kinematics questions- A 6in diameter concrete cylinder is loaded with a compressive force of 113.1 kips (1000#)
Subject: Physics / General Physics
Question
Homework1. A 6in diameter concrete cylinder is loaded with a compressive force of 113.1 kips (1000#). Determine the stress in the cylinder
2. Determine the tensile stress in each segment of the bar shown. Segment AB has a square cross section 2in by 2in. Segment BC has a circular cross section with a diameter of 1.75in. The tensile load P = 75 kips.
3. Calculate the stress developed in the following members that are each subjected to an axial tensile load of 70 kN; a. Steel bar – 25mm by 50mm. b. 150mm diameter wood post. c. 25mm diameter steel tie rod.
4. A 32mm diameter bar is cut in a shear press. The force required to shear the bar is P = 300 kN. Determine the ultimate shear strength for this bar.
5. The allowable shear stress for a 7/8in diameter rod is 14,500psi. What is the maximum P shear force the rod can withstand?
6. Compute the force required to punch a 1in diameter hole through a ½ in thick plate. The ultimate shear strength got the material is 42,000 psi.
7. Why is strain dimensionless?
8. A 100ft long rod is suspended from one end. The diameter of the rod is 1in and the total elongation (deformation) is 0.80in. Calculate the Strain.
9. A short compression member with a 2in by 2in cross section and 8 in long is subjected to a 40,000# axial compressive load. As a result, the length of the member is shortened to 7.85in. Compute the strain in the member.
Save your time!
- Proper editing and formatting
- Free revision, title page, and bibliography
- Flexible prices and money-back guarantee
10. A steel rod 3/4in diameter and 25ft long is subjected to an axial tensile load of 15,000#. E=30,000,000 psi Compute; a. Stress b. Strain c. Total Elongation 11. An aluminum rod 25mm in diameter and 4m long is subjected to an axial tensile load of 65kN. E=70,000 MPa Compute; a. Stress b. Strain c. Total Elongation
