Data Case As a new analyst for a large brokerage firm, you are anxious to demonstrate the skills you learned in your MBA program and prove that you are worth your attractive salary. Your first assignment is to analyze the stock of the General Electric Corporation. Your boss recommends determining prices based on both the dividend-discount model and discounted free cash flow valuation methods. GE uses a cost of equity of 10.5% and an after-tax weighted average cost of capital of 7.5%. The expected return on new investments is 12%. However, you are a little concerned because your finance professor has told you that these two methods can result in widely differing estimates when applied to real data. You are really hoping that the two methods will reach similar prices. Good luck with that! 1. Go to Yahoo! Finance (http://finance.yahoo.com) and enter the symbol for General Electric (GE). From the main page for GE, gather the following information and enter it onto a spreadsheet: a. The current stock price (last trade) at the top of the page. b. The current dividend amount, which is in the bottom-right cell in the same box as the stock price. 2. Next, click “Key Statistics” from the left side of the page. From the Key Statistics page, gather the following information and enter it on the same spreadsheet: a. The number of shares of stock outstanding. b. The Payout ratio. 3. Next, click “Analyst Estimates” from the left side of the page. From the Analyst Estimates page, find the expected growth rate for the next five years and enter it onto your spreadsheet. It will be near the very bottom of the page. 4. Next, click “Income Statement” near the bottom of the menu on the left. Place the cursor in the middle of the income statements and right-click. Select “Export to Microsoft Excel.” Copy and paste the entire three years of income statements into a new worksheet in your existing Excel file.Repeat this process for both the...
Category: Uncategorized
A firm that uses LIFO accounting for inventory in times?
A firm that uses LIFO accounting for inventory in times?
A firm that uses LIFO accounting for inventory in times?
Statistics homework
Statistics homework Questions at end of chapter 2: #3, 4, 6, 7, 9 Questions at end of chapter 3: #1, 8 Required Texts and Materials: 1. ​Salkind, N. J. (2013). Statistics for people who think they hate statistics. (3rd ed.), Thousand Oaks, CA: Sage Publications. 2. ​Microsoft Excel 2010 edition.
Data Mining
Data Mining The Topic is data mining The Research Report synthesises the research relevant to the ethical issue and organises recommendations into an appropriately-structured research report . The report will be organised into an introduction, literature review, discussion and conclusion and will effectively reference at least eight (8) outside sources. The introduction will identify, define and analyse key concepts related to the ethical issue and argue for its significance in the current Australian or global context. The literature review will discuss the contributions of the relevant research and current practices, providing a thorough but concise understanding of the current perspectives on the issue. The discussion will elaborate on these views and review any relevant policies and practices before concluding with a well-argued recommendation. (1800 words 1. Topics & Objectives: Synthesising resources, integrating evidence and reporting information To prepare students for success on the Research Report, the following topic areas and skills need to be addressed: 1. Reading for key information (Brick Chapter 8) a. Implement different reading strategies according to the reading purpose (e.g. skimming for key points, outlining and note-taking) b. Critically read and evaluate texts c. Identify generalisations and specific details which support them in a text (Brick Chapter 14) d. Interpret charts, figures and graphs in conjunction with text commentary. e. Identify unknown vocabulary; define and interpret usage within discipline-specific contexts. 2. Developing and expressing voice (Brick Chapters 10 & 12) a. Identify the purpose and audience of an essay and how these variables affect how voices are used b. Integrate own voice and voice of others appropriately using appropriate reporting verbs c. Introduce outside voices using a variety of direct, indirect and external voice patterns. (Brick Chapter 9) 3. Referencing and citing sources (Brick...
What is global business
What is global business ASSESSMENT 2: Part A: COMPREHENSIVE RESEARCH ESSAY PLAN WITH JOURNAL ARTICLE SUMMARIES Weight: 10% Due: Week 3 (Odd Week Tutes) Week 4 (Even Week Tutes) Word Count: 600 words Overall Requirements: Students are strongly advised to read the notes on essay writing on the subject web page prior to commencing work on this assessment task. The assignment is to be presented as a written comprehensive plan for an essay supported by your review of three relevant articles. (The essay itself requires at least a review of the relevant chapter from the prescribed text and use of at least three refereed management journal articles relating to the set topic. The use of additional references is encouraged. See Recommended References in the subject guide.) Topics will be allocated in the first tutorial of the semester by your tutor. The topic assigned to you will be from the topics listed on Blackboard. In-text referencing showing where you will be using the textbook and article material PLUS a reference list for the essay plan you are preparing MUST be included at the end of the plan. NOTE: „Wikipedia?, „answers.com? and other non-peer reviewed online sources of information are not acceptable references. The Harvard system must be used for the in-text references and the reference list. Essays must be submitted electronically as a Microsoft Word document file via the Blackboard Assignment Submission process. The file name for your essay must be in the format of Given Name_Family Name_Student ID number_Assignment. For example Alan_McWilliams_s1234567_Essay Essays submitted with any other file name format will not be accepted. Requirements for Plan: The comprehensive essay plan should be submitted in “dot point” form with major paragraph themes and sub-themes of the essay clearly identified (e.g. Introduction, Background, Conclusion etc.) and indicating, using the Harvard Referencing system, where it would be appropriate to refer to each of your reviewed articles. The plan section...
There are two problems in the attached file…
There are two problems in the attached file…
This is an unformatted preview. Please download the attached document for the original format. 2. Classical Gases Our goal in this section is to use the techniques of statistical mechanics to describe the dynamics of the simplest system: a gas. This means a bunch of particles, ?ying around in a box. Although much of the last section was formulated in the language of quantum mechanics, here we will revert back to classical mechanics. Nonetheless, a recurrent theme will be that the quantum world is never far behind: we’ll see several puzzles, both theoretical and experimental, which can only truly be resolved by turning on . 2.1 The Classical Partition Function For most of this section we will work in the canonical ensemble. We start by reformulating the idea of a partition function in classical mechanics. We’ll consider a simple system – a single particle of mass m moving in three dimensions in a potential V (q). The classical Hamiltonian of the system3 is the sum of kinetic and potential energy, p2 + V (q) 2m We earlier de?ned the partition function (1.21) to be the sum over all quantum states of the system. Here we want to do something similar. In classical mechanics, the state of a system is determined by a point in phase space. We must specify both the position and momentum of each of the particles — only then do we have enough information to ?gure out what the system will do for all times in the future. This motivates the de?nition of the partition function for a single classical particle as the integration over phase space, 1 (2.1) Z1 = 3 d3 qd3 p e??H(p,q) h The only slightly odd thing is the factor of 1/h3 that sits out front. It is a quantity that needs to be there simply on dimensional grounds: Z should be dimensionless so h must have dimension (length × momentum) or, equivalently, Joules-seconds (Js). The actual value of h won’t matter for any physical observable, like heat capacity, because we always take log Z and then di?erentiate. Despite this, there is actually a correct value for h: it is Planck’s constant, h = 2? ? 6.6 × 10?34 Js. H= It is very strange to see Planck’s constant in a formula that is supposed to be classical. What’s it doing there? In fact, it is a vestigial object, like the male nipple. It is redundant, serving only as a reminder of where we came from. And the classical world came from the quantum. 3 If you haven’t taken the Classical Dynamics course, you should think of the Hamiltonian as the energy of the system expressed in terms of the position and momentum of the particle. More details can be found in the lecture notes at: http://www.damtp.cam.ac.uk/user/tong/dynamics.html – 31 – 2.1.1 From Quantum to Classical It is possible to derive the classical partition function (2.1) directly from the quantum partition function (1.21) without resorting to hand-waving. It will also show us why the factor of 1/h sits outside the partition function. The derivation is a little tedious, but worth seeing. (Similar techniques are useful in later courses when you ?rst meet the path integral). To make life easier, let’s consider a single particle moving in one spatial dimension. It has position operator q , momentum operator p and Hamiltonian, ˆ ˆ p2 ˆ ˆ H= + V (ˆ) q 2m If |n is the energy eigenstate with energy En , the quantum partition function is ˆ e??En = Z1 = n n|e?? H |n n (2.2) In what follows, we’ll make liberal use of the fact that we can insert the identity operator anywhere in this expression. Identity operators can be constructed by summing over any complete basis of states. We’ll need two such constructions, using the position eigenvectors |q and the momentum eigenvectors |p , dq |q q| 1= , dq |p p| 1= We start by inserting two copies of the identity built from position eigenstates, Z1 = ˆ n ˆ dqdq ? q|e?? H |q ? = But now we can replace q ? |q = ?(q ? ? q), to get n dq ? |q ? q ? |n dq |q q|e?? H n| n q ? |n n|q |n n| with the identity matrix and use the fact that Z1 = ˆ dq q|e?? H |q (2.3) We see that the result is to replace the sum over energy eigenstates in (2.2) with a sum (or integral) over position eigenstates in (2.3). If you wanted, you could play the same game and get the sum over any complete basis of eigenstates of your choosing. As an aside, this means that we can write the partition function in a basis independent fashion as ˆ Z1 = Tr e?? H – 32 – So far, our manipulations could have been done for any quantum system. Now we want to use the fact that we are taking the classical limit. This comes about when we try ˆ to factorize e?? H into a momentum term and a position term. The trouble is that this isn’t always possible when there are matrices (or operators) in the exponent. Recall that, ˆ ˆ ˆ 1 ˆ ˆ ˆ eA eB = eA+B+ 2 [A,B]+... For us [ˆ, p] = i . This means that if we’re willing to neglect terms of order q ˆ is the meaning of taking the classical limit — then we can write ˆ — which 2 ˆ q e?? H = e?? p /2m e??V (ˆ) + O( ) We can now start to replace some of the operators in the exponent, like V (ˆ), with q functions V (q). (The notational di?erence is subtle, but important, in the expressions below!), 2 Z1 = ˆ q dq q|e?? p /2m e??V (ˆ) |q = ˆ dq e??V (q) q|e?? p /2m |q = ˆ dqdpdp?e??V (q) q|p p|e?? p /2m |p? p?|q = 2 2 1 2? dqdp e??H(p,q) where, in the ?nal line, we’ve used the identity q|p = ? 1 eipq/ 2? This completes the derivation. 2.2 Ideal Gas The ?rst classical gas that we’ll consider consists of N particles trapped inside a box of volume V . The gas is “ideal”. This simply means that the particles do not interact with each other. For now, we’ll also assume that the particles have no internal structure, so no rotational or vibrational degrees of freedom. This situation is usually referred to as the monatomic ideal gas. The Hamiltonian for each particle is simply the kinetic energy, H= p2 2m – 33 – And the partition function for a single particle is Z1 (V, T ) = 1 (2? )3 d3 qd3 p e??p 2 /2m (2.4) The integral over position is now trivial and gives d3 q = V , the volume of the box. The integral over momentum is also straightforward since it factorizes into separate integrals over px , py and pz , each of which is a Gaussian of the form, 2 dx e?ax = ? a So we have Z1 = V mkB T 2? 2 3/2 We’ll meet the combination of factors in the brackets a lot in what follows, so it is useful to give it a name. We’ll write Z1 = V ?3 (2.5) The quantity ? goes by the name of the thermal de Broglie wavelength, ?= 2? 2 mkB T (2.6) ? has the dimensions of length. We will see later that you can think of ? as something like the average de Broglie wavelength of a particle at temperature T . Notice that it is a quantum object – it has an sitting in it – so we expect that it will drop out of any genuinely classical quantity that we compute. The partition function itself (2.5) is counting the number of these thermal wavelengths that we can ?t into volume V . Z1 is the partition function for a single particle. We have N, non-interacting, particles in the box so the partition function of the whole system is N Z(N, V, T ) = Z1 = VN ?3N (2.7) (Full disclosure: there’s a slightly subtle point that we’re brushing under the carpet here and this equation isn’t quite right. This won’t a?ect our immediate discussion and we’ll explain the issue in more detail in Section 2.2.3.) – 34 – Figure 8: Deviations from ideal gas law at sensible densities Figure 9: Deviations from ideal gas law at extreme densities Armed with the partition function Z, we can happily calculate anything that we like. Let’s start with the pressure, which can be extracted from the partition function by ?rst computing the free energy (1.36) and then using (1.35). We have ?F ?V ? = (kB T log Z) ?V NkB T (2.8) = V This equation is an old friend – it is the ideal gas law, pV = NkB T , that we all met in kindergarten. Notice that the thermal wavelength ? has indeed disappeared from the discussion as expected. Equations of this form, which link pressure, volume and temperature, are called equations of state. We will meet many throughout this course. p=? As the plots above show4 , the ideal gas law is an extremely good description of gases at low densities. Gases deviate from this ideal behaviour as the densities increase and the interactions between atoms becomes important. We will see how this comes about from the viewpoint of microscopic forces in Section 2.5. It is worth pointing out that this derivation should calm any lingering fears that you had about the de?nition of temperature given in (1.7). The object that we call T really does coincide with the familiar notion of temperature applied to gases. But the key property of the temperature is that if two systems are in equilibrium then they have the same T . That’s enough to ensure that equation (1.7) is the right de?nition of temperature for all systems because we can always put any system in equilibrium with an ideal gas. 4 Both ?gures are taken from the web textbook “General Chemistry” and credited to John Hutchin- son. – 35 – 2.2.1 Equipartition of Energy The partition function (2.7) has more in store for us. We can compute the average energy of the ideal gas, E=? ? 3 log Z = NkB T ?? 2 (2.9) There’s an important, general lesson lurking in this formula. To highlight this, it is worth repeating our analysis for an ideal gas in arbitrary number of spatial dimensions, D. A simple generalization of the calculations above shows that Z= VN ?DN ? E= D NkB T 2 Each particle has D degrees of freedom (because it can move in one of D spatial directions). And each particle contributes 1 DkB T towards the average energy. This 2 is a general rule of thumb, which holds for all classical systems: the average energy of each free degree of freedom in a system at temperature T is 1 kB T . This is called the 2 equipartition of energy. As stated, it holds only for degrees of freedom in the absence of a potential. (There is a modi?ed version if you include a potential). Moreover, it holds only for classical systems or quantum systems at suitably high temperatures. We can use the result above to see why the thermal de Broglie wavelength (2.6) can be thought of as roughly equal to the average de Broglie wavelength of a particle. Equating the average energy (2.9) to the kinetic energy E = p2 /2m tells us that the ? average (root mean square) momentum carried by each particle is p ? mkB T . In quantum mechanics, the de Broglie wavelength of a particle is ?dB = h/p, which (up to numerical factors of 2 and ?) agrees with our formula (2.6). Finally, returning to the reality of d = 3 dimensions, we can compute the heat capacity for a monatomic ideal gas. It is CV = ?E ?T V 3 = NkB 2 (2.10) 2.2.2 The Sociological Meaning of Boltzmann’s Constant We introduced Boltzmann’s constant kB in our original the de?nition of entropy (1.2). It has the value, kB = 1.381 × 10?23 JK ?1 In some sense, there is no deep physical meaning to Boltzmann’s constant. It is merely a conversion factor that allows us to go between temperature and energy, as re?ected – 36 – in (1.7). It is necessary to include it in the equations only for historical reasons: our ancestors didn’t realise that temperature and energy were closely related and measured them in di?erent units. Nonetheless, we could ask why does kB have the value above? It doesn’t seem a particularly natural number. The reason is that both the units of temperature (Kelvin) and energy (Joule) are picked to re?ect the conditions of human life. In the everyday world around us, measurements of temperature and energy involve fairly ordinary numbers: room temperature is roughly 300 K; the energy required to lift an apple back up to the top of the tree is a few Joules. Similarly, in an everyday setting, all the measurable quantities — p, V and T — in the ideal gas equation are fairly normal numbers when measured in SI units. The only way this can be true is if the combination NkB is a fairly ordinary number, of order one. In other words the number of atoms must be huge, N ? 1023 (2.11) This then is the real meaning of the value of Boltzmann’s constant: atoms are small. It’s worth stressing this point. Atoms aren’t just small: they’re really really small. 1023 is an astonishingly large number. The number of grains of sand in all the beaches in the world is around 1018 . The number of stars in our galaxy is about 1011 . The number of stars in the entire visible Universe is probably around 1022 . And yet the number of water molecules in a cup of tea is more than 1023 . Chemist Notation While we’re talking about the size of atoms, it is probably worth reminding you of the notation used by chemists. They too want to work with numbers of order one. For this reason, they de?ne a mole to be the number of atoms in one gram of Hydrogen. (Actually, it is the number of atoms in 12 grams of Carbon-12, but this is roughly the same thing). The mass of Hydrogen is 1.6 × 10?27 Kg, so the number of atoms in a mole is Avogadro’s number, NA ? 6 × 1023 The number of moles in our gas is then n = N/NA and the ideal gas law can be written as pV = nRT where R = NA kB is the called the Universal gas constant. Its value is a nice sensible number with no silly power in the exponent: R ? 8 JK ?1 mol?1 . – 37 – 2.2.3 Entropy and Gibbs’s Paradox “It has always been believed that Gibbs’s paradox embodied profound thought. That it was intimately linked up with something so important and entirely new could hardly have been foreseen.” Erwin Schr¨dinger o We said earlier that the formula for the partition function (2.7) isn’t quite right. What did we miss? We actually missed a subtle point from quantum mechanics: quantum particles are indistinguishable. If we take two identical atoms and swap their positions, this doesn’t give us a new state of the system – it is the same state that we had before. (Up to a sign that depends on whether the atoms are bosons or fermions – we’ll discuss this aspect in more detail in Sections 3.5 and 3.6). However, we haven’t N taken this into account – we wrote the expression Z = Z1 which would be true if all the N particles in the were distinguishable — for example, if each of the particles were of a di?erent type. But this naive partition function overcounts the number of states in the system when we’re dealing with indistinguishable particles. It is a simple matter to write down the partition function for N indistinguishable particles. We simply need to divide by the number of ways to permute the particles. In other words, for the ideal gas the partition function is 1 N VN Zideal (N, V, T ) = Z = (2.12) N! 1 N!?3N The extra factor of N! doesn’t change the calculations of pressure or energy since, for each, we had to di?erentiate log Z and any overall factor drops out. However, it does change the entropy since this is given by, ? (kB T log Zideal ) ?T which includes a factor of log Z without any derivative. Of course, since the entropy is counting the number of underlying microstates, we would expect it to know about whether particles are distinguishable or indistinguishable. Using the correct partition function (2.12) and Stirling’s formula, the entropy of an ideal gas is given by, S= S = NkB log V N?3 + 5 2 (2.13) This result is known as the Sackur-Tetrode equation. Notice that not only is the entropy sensitive to the indistinguishability of the particles, but it also depends on ?. However, the entropy is not directly measurable classically. We can only measure entropy di?erences by the integrating the heat capacity as in (1.10). – 38 – The necessity of adding an extra factor of N! was noticed before the advent of quantum mechanics by Gibbs. He was motivated by the change in entropy of mixing between two gases. Suppose that we have two di?erent gases, say red and blue. Each has the same number of particles N and sits in a volume V, separated by a partition. When the partition is removed the gases mix and we expect the entropy to increase. But if the gases are of the same type, removing the partition shouldn’t change the macroscopic state of the gas. So why should the entropy increase? This was referred to as the Gibb’s paradox. Including the factor of N! in the partition function ensures that the entropy does not increase when identical atoms are mixed. 2.2.4 The Ideal Gas in the Grand Canonical Ensemble It is worth brie?y looking at the ideal gas in the grand canonical ensemble. Recall that in such an ensemble, the gas is free to exchange both energy and particles with the outside reservoir. You could think of the system as some ?xed subvolume inside a much larger gas. If there are no walls to de?ne this subvolume then particles, and hence energy, can happily move in and out. We can ask how many particles will, on average, be inside this volume and what ?uctuations in particle number will occur. More importantly, we can also start to gain some intuition for this strange quantity called the chemical potential, µ. The grand partition function (1.39) for the ideal gas is ? Zideal (µ, V, T ) = e?µN Zideal (N, V, T ) = exp N =0 e?µ V ?3 From this we can determine the average particle number, N= 1 ? e?µ V log Z = ? ?µ ?3 Which, rearranging, gives µ = kB T log ?3 N V (2.14) If ?3 < V /N then the chemical potential is negative. Recall that ? is roughly the average de Broglie wavelength of each particle, while V /N is the average volume taken up by each particle. But whenever the de Broglie wavelength of particles becomes comparable to the inter-particle separation, then quantum e?ects become important. In other words, to trust our classical calculation of the ideal gas, we must have ?3 ? V /N and, correspondingly, µ < 0. – 39 – At ?rst sight, it is slightly strange that µ is negative. When we introduced µ in Section 1.4.1, we said that it should be thought of as the energy cost of adding an extra particle to the system. Surely that energy should be positive! To see why this isn’t the case, we should look more closely at the de?nition. From the energy variation (1.38), we have µ= ?E ?N S,V So the chemical potential should be thought of as the energy cost of adding an extra particle at ?xed entropy and volume. But adding a particle will give more ways to share the energy around and so increase the entropy. If we insist > 0. This can occur if we have a suitably strong repulsive interaction between particles so that there’s a large energy cost associated to throwing in one extra. We also have µ > 0 for fermion systems at low temperatures as we will see in Section 3.6. We can also compute the ?uctuation in the particle number, ?N 2 = 1 ?2 log Zideal = N ? 2 ?µ2 ? As promised in Section 1.4.1, the relative ?uctuations ?N/ N = 1/ N are vanishingly small in the thermodynamic N ? ? limit. Finally, it is very easy to compute the equation of state in the grand canonical ensemble because (1.45) and (1.48) tell us that pV = kB T log Z = kB T e?µ V = kB T N ?3 (2.15) which gives us back the ideal gas law. 2.3 Maxwell Distribution Our discussion above focusses on understanding macroscopic properties of the gas such as pressure or heat capacity. But we can also use the methods of statistical mechanics to get a better handle on the microscopic properties of the gas. Like everything else, the information is hidden in the partition function. Let’s return to the form of the single particle partition function (2.4) before we do the integrals. We’ll still do the – 40 – Figure 10: Maxwell distribution for Noble gases: He, N e, Ar and Xe. trivial spatial integral d3 q = V , but we’ll hold o? on the momentum integral and instead change variables from momentum to velocity, p = mv. Then the single particle partition function is Z1 = m3 V (2? )3 d3 v e??mv 2 /2 = 4?m3 V (2? )3 dv v 2 e??mv 2 /2 We can compare this to the original de?nition of the partition function: the sum over states of the probability of that state. But here too, the partition function is written as a sum, now over speeds. The integrand must therefore have the interpretation as the probability distribution over speeds. The probability that the atom has speed between v and v + dv is f (v)dv = N v 2 e?mv 2 /2k BT dv (2.16) where the normalization factor N can be determined by insisting that probabilities ? sum to one, 0 f (v) dv = 1, which gives N = 4? m 2?kB T 3/2 This is the Maxwell distribution. It is sometimes called the Maxwell-Boltzmann distribution. Figure 10 shows this distribution for a variety of gases with di?erent masses at the same temperature, from the slow heavy Xenon (purple) to light, fast Helium (blue). We can use it to determine various average properties of the speeds of atoms – 41 – in a gas. For example, the mean square speed is ? v2 = dv v 2 f (v) = 0 3kB T m This is in agreement with the equipartition of energy: the average kinetic energy of the 3 gas is E = 1 m v 2 = 2 kB T . 2 Maxwell’s Argument The above derivation tells us the distribution of velocities in a non-interacting gas of particles. Remarkably, the Maxwell distribution also holds in the presence of any interactions. In fact, Maxwell’s original derivation of the distribution makes no reference to any properties of the gas. It is very slick! Let’s ?rst think about the distribution of velocities in the x direction; we’ll call this distribution ?(vx ). Rotational symmetry means that we must have the same distribution of velocities in both the y and z directions. However, rotational invariance also requires that the full distribution can’t depend on the direction of the velocity; it 2 2 2 can only depend on the speed v = vx + vy + vz . This means that we need to ?nd functions F (v) and ?(vx ) such that F (v) dvxdvy dvz = ?(vx )?(vy )?(vz ) dvx dvy dvz It doesn’t look as if we possibly have enough information to solve this equation for both F and ?. But, remarkably, there is only one solution. The only function which satis?es this equation is 2 ?(vx ) = Ae?Bvx for some constants A and B. Thus the distribution over speeds must be 2 F (v) dvxdvy dvz = 4?v 2 F (v) dv = 4?A3 v 2 e?Bv dv We see that the functional form of the distribution arises from rotational invariance alone. To determine the coe?cient B = m/2kB T we need the more elaborate techniques of statistical mechanics that we saw above. (In fact, one can derive it just from equipartition of energy). 2.3.1 A History of Kinetic Theory The name kinetic theory refers to the understanding the properties of gases through their underlying atomic constituents. The discussion given above barely scratches the surface of this important subject. – 42 – Kinetic theory traces its origin to the work of Daniel Bernoulli in 1738. He was the ?rst to argue that the phenomenon that we call pressure is due to the constant bombardment of tiny atoms. His calculation is straightforward. Consider a cubic box with sides of length L. Suppose that an atom travelling with momentum vx in the x direction bounces elastically o? a wall so that it returns with velocity ?vx . The particle experiences a change in momentum is ?px = 2mvx . Since the particle is trapped in a box, it will next hit the wall at a time ?t = 2L/vx later. This means that the force on the wall due to this atom is F = 2 ?px mvx = ?t L Summing over all the atoms which hit the wall, the force is F = 2 Nm vx L 2 where vx is the average velocity in the x-direction. Using the same argument as we 2 gave in Maxwell’s derivation above, we must have vx = v 2 /3. Thus F = Nm v 2 /3L and the pressure, which is force per area, is given be p= Nm v 2 Nm v 2 = 3L3 3V If this equation is compared to the ideal gas law (which, at the time, had only experimental basis) one concludes that the phenomenon of temperature must arise from the kinetic energy of the gas. Or, more precisely, one ?nds the equipartition result that we 1 3 derived previously: 2 m v 2 = 2 kB T . After Bernoulli’s pioneering work, kinetic theory languished. No one really knew what to do with his observation nor how to test the underlying atomic hypothesis. Over the next century, Bernouilli’s result was independently rediscovered by a number of people, all of whom were ignored by the scienti?c community. One of the more interesting attempts was by John Waterson, a Scottish engineer and naval instructor working for the East India Company in Bombay. Waterson was considered a crackpot. His 1843 paper was rejected by the Royal Society as “nothing but nonsense” and he wrote up his results in a self-published book with the wonderfully crackpot title “Thoughts on Mental Functions”. The results of Bernouilli and Waterson ?nally became accepted only after they were re-rediscovered by more established scientists, most notably Rudolph Clausius who, in 1857, extended these ideas to rotating and vibrating molecules. Soon afterwards, in – 43 – 1859, Maxwell gave the derivation of the distribution of velocities that we saw above. This is often cited as the ?rst statistical law of physics. But Maxwell was able to take things further. He used kinetic theory to derive the ?rst genuinely new prediction of the atomic hypothesis: that the viscosity of a gas is independent of its density. Maxwell himself wrote, ”Such a consequence of the mathematical theory is very startling and the only experiment I have met with on the subject does not seem to con?rm it.” Maxwell decided to rectify the situation. With help from his wife, he spent several years constructing an experimental apparatus in his attic which was capable of providing the ?rst accurate measurements of viscosity of gases5 . His surprising theoretical prediction was con?rmed by his own experiment. There are many further developments in kinetic theory which we will not cover in this course. Perhaps the most important is the Boltzmann equation. This describes the evolution of a particle’s probability distribution in position and momentum space as it collides with other particles. Stationary, unchanging, solutions bring you back to the Maxwell-Boltzmann distribution, but the equation also provides a framework to go beyond the equilibrium description of a gas. You can read about this in the books by Reif, Kardar or many many other places. 2.4 Diatomic Gas “I must now say something about these internal motions, because the greatest di?culty which the kinetic theory of gases has yet encountered belongs to this part of the subject”. James Clerk Maxwell, 1875 Consider a molecule that consists of two atoms in a bound state. We’ll construct a very simple physicist’s model of this molecule: two masses attached to a spring. As well as the translational degrees of freedom, there are two further ways in which the molecule can move • Rotation: the molecule can rotate rigidly about the two axes perpendicular to the axis of symmetry, with moment of inertia I. (For now, we will neglect the 5 You can see the original apparatus down the road in the corridor of the Cavendish lab. Or, if you don’t fancy the walk, you can simply click here: http://www-outreach.phy.cam.ac.uk/camphy/museum/area1/exhibit1.htm – 44 – rotation about the axis of symmetry. It has very low moment of inertia which will ultimately mean that it is unimportant). • Vibration: the molecule can oscillate along the axis of symmetry We’ll work under the assumption that the rotation and vibration modes are independent. In this case, the partition function for a single molecule factorises into the product of the translation partition function Ztrans that we have already calculated (2.5) and the rotational and vibrational contributions, Z1 = Ztrans Zrot Zvib We will now deal with Zrot and Zvib in turn. Rotation The Lagrangian for the rotational degrees of freedom is6 1 ? ? Lrot = I(?2 + sin2 ??2 ) 2 (2.17) The conjugate momenta are therefore p? = ?Lrot . . . . . . . . . . .Additional Requirements Min Pages: 1 Level of Detail: Show all work Other Requirements: Problem 1: Make sure that E/kB is labeled in your plot. The plot should be drawn based on the notes given (a), (b) and (c) in the problem. Also, make sure that detailed explanations are given in all problems!!!
Please help me with the attached question….Discussion 7
Please help me with the attached question….Discussion 7
Please help me with the attached question....Discussion 7 Discussion 7.docx Download Attachment This is an unformatted preview. Please download the attached document for the original format. Discussion 7 • Review the case study you developed for this week’s Application Assignment and analyze its key points. Applicaton Topics: Obesity, Celiac Disease, Crohn's Disease, Hepatitis, Cirrhosis, or Viral Gastroenteritis, Gastroparesis • Develop a summary of your case study. Include the following in the summary: 1) The type and severity of the chosen disease. 2) The risk factors(modifiable and non-modifiable) for developing the disease (genetic, environmental, lifestyle, etc.) 3) The management the condition (i.e., frequent testing, alternative health approaches, significant decisions) 4) The level of success derived from treatments and therapies Post a summary of your findings. 250 word paragraph. Include reference page and in-text citation.
help with geomorphology lab
Hi I need help with my geomorphology lab Attachment Preview: 376_lab1_sed_properties-F14.pdf Download Attachment This is an unformatted preview. Please download the attached document for the original format. GEOG 376: Laboratory 1 Fall 2014 University of Victoria -? Department of Geography GEOG376 PROCESS GEOMORPHOLOGY Instructor: Dr. Dan H. Shugar LABORATORY 1: GEOTECHNICAL PROPERTIES OF SEDIMENTS Introduction: Sedimentary deposits and soils are known as three-?phase composite materials that consist of a matrix of solid particles and void spaces filled with water and/or air. The matrix consists of a range of grain sizes (‘particle-?size distribution’) that is classified broadly as fine-?grained (clay and silt) and coarse-? grained (sand and gravel) deposits. Within the matrix are essentially two main sources of strength: i) interparticle friction and ii) cohesion. Frictional resistance results from surface-?to-?surface friction, interlocking of particles, packing, and any rearrangement (e.g., compaction or expansion/dilation) that occurs during applied forces (shearing stress, ?). Cohesive force results from: chemical cementation between particles, electrostatic and electromagnetic forces, and moisture content. Imagine these forces at work between billions of grains in any sedimentary deposit. Combined, these forces represent the shear strength (S) of a deposit. See pages 101-?109 in the Ritter et al. text also. In nature, soils and sediments often experience changes in both applied shearing stresses and internal shear strength. Often the outcome is for the deposit to deform, or change shape (known as strain). The nature of this deformation depends on how the forces are transferred through the deposit and how resistant the substance is to these applied forces. Rheology is the geotechnical study of stress-? strain responses, or how substances deform in response to applied shear stresses. Responses can include fracture like a brittle solid (e.g., rock), plastic deformation (e.g., ice), or viscous liquid flow (e.g., mudflow). Moisture and air trapped within deposits can affect rheological responses by exerting pressure within the matrix. Negative (suction) pressures typically enhance shear strength while positive pressures reduce shear strength by reducing interparticle friction. For example, if shear force is applied faster than the air and/or water can escape, the pore air or water pressure increases, causing effective or interparticle forces to decrease, which weakens the soil. In soils with appreciable water content, when external shear forces equals the internal pore pressure, the soil can liquefy and flow. Figure 1 shows the effect of shearing stress on sand particles and resulting change in particle alignment and packing density1. As shearing stress is applied, resistance of the sediment (shear strength) is a function of interparticle friction and packing arrangement. As particles rotate over one another, the packing density changes, which causes sediment volume to increase (dilation) or decrease (compression) depending on particle arrangement. For example, in stage (1) a large void in the matrix is maintained by particle interlocking; (2) counterclockwise strain and particle rearrangement causes the void to collapse; (3) continued shear causes more voids to form or enlargen; (4) voids may collapse as stress direction changes. Imagine how this may play out during an earthquake or landslide, for example. 1 Modified from Youd (1977) as in NASA Educational Brief EB-2002-02-53-MSFC 1 of 10 GEOG 376: Laboratory 1 Fall 2014 5 Purpose & objectives: buildings, managing undeveloped land, and handling The purpose of granular is to conduct experiments to test the shear strength of soils. The lab powdered and this lab materials in chemical, agricultural, and other industries. involves two tests used by geomorphologists and geotechnical engineers to characterize the rheology of sediments and their potential for of ass wasting. soil The weightless environment m space allows mechanics experiments at low effective stresses with Notes: very low confining pressures to proceed slowly for detailed tstudy. Specimen weight is no longer a factor, ust submit individual lab reports. • For his lab, please work in groups but each of you m and the stressll questions in a lab report that includes any results components (tables, figures, plots, etc.). • Answer a across the specimen is constant. This yields measurements tthat canspreadsheet package & word processor in preparing this report. You are expected o use a be applied to larger problems on Earth. • To save time, conduct experiments FIRST to collect data for your analyses. Experiments can be done in any order, so rotate amongst stations. Save your calculations and analyses for afterward (e.g. MGM has flown twice on the Space Shuttle (STSweek 2 Figure 4), involving nine dry sand 79 and -89; ) 4. An astronaut a soil sample module into specimens. These were highly successful, showing Figureexperiment in insertswill Shuttle middeck. data to • Use the spreadsheet (provided) to compile your data. For apparatus 2 the Space provide your (NASA) you the MGM strengthTA who will compile ALL times greater and the properties two to three of the data for your section and you will use this master dataset to stiffness properties ten times greater than conventional theory predicted. On the STS-107 mission answer the questions. (scheduled for 2002), MGM scientists will investigate conditions with water-saturated sand resem• USE CARE in your experiments. Aim to produce repeatable results. Sloppy work = sloppy data! bling soil on Earth. Three sand specimens will be used in nine experiments. MGM can also benefit • fromDo not contaminate (mix) samples. Place all wet samples in the respective collection simu- for extended tests aboard the International Space Station, including experiments under dishes lateddrying. and ure to clean up all workspaces when finished. lunar Be s Martian gravity in the science centrifuge. The heart of MGM is a column of 1.3 kg (2.8 lbs.) of sand, 7.5 cm in diameter by 15 cm tall (3 x Experiment 1: Displacement shear test 6 in.). This is Ottawa F-75 banding sand, a natural quartz sand (silicon dioxide) with fine grains 0.1 to 0.3 mm in diameter.aw from GEOG103, which used inhat the amount of hexperiments and force (T) Recall Coulomb’s Friction L Ottawa sand is widely states t civil engineering orizontal shearing evaluations. The sand is contained in a latex block over a flat surface with a normal cameras canload of N, is required to initiate the movement of a sleeve printed with a grid pattern so (resistance) record changes inbshape and (position. ???? = ???????? metal plates on three guide rods cap each end of the Tungsten described y Equation 1): (1) specimen. The specimen assembly is contained in a test cell N where ? is coefficient of static friction between the block and a shaped like an equilateral prism and comprising a Lexan flat slip plane. Equation (2) expresses confine and stabilize jacket filled with pressurized water toCoulomb’s law for sand, ????! = ????! ???????????????? (2) the specimen during launch and re-entry. An electric stepper motor moves the top platen to compress and relax the to T/A T where ?f is shear stress along a slip plane equivalent sand column. A load cell measures forces. The test cell is held on a (where T is shear force at point of slippage and A is area of a rigid test/observation pad mounted between an array of plane parallel to T), ?n is the normal stress on the plane (equal to three CCD cameras. Because this mechanism is too complex (?n)f N/A, where N is the normal force), and the internal friction angle to replicate in a classroom, this exercise uses a simpler device. Slip plane ? is related to ? (i.e., tan ? = ?). At the condition of slippage, complete failure (mass wasting) of the sediment mass may not Coulomb’s Friction Law necessarily occur but the initiation of movement begins between You may the two layers. recall Coulomb’s friction law from your physics courses. If a wooden block is pushed horizontally across a Figure 2 (right)2 horizontal force (T) required to initiate table (Figure 5), thedemonstrates Coulomb’s Friction Law by ?f showing movement of a b Equation (1) where µ esponse to an the movement is given inlock on a flat surface in ris the coeffiapplied shearing force, T, and the block and the table and N cient of static friction betweennormal (resisting) force, N. The lower figure force. The friction angle ø is related to µ (tan ø is the normal shows a slippage plain in a sediment matrix and Figure 5. (a) Slip of a wooden block, (b) A slip plane in i soil mass (Budhu, 2000). =related termssof stress,aCoulomb’s tress for ), which are both a function of anternal friction angle, ?. µ). In shear tress (?f) nd normal s law (?n sand is expressed Mechanics of Granular Materials 2 EB-2002-03-53-MSFC from NASA Educational Brief EB-2002-02-53-MSFC or see also Fig. 4.20 in the Ritter text. 2 of 10 cial apparatuses that meet certain standards. This educational brief illustrates the standard direct shear test to determine the shear strength of soils. The standard procedure is modified to enable students (grades 9-12) to perform experiments using materials available at local hardware stores. Note: This experiment should only be used for educational demonstrations because it uses nonGEOG 376: Laboratory 1 standard equipment. The results will not be valid in a real-world civil engineering application. Fall 2014 The DST apparatus consists of a horizontally split box (Figure 6) and a frame to apply a horizontal shear load (T) under constant normal load (N). It is known as a shear box. Soil is placed in Experimental Procedure: the shear box, where the top half is moved relative to the horizontal plane (AB). Normal (or vertical) force (N) is applied through a platen or plate resting on the top of the soil. The shear force (T) This experiment tests the smotor strength of soils using aby weights through a pulley tandard direct shear test is applied through a hear for displacement control or modified version of a s system for load control. Usually, three or more tests are f a sample c a soil sample using three different (DST). The DST apparatus or ‘shear box’ consists ocarried out on hamber that is split horizontally to facilitate a constant vertical forces. Failure is determined when the soil cannot resist any further increment of failure plain (horizontal), a cap that covers the box slips). If and plotulley system to anormal stress, you shear stress Figure 3 force (i.e., when the upper chamber, you a p shear stress versus pply a horizontal get a straight line with a slope ediment is placed (T) under a constant normal load (N). Sequal to ? (Figure 7). in the shear box and the top half can move relative N ?n T Possible failure zone ? A B Shear Stress (?f) to the horizontal plane (AB). Normal (vertical) force (N) is applied through the cap resting on the top of the sediment sample chamber. Shear stress (T) is applied by attaching weights to the pulley system. ? Normal Stress (?n) Slip or failure plane Figure 6. Shear box (Budhu, 2000). Figure 7. Coulomb shear stress versus normal stress relation. Figure 3 shows the operating principle of the shear box apparatus (left) and a plot of shear stress versus normal stress (right)3. Typically, three or more tests are conducted on a sample using three different constant normal stresses. Failure occurs when the soil cannot resist any further shear stress and the upper half of the shear box slips. If you plot shear stress versus normal stress, you get a straight line with a slope Mechanics of Granular Materials EB-2002-03-53-MSFC • Attach equal to ? the m m-?1) pulley andrweight platform to the eye hook (in string, (Figure 3, ight). on the top half of the shear box. 9 Experiment Procedure Cap Record all data on the data sheet at the end of this brief. • Obtain a sample of about 3000 grams (~6.5 lb) of dry, clean sand. You can purchase it from local hardware stores or from swimming pool supply stores (uniform sand is used as a filter material in many applications). H1 H3 Direct Shear Box H0 Sand specimen H2 • Weigh the cap and record its mass (Mcap). mbled DST box with H0 = H1 + H2 - H3 • Assemble DST box at startshear(left) and and mount it on displacement Figure 10. the direct of test box, weight is added to cause the laboraFigure 11. Determining the height of the sand (right). Figure 4 (Figure 10). the experiment (left) and after failure tory benchshows a cross-?section of the shear box at the start of specimen. (middle) in response to a critical shearing stress. Cross-?section of the sample chamber (right) shows • Measure the depth, H2, ofor the experiment. the height, H3, of the top cap as shown in Figure important measurements f the shear box and Materials list and estimates prices for shear strength of sand experiment 11. Record these measurements. nsity fiberboard (0.5 in. x 2 x 2 ft.)*** quantity* price /unit total price** 1 4.00 4.00 • Weigh the dish filled with the sand to be tested. Place the sand in a container (e.g., beaker or dish) x 1.57 weigh the dish with the sand and record the weight. 7 x 105.4 x 40 mm (0.5 x 4.15 thenin.) 7 x 105.4 x 105.4 mm (0.5 x 4.15 x 4.15 in.) 7 x 80 x 40 mm (0.5 x 3.14 x 1.57 in.) 7 x 105.4 x 60 mm (0.5 x 4.15 x 2.36 in.) • Pour the sand slowly into the shear box while the pins hold the two parts of the shear box together. Compact the1 sand with a rubber 1.88 tamper or gently vibrate the table with your fist. The al pins ~3 x 85mm (1/8 x 3.3"; only 2 needed) 1.88 shear box should be filled with4.00 enough material so that the depth of sand in the shear box is mm shims 1 4.00 3 k 79mm x 79mm x 50mm 1 0.31 0.31 above the slip or failure plane NASAabout 80 mm deep). (i.e., Educational Brief EB-2002-02-53-MSFC modified from Budhu (2000) as in 7 x 80 x 60 mm (0.5 x 3.14 x 1.57 in.) 1" phillips screws e hooks 1 3.89 5.00 1 0.83 0.83 8 0.53 4.24 3 of 10 • Weigh the container with the leftover sand not poured into the box to determine the weight of 1 3.50 3.50 et (weight platform) the sand used in the test. 1 2.00 2.00 GEOG 376: Laboratory 1 Fall 2014 Materials: sand sample (in bin), shear box (DST) device, electronic balance, calculator, spreadsheet, mm ruler or tape measure, various weights, curiosity and/or enthusiasm. Steps: A. Assemble the shear box on the laboratory bench as shown in Fig. 4 (above, left). Ensure that: a) the pins that hold the two parts of the shear box together are in place, and b) the shims that separate the two parts of the shear box are also in place. B. Weigh the sample chamber cap (with rubber bands) and record its mass (Mcap). Record ALL measurements and related calculations in Table 1 (below). You will submit this table with your writeup. A digital copy will also be provided. C. Weigh the sample container (beaker) that holds the sand to be tested. Record this value. D. Fill the sample chamber slowly with the sand sample to a height above the failure plane that is approximately equal to the depth below it. E. Level the sand surface by gently shaking the chamber once or twice, and gently place the cap onto the sample. DO NOT compress the sample. Gently tap the chamber with your finger to allow the sample to settle. F. Weigh the sample container again with the leftover sand to determine the weight of the sample used in the test. Refill the beaker with sand. G. Fill a red bottle with ~250g sand. DO NOT fill bottles with water! Record the mass in table. Place the mass (MN) on top of the cap to provide the normal load, N. H. Measure and record the initial height, H0, of the sand sample as shown in Figure 4. I. Carefully remove the shims and the pins from the shear box. J. Weigh the weight platform (bucket or 2L pop bottle) and record the weight. Carefully attach it to the shear box cable below the pulley (see Figure 4). Avoid disturbing the shear box sample chamber while doing this. a) Note: the shear box should NOT move or displace under the weight of the bucket alone. If it does, you must reset the sample chamber and start again. K. Gently add weight in small increments (~50 g) by pouring sand slowly in to the bucket/pop bottle. Carefully watch the top half of the shear box for movement. Keep adding weight until the top half of the shear box starts sliding along the shear plane (Figure 4, middle). L. Record the mass (MS) that caused the shearing by weighing the bucket with sand. M. Take the shear box apart and remove the sand. Place it back into the sample container. N. Repeat the test (steps 3 through 13) for two other different normal loads (MN2 and MN3, or one 500g weight and one 1kg weight). O. Repeat the test (steps 3 through 13) for a sample that has been compacted by tapping the cap a few times with a solid object (e.g., hammer, textbook, etc. NOT a beaker!). Apply the same normal load (MNC) that you used for the second test (MN2 500g). 4 of 10 GEOG 376: Laboratory 1 Fall 2014 Calculations4 (10 marks): • For EACH of the 4 experiments (i.e., three MN values + MNC) record ALL measurements and calculate the following quantities (REMEMBER TO CHECK UNITS!). Compile values into Table 1. o Initial volume of the sand sample (V0) in m3 by multiplying the sample chamber dimensions by H0 (i.e., 0.08 x 0.08 x H0) o Sample cross-?sectional area, A, as the cross-?sectional area of the sample chamber in m2. o Sample dry unit weight, ?d = [(mass of sand in kg) x g]/V0, where g = 9.81 m s-?2 o Normal force, N = (MN + Mcap) x g o Shear force, T = (MN + MS + Mcap) x g o Normal stress, ?n = N/A o Shear stress at failure, ?f = T/A Experiment 1 Questions (27 marks): 1. Explain the difference between shearing force (T) and shearing stress (?f) in terms of both fundamental dimensions (e.g., M L T) and actual physical quantities. How do the units of measurement differ for each? Hint: refer to the various equations provided above. Physically, what do these units measure and how are they different? (4 marks) 2. Plot the ?n vs. ?f relation (see Figure 3) in a spreadsheet. Fit a linear regression model (best-?fit line) through the data. Include the equation of the regression model and R2 value on the plot. Also include full ancillary information (name, SID, instructor, lab section, title, legend, scales, units, etc) (4 marks) a. Describe any general patterns or trends that you see in your data. For instance, how does your plot compare to the example in Figure 3? What does your plot indicate, generally, about the relationship between ?n and ?f. Is it a strong or weak relationship (and how do you know this)? Is it positive or negative and what does that mean? Are there any oddities in your plot and what might those indicate. (5 marks) b. Using the slope of your regression line, calculate the value of the internal friction angle (?) in degrees. Recall, slope can be determined from the equation of the regression model (i.e., in the form y = m x + b, where m is slope) and converted to degrees. (2 marks) c. What does the internal friction angle mean, physically? How does your value compare to the typical angle of repose5 for dry sand (34°). Explain why these values are different or the same. (4 marks) 3. How did your compacted sample experiment (MNC) compare to the uncompacted sample runs (MN1-?3)? With specific reference to the basic forces at work within the sediment matrix (see Figure 2 and equation 2), explain any differences. Based on this (albeit limited) observation, what effect(s) might compaction have on the strength of sedimentary deposits? (4 marks) 4. How might the addition of moisture affect the response of this same sand to applied stress? Again, refer to the basic forces at work and consider our discussion in lecture on the roles of moisture in sedimentary deposits. (4 marks) 4 Pay close attention to unit conversions here. Usually, SI units are used in such calculations (e.g., L as m, etc.) Recall from your experiments in GEOG103 where you measured the resting angle of loose sand grains that angle of repose is a measure of static friction within a sediment matrix. 5 5 of 10 GEOG 376: Laboratory 1 Fall 2014 Table 1: Experimental data for direct shear test experiment. Use this for recording during the experiment, but please enter these data into the spreadsheet provided on CourseSpaces. (10 marks, see Calculations above) Date: Experiment conducted by: Lab section: Lab instructor: Experimental condition: MN1 MN2 MN3 MNC A) Sample Data 1. Sample area, A (m2) 2. Mcap (g) 3. Mass of full sample container (beaker, g) 4. Mass of sample container after sand placed in chamber (g) 5. Mass of the weight platform (bucket) (g) 6. H0 (mm) 7. Normal mass, MN (g) 8. Shear mass, MS (g) 7. Mass of sand sample in chamber [(3) – (4)] (g) 8. Initial sample volume, V0 (m3) 9. Sample dry unit weight, ?d (kN m-?3) 10. Normal force, N (kN) 11. Normal stress, ?n (kN m ) 12. Shear force, T (kN) B) Calculations -?2 -?2 13. Shear stress, ?f (kN m ) 6 of 10 GEOG 376: Laboratory 1 Fall 2014 Experiment 2: Testing Liquid and Plastic Limits for sediment deformation and failure Usually, sandy soils are stable and provide good support to applied normal loads (e.g., building foundations, road bases, circus tents) so long as they are not subjected to dynamic (changing) load conditions (e.g., shaking). Under normal conditions then, packing density and moisture content (dry vs. fully saturated pore spaces) are the main factors that control shear strength within sediment deposits and, in turn, how they respond to more dynamic load conditions such as earthquakes. In many areas, soils and sedimentary deposits extend below the groundwater table where the matrix becomes fully saturated. During an earthquake as sediments rearrange (Figure 1) some of this moisture is relocated as the pore matrix changes and pore water pressures rise. In response, particles lose contact (i.e., interparticle friction decreases) and soil flowage or liquefaction can occur. After the pore water pressure decreases, sediment particles typically settle in a denser condition, which results in ground subsidence (settling). The amount of settling depends on the amount of liquefaction and the normal load that existed on top of the sediments. Atterberg limits In 1911, a series of simple tests were devised by a Swedish physicist (Atterberg) to correlate moisture content and ‘plasticity’ of sediment samples. This technique is still used widely today to describe and classify cohesive soils (i.e., not unconsolidated sediments) and to determine properties related to their strength and compressibility – critical factors in the mass wasting process. Read more on p. 101-?104 in Ritter et al. text and see Figs. 4.23 and 4.24. In general, moisture-?laden sand to clay-?sized sediments exist in several rheological states categorized by order of decreasing moisture content, Mc: 1) suspension in liquid, 2) viscous liquid, 3) plastic solid, 4) semi-? plastic solid, 5) solid. In each state, the sediment will behave differently to an applied stress. This is because water exerts pressure within pore spaces (p) and the amount of pressure changes with moisture content. In general, p becomes more positive (outward pressure) with increasing moisture vs. more negative (suction pressure) for drier sediments. So, for different sediments and Mc there will be some threshold at which the deposit changes from behaving as a cohesive solid to a deformable plastic or viscous fluid that can fail or flow. These moisture contents (or consistency limits) define the Plastic Limit (PL) and Liquid Limit (LL) respectively (see Fig. 4.23 in text). The limits are derived experimentally with 2 relatively simple tests. Liquid Limit (LL): the threshold between liquid & plastic states characterized by the minimum Mc at which a sediment will flow under it's own weight. Defined by the Mc at which 25 taps in a LL device will close a standard groove in the sample. Plastic Limit (PL)6: the threshold between plastic & semi-?solid states characterized by the minimum Mc at which soil can be rolled into a thread 3mm in diameter on a glass plate without breaking. The range in Mc between these limits defines how the deposit responds to this transition in rheological response (i.e., greater range, larger threshold transition). This is described using the Plasticity Index, PI = LL – PL. In general, LL and PL both increase as sediments become finer. 6 Note that cohesionless sediments (e.g., sand & gravel) will have no ‘plastic’ stage and thus, the LL and PL coincide. 7 of 10 GEOG 376: Laboratory 1 Fall 2014 NOTES: • Provide your data from this experiment to your TA who will compile it into a master dataset that you will use to answer the questions. • Someone in your group must return 24hr after the experiment to weigh dried samples and record data. Your TA will collect and email everyone the data shortly thereafter. • USE CARE in your experiments. Aim to produce repeatable results. Sloppy work = sloppy data! • Do not contaminate (mix) samples. Place all wet samples in the respective collection dishes for drying. Be sure to clean up all workspaces when finished. Experiment 2a procedure: Liquid Limit Materials: fine grained sediment sample, Liquid Limit (Atterberg) device, groove tool, spatula, preparation dish, foil weighing dish (tared), plastic wrap, drying oven, electronic balance. Steps: To determine LL, prepare a sample of the fine sediment and test in the Liquid Limit device as follows. Be quick in weighing your samples and recording your results. Evaporation of water from the sample affects not only the accuracy of your results, but will also hold up the rest of the group. A. Weigh two foil dishes and write group name AND experiment number (e.g. 2a or 2b) on bottom in marker. Record empty dish weights. B. Prepare ~100 g of sample in a sample dish. Add distilled water sparingly until the sample has the consistency of a stiff paste. C. Place a portion of the sample in the bowl of the LL device. Level it with a spatula. Make a groove down the centre using the groove tool. The depth of clay should not exceed the depth of the groove. D. Rotate the handle at a slow, steady pace, count the number of taps it takes to close the groove by 1 cm along the length of the groove. The number of taps will depend on the consistency of your sample. If it does not close by 40 taps, you must add moisture (go back to step B). E. Determine the Mc of the sample after closure. To do this, obtain a 20-?50g sample from along the groove, place quickly in a pre-?weighed (tared) oven-?safe foil dish, and weigh the sample. Record the weight of the wet sample (Ww) by subtracting the dish weight (see above). Give dish to TA to place in drying oven at 105°C for 24 hours. Save remainder of sample for experiment 2b (below). • Note: cover the remaining sample in the LL device with plastic wrap. You will obtain a sample for the next experiment. F. Return the next day, remove sample from the oven (or TA will do this for you) and allow to cool to room temperature then weigh the sample again. Estimate Mc as a % using the ratio of mass of moisture to mass of dry soil as follows: Mc = [(Ww – Wd) / Ww] x 100 where Mc = moisture content (%), Ww = wet weight of sample, Wd = dry weight of sample. Note: be sure to subtract the weight of the foil dish from your calculations. G. Estimate the Liquid Limit of the sample by plotting the number of taps against the MC of the sample. Be sure to use data from all lab groups in your section. From the regression equation, the MC at 25 taps defines the LL. 8 of 10 GEOG 376: Laboratory 1 Fall 2014 Experiment 2b procedure: Plastic Limit Materials: sediment sample from Liquid Limit test, glass plate, ruler or calipers, foil weighing dish (tared), drying oven, electronic balance. Steps: Note: As in the previous experiment, be quick & careful in weighing your samples & recording results. A. Take a sample of about 20 g from the remaining prepared paste in the LL device from Exp. 2a. Place it on a glass plate and work the sample into a ball. B. Mould the ball between the fingers and palms of your hands until it has dried sufficiently for slight cracks to appear in the surface. Split the sample into 3 equal sized portions and follow steps C and D for each. C. Roll each sub-?sample into a thread approx. 6mm in diameter on the glass plate by repeatedly rolling it from finger-?tip to the second joint of your finger. Continue with enough pressure to reduce the diameter of the thread to about 3mm in five to ten complete rolling motions. Use a ruler or calipers to measure the diameter. Note: it is important to maintain a steady pressure while doing this. D. If cracks occur and the thread crumbles at 3mm, go to next step E. Otherwise, pick up the sample, remould it between the fingers to dry it further and repeat step C. E. Gather crumbled pieces (do not mould them together) and place them into a pre-?weighed, pre-?labeled (see above) oven-?safe foil dish. Place all crumbled portions for all 3 threads into this container. Weigh dish and sample and record weights. F. Determine the Mc of this sample as you did in exp. 2a above. This moisture content is the Plastic Limit for your sample. G. Calculate the Plasticity Index (PI) of your sample. H. Provide results to TA as soon as possible. You will need everyone’s results to complete the questions. Experiment 2 Questions (33 marks): Your TA will gather results from each group in your section and make these data available to you by via email or a spreadsheet on CourseSpaces. Use these results to answer the following questions. 5. Discuss how LL, PL, and PI varied for the sample. Do this by calculating standard deviation and mean values from the group dataset and disscuss the variation in each of these for the dataset. (6 marks) 6. Table 2 below shows typical values of LL, PL and PI for various sediments. How do our grouped results compare for this size of sediment? Explain any discrepancies. (5 marks) Soil Type Clay Silty Clay Silt Sandy Clay Loam Sandy Loam Sand Table 2: Atterberg Limits for Average Soils LL PL 50-?100+ 25-?40 40-?50 20-?25 30-?40 20 25-?30 18 20-?25 16 15 15 PI 25-?60 20-?25 10-?20 7-?10 5-?7 0 9 of 10 GEOG 376: Laboratory 1 Fall 2014 7. Where does our sample sit in the plasticity chart shown in Fig. 4.24 (below)? Does this make sense based on what you know about the properties of the sediment? How do your PI values match the ranges discussed in class? (3 marks) 8. According to our results, at what average Mc will this sediment start to deform under it’s own weight? What are the geomorphic implications of this? (3 marks) 9. Assuming that the average Mc of this sediment in it’s natural setting ranges 10 – 25%, would you consider this an ‘unstable’ sediment? Why or why not? (3 marks) 10. What does our mean PI value express about the threshold response of this sediment? What are the geomorphic implications of this (i.e., for potential mass failure?) (3 marks) 11. What other factors affect the PL and/or LL of a sedimentary deposit? Expand briefly with respect to how this factor affects the fundamental forces at work (2 marks) 12. What possible sources of error do you see with this experiment? (3 marks) 13. Briefly discuss one benefit and one limitation of the techniques used in this lab (DST, LL and PL tests) for determining the potential for mass wasting of sediments. Are they useful for actually predicting mass wasting hazards? Why/not? (5 marks) Figure 4.24 (Ritter et al. 2011) Plasticity chart showing example plots of several problem soils susceptible to expansion. Total: 70 marks 10 of 10
breathing,heart and lungs
breathing,heart and lungs An anxious patient is having rapid and shallow breathing. After a few moments, he complains of a tingling sensation. What could be the causes of this tingling sensation? What are the various patterns of respiration and their significance? Ethnicity and culture influence risk factors for heart disease. Do you agree? Why or why not? What is the technique of percussion and palpation of the chest wall for tenderness, symmetry, bulges, fremitus, and thoracic expansion? Explain. Would you perform hyper-resonance on a patient with a history of tobacco use? Why or why not? What are the mechanics of breathing with reference to lung borders and the anatomical structure of the lungs and diaphragm?
Questions regarding Renal case study at the end of…
Questions regarding Renal case study at the end of…
Questions regarding Renal case study at the end of the document attached. Renal Case Study 4 Biol 1120 Renal Case Study 4 Biology 1120 Anatomy and Physiology Chief Complaint: Dark Urine Clinical History: Nathan S. was a 10 year old boy who was brought by his mother to a community health clinic in a remote part of west Texas. The nearest physician was 80 miles away. When the physician assistant (PA) asked the reason for the visit, the boy’s mother said, referring to his urine, “His water looks like Coca- Cola.” She went on to say that she thought it might have been discolored the night before, but the light was poor and she couldn’t be sure. This morning she notice the toilet water was discolored after he urinated. She gave him juice and water and waited to observe for herself on his next bathroom trip about two hours later. “He’s not making much water, “she added. The PA asked the usual systems review questions. Specific questioning abuts drug abuse, over the counter medicines, and exposure to toxins revealed nothing suspicious. Nathan was not taking any prescribed or over the counter medicines. When asked about any recent health problems, his mother revealed that he had been a picture of good health and vigor except for “a cold and a bad sore throat” a few weeks earlier. Physical Examination and Other Data: Vital signs were: Temperature 98.5F, heart rate 88, respirations 16, and blood pressure 145/92. Nathan was quiet and not in distress and appeared to be of average height and weight. He did not appear anemic or jaundiced but his face looked round and puffy. When asked abut his face, his mother said she’d noticed it but thought it was because he was tired from staying up too late the last few nights with his father, working on the farm where they lived. The remainder of the physical examination was unremarkable. He had no rash, enlarged lymph nodes, or abdominal masses. The PA gave Nathen a big glass of water and collected some blood for the few basic tests that could be done by the office assistant on clinical equipment. Hematocrit was low (34mmHg) and blood glucose was normal. Sodium and potassium were normal. BUN and creatinine were slightly increased. After two hours, Nathan passed a small amount of dark brown transparent urine which tested strongly positive for both protein and hemoglobin by routine dipstick tests. Urinary sediment was concentrated by centrifugation. A moderate number of RBCs and a few red cell casts were noted, but they didn’t seem enough to account for the strongly positive hemoglobin. No crystals or WBCs were present. Clinical Course: The PA was puzzled. The pieces didn’t seem to fit together, so she called the hospital that managed the clinic and spoke to a pediatrician who said, “This is a classic case of acute glomerulonephritis. I haven’t seen one in several years.” The pediatrician outlined a treatment plan of salt restriction and therapy with diuretics and antihypertensive medication with carefully monitoring of urine output. The PA dispensed the drugs from the limited supply on hand and gave his mother a calibrated, disposable urine cup, instructed her to measure Nathans urine output and call daily with the results. His urine output was how initially but began to improve on the third day. Mother and son returned a week later. His daily urine volume had returned nearly to normal, urine hemoglobin and protein were less positive, and most of his facial swelling has disappeared. On the follow up visit a week later, his blood pressure was near normal. A blood specimen was collected and sent to the hospital to be tested for antistreptococcal antibodies which were previously detected in high concentration. Case Notes: Questions 1. Other than water and waste, name some important substances Nathan excreted in his urine. (1points) 2. Nathans blood pressure was elevated. What structure and or hormones in his kidney played a role in increasing his blood pressure? (3 points) 3. Nathans hematocrit was low, what is the norm range and why was his low? (3 points) 4. What were the principal nitrogenous wasted compounds in Nathans urine? (2points) 5. Did Nathan have proteinuria? Why? (2points) 6. His urine contained RBC casts, Of what importance was his finding? ( 3 points) 7. Why was Nathans face swollen? (2 points) 8. What caused the glomerulonephritis? (5 points) 9. Would the GFR be up or down? Why (4points)