern

125

25

1500

$6500

30%

10%

Central

120

24

1600

$6000

28%

9%

Perform DEA for Western location. Show formulation at the bottom of page. Solve. Report optimal.
How much is the weekly profit of the composite? ______

What is the % market share of the composite? ________
What is the % growth rate of the composite? _______
How many hours of operation does the composite use? ________
How many FTE staff does the composite use? ______
How much supplies does the composite use? ______
Overall, the composite produces Western’s output with what percentage of Western’s resources? ___

HSA510 Assignment 1: Implications of Health Economic Concepts for Healthcare

HSA510 Assignment 1: Implications of Health Economic Concepts for Healthcare

HSA510 Assignment 1: Implications of Health Economic Concepts for Healthcare

Subject: General Questions / General General Questions
Question
Assignment 1: Implications of Health Economic Concepts for Healthcare

Due Week 4 and worth 200 points

Select at least five (5) economic concepts covered in the first four weeks’ readings, and discuss the primary manner in which these concepts impact the world of health care economics. Some examples of selected concepts are health demand and supply, elasticity, resources, health measures, and costs.

Write a four to six (4-6) page paper in which you:

Assess the value of healthcare professionals and decision makers understanding the discipline of health economics.
Defend or critique the importance of considering the complex nature of health and healthcare when examining the economic principles related to healthcare delivery.
Analyze the primary potential benefits of learning about health economics related to government involvement in healthcare economics, financing, and delivery.
Analyze the main potential benefits of learning about health economics related to private sector government involvement in healthcare economics, financing, and delivery.
Use at least five (5) current references. Three of these references must be from current peer-reviewed sources to support and substantiate your comments and perspectives.
Your assignment must follow these formatting requirements:

Be typed, double spaced, using Times New Roman font (size 12), with one-inch margins on all sides; citations and references must follow APA or school-specific format. Check with your professor for any additional instructions.
Include a cover page containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The cover page and the reference page are not included in the required assignment page length.
The specific course learning outcomes associated with this assignment are:

Explain how selected economic principles apply to the health care market and the provisions of health care services.
Analyze the factors that are influencing the demand and supply of health care services in the U.S.
Assess current economic trends that influence the cost, quality, and access to care.
Use technology and information resources to research issues in health economics.
Write clearly and concisely about health economics using proper writing mechanics.

 

EC441 – In the long run, output per person

EC441 – In the long run, output per person

EC441 – In the long run, output per person

Subject: Economics / General Economics
Question
EC441: Problem Set 5
Multiple-choice questions
The next four questions concern the Malthusian model. Suppose that the productivity of land
increases so for a given level of labor, output increases. Answer the following questions about the
effect on the economy relative to the initial (pre-change) steady state:

1. In the long run, output per person will be
A) Greater
B) Lower
C) No change
D) Ambiguous

2. In the long run, population will be
A) Greater
B) Lower
C) No change
D) Ambiguous

3. In the long run, total (aggregate) output will be
A) Greater
B) Lower
C) No change
D) Ambiguous

4. In the long run, the death rate (at the new steady state) will be
A) Greater
B) Lower
C) No change
D) Ambiguous
5. Suppose that in the Solow model the long run capital per capita is 5. Suppose that the current
capital per capita is 2. Then current savings
A) Equals depreciation plus population growth
B) Is greater than depreciation plus population growth
C) Is greater than depreciation plus population growth
1 D) Cannot say with numbers provided

6. Suppose that the world is a collection of countries each following the Solow model with the
same fundamentals (production function, population growth, depreciation), but different levels
of capital per worker. Which of the following should happen:
A) The poor countries should grow faster than the rich
B) The rich countries should grow faster than the poor
C) All countries grow at the same rate
D) There is no growth in any country

The next four questions concern the Solow model. Suppose the government discourages savings
by taxing capital and using the money to subsidize consumption. Think of this as a decline in
the savings rate. Answer the following questions about the effect on the economy relative to the
initial (pre-change) steady state:

7. In the long run, output per person will be
A) Greater
B) Lower
C) No change
D) Ambiguous (cannot sign the change for certain)

8. Compared to the original steady state, consumption per person in the new long-run steady state
will be
A) Greater
B) Lower
C) No change
D) Ambiguous (cannot sign the change for certain)

9. Along the transition to the new steady state, output per person will be:
A) Increasing
B) Decreasing
C) Constant
D) Ambiguous (cannot sign the change for certain)

10. In the new long-run steady state, the growth rate of output per capita compared to the original
steady state will be:
A) Greater
B) Lower
C) No change
D) Ambiguous (cannot sign the change for certain) 2 Short-answer questions

1. Consider the effect of giving aid to a developing economy. Let a be the amount of aid per person
given each year. “Total income available” for a country in per capita terms is then y + a, where y
is the amount of domestic output per capita. Start each economy from a steady state.
(a) Describe what happens in a Malthusian economy. In particular, assume that what determines
mortality and fertility is total income available. Describe what happens in the new steady
state to (a) per capita output produced, (b) per capita consumption (which is equal to per
capita total income available, as there is no saving in this model), and (c) population.

(b) Describe what happens in a Solow economy. In particular, assume that savings is an s
fraction of total income available (s is the saving rate). Describe what happens in the new
steady state to (a) per capita output produced, (b) per capita consumption, and (c) capital
per capita.

(c) Drawing on your answers from above, do you think that aid will help the poorest countries grow faster? Give some intuition of why growth may have different effects given the
underlying nature of the economy. 3

For masking open back windows, the display person

For masking open back windows, the display person

For masking open back windows, the display person

Subject: Business / Management
Question
QUESTION 1
For masking open back windows, the display person can use the following:
1.bamboo blinds
2.plants
3.ribbons
4.all of the above
1 points

QUESTION 2
Which of the following represents the most effective “sequencing” of fixtures for a typical department:
1.round rack, gondola, T-stand, quad rack
2.T-stand, quad rack, round rack, gondola
3.gondola, round rack, quad rack, T-stand
4.T-stand, gondola, round rack, quad rack
5.gondola, round rack, T-stand, quad rack
1 points

QUESTION 3
A display for a clearance sale would most likely include.
1.Umbrellas, outdoor furniture, tennis nets
2.Brooms, shopping bags, store boxes
3.Hearts, rosebuds, gold
4.Pastel colors, curtains, ribbons
5.Desks, chairs, files
1 points

QUESTION 4
Contrast uses light and movement to attract the viewer’s attention.
True
False
1 points

QUESTION 5
Store planners are designers that have many skills. They have experience asâ¦
1.visual merchandisers
2.architects
3.designers
4.colorists
5.All of the above
1 points

QUESTION 6
The value of an awning is
1.Visual appeal for the retailer
2.Reduction of glare
3.No value, awnings are becoming outdated
4.More than one of the above
1 points

QUESTION 7
What are the merchandise categories best suited for shadow box windows?
1.jewelry
2.scarves
3.neckties
4.all of the above
5.none of the above
1 points

QUESTION 8
There are the “bread-and-butter” fixtures
1.t-stands
2.stock-holders
3.rear walls
4.aisle tables
1 points

QUESTION 9
Merchandise should be tested under fluorescent lights to check the effect. Which of the following types of merchandise might be the most enhanced by fluorescent lights?
1.rugs
2.men’s sportswear
3.artists’ supplies
4.jewelry
5.women’s sweaters
1 points

QUESTION 10
Are lone accessories best displayed in a small closed display or a large open display?
1.Small closed display
2.Large open display
3.Either option works equally well.
1 points

QUESTION 11
The United States flag would best be used promoting what holiday?
1.The Fourth of July
2.Spring
3.Presidents Day
4.Back-to-School
5.Both a and c
1 points

QUESTION 12
Which of the following is NOT true of the fluorescent light as compared to other forms of light?
1.very efficient
2.inexpensive
3.light offers rich shadows and depth
4.all are true of fluorescent lights
1 points

QUESTION 13
There is a high probability that a display done in red and pink is for ______.
1.Spring
2.Christmas
3.Valentine’s Day
4.Easter
5.Back-to-school
1 points

QUESTION 14
What is a T-square?
1.A T shaped platform constructed of squares used for in store displays
2.A drafting table with perfect right angles
3.A ruler like object with a T head used to draw straight lines
4.A special hieroglyphic used in drafting
5.A standard traffic flow pattern
1 points

QUESTION 15
Proscenium is used to
1.accentuate the display setup behind it
2.show the pipes and lighting fixtures
3.distract the street side viewers
4.screen the theme used for the window
1 points

QUESTION 16
A T-wall:
1.forms the back of a closed window
2.always includes a platform
3.is designed as the back of all windows
4.is a two-sided partition
5.none of the above
1 points

QUESTION 17
Which of the following trade organizations is primarily concerned with issues related to store planning?
1.NADI
2.ISP
3.POPAI
4.DD&I
5.PAVE
1 points

QUESTION 18
When they are merchandised effectively, walls will become
1.invisible.
2.destinations.
3.traffic lanes.
4.graphic images.
5.signposts.
1 points

QUESTION 19
A visual merchandiser decides to use a large elephant cutout in conjunction will the showing of a delicate diamond necklace. He is hoping to capitalize on the principle of
1.Dominance
2.Proportion
3.Rhythm
4.Contrast
1 points

QUESTION 20
According to the text the best props in fashion shows are ones that the models can â¦
1.Interact with
2.Sit on
3.Blend in with
4.Carry with them
5.None of the above (It is not recommended to use props in fashion shows)
1 points

QUESTION 21
A type of display featuring hiking boots, a tent, sleeping bags, flannel shirts, and denim jeans would be best classified as:
1.one-item
2.line-of-goods
3.related merchandise
4.environmental
5.variety
1 points

QUESTION 22
A widow display shows a robber climbing through a window with an armful of stolen pants even though he is surrounded by expensive electronic devices. This display is making good use of
1.Nostalgia
2.Humor
3.Motion
4.Surprise and Shock
5.Both b and d
1 points

QUESTION 23
Which of the following is best used as accent lighting
1.MR16
2.Fluorescent
3.Incandescent
4.HID lamps
1 points

QUESTION 24
Which of the following is not a typical system material:
1.aluminum
2.wood
3.plastic
4.steel
5.all are typical system materials
1 points

QUESTION 25
A black dress is in the center of a window display surrounded by a white environment. This is an example of ______.
1.Lighting
2.Scale
3.Humor
4.Contrast
5.Surprise and Shock
1 points

QUESTION 26
Walls help to
1.move shoppers through the store.
2.support store image.
3.display merchandise.
4.define the store’s shopping spaces.
5.All of the above.
1 points

QUESTION 27
A costumer is a
1.freestanding fixture unit
2.a hanger set on top of an adjustable upright
3.unit which usually has a skirt bar
4.more than one of the above
1 points

QUESTION 28
A photo blow up that shows the product being used in its intended setting is called a ______ graphic.
1.Lifestyle
2.Slice
3.Croquis
4.Standard
5.Stock
1 points

QUESTION 29
A basic display work area should facilitate
1.Planning and designing
2.Detailing and preparation
3.Both a & b
4.None of the above
1 points

QUESTION 30
Which of the following is not an example of a “stock-holder:”
1.T-stand
2.quad rack
3.round rack
4.gondola
5.all are examples of “stock-holders”
1 points

QUESTION 31
As light bounces from one surface to another and then to our eyes, what is the effect on merchandise?
1.it has a neutral effect
2.it can effect the color of the merchandise
3.it usually turns the merchandise slightly blue
4.the light is refracted and thus has no effect on merchandise
1 points

QUESTION 32
Why do merchandisers use POP displays?
1.to encourage the consumer make a spontaneous decision
2.to allow the customer time to consider the purchase
3.to promote sale promotions
4.to motivate a new sale
1 points

QUESTION 33
The color lavender is an example of
1.An analogous color
2.A tint
3.A secondary color
4.A neutral color
1 points

QUESTION 34
A common difference between proscenia and masking is â¦
1.Proscenia is permanent and masking is usually semi permanent
2.Proscenia is semi permanent and masking is usually permanent
3.Proscenia and masking as just two names for the same thing
4.Proscenia primary use is in department stores and masking is mainly used in boutiques
5.Both a and d are common differences between proscenium and masking
1 points

QUESTION 35
Which type of lamp is considered “ideal” for jewelry displays:
1.MR16
2.G-lamp
3.PS bulb
4.PAR lamp
5.none of the above
1 points

QUESTION 36
What is the best device used to attract the viewers eye?
1.Props
2.Repetition
3.Color
4.Lighting
1 points

QUESTION 37
All of the following are vendor shops except
1.Coach
2.Gucci
3.Nordstrom’s
4.MAC
1 points

QUESTION 38
What is the major disadvantage of fluorescent lighting for a store?
1.the bulbs break easily, thus causing a hazard and possible lawsuit
2.it is available in only one form, blue white, and thus turns everything slightly blue
3.it tends to produce a flat, even, shadowless light that does not produce interesting textures
4.it generally flatters the people but not the merchandise
1 points

QUESTION 39
A merchandiser of cosmetics is most likely to want to use which kind of lighting
1.Incandescent
2.Florescent
3.High-pressure sodium
4.HID
1 points

QUESTION 40
When working with mannequins, which of the following is not true:
1.in order to dress a mannequin, it must first be taken apart
2.if a mannequin is to wear pants, probably one leg will need to be removed
3.if a mannequin has a butt-rod, an opening must be provided in the crotch or seam of the trousers to permit the rod to slide into the fitting
4.if a mannequin has a removable wig, it should be taken off before dressing
5.all are true