Business Research, Statistics and Decision Models

Business Research, Statistics and Decision Models

Business Research, Statistics and Decision Models
Recall any experience you had with business data perhaps at your work place, and how have you used it and what you used it for; and then: 

Define business research, statistics, and decision models. Why are they important to business?

This needs to be at 300 words written in APA style (no bullet points or numbering).  Needs to reputable resources.  (Do not include headings, title page, or abstratct).  Does need to include reference page (is not included in the word count).  Needs to be done by 12:00pm on 10/12/14 - no execptions so don't bid if you can't have done by that time frame.  

HRM 590 Final Exam

HRM 590 Final Exam

HRM 590 Final Exam

1. (TCO A) Discuss two major trends that are currently affecting the practice of human resource management. Provide examples of how a company's HRM practices might be affected by each trend.

2. (TCO B) To be a strategic business contributor, human resources must enhance organizational performance, expand human capital, and be cost effective. Discuss how HRM professionals must balance the competing demands made on them.

3. (TCO C) Explain the most significant impact of a union on human resource management.

4. (TCO D) In developing human resource strategies, businesses face several important challenges. Identify and describe four of these challenges. Link these challenges back to the HRM department's strategy plan.

5. (TCO E) While layoffs may seem prevalent in our work environment today, many companies still face the challenge of retaining top performers and the skills needed to complete the job. Explain how you would create a proactive retention program for a company. Describe the steps you would take and substantiate each step.

6. (TCO F) Substantiate the value of employee performance evaluations to the business and the employee. Describe the factors/components you would include in a performance management program and validate those items.

7. (TCO G) Pay for performance plans vary in design. Some are designed to reward individuals as well as team results. Describe both types of pay plans. Evaluate the value of both plans as it relates to the organization/business.

8. (TCO H) Explain how human resource technology can improve efficiency and effectiveness of HRM functions. How, specifically, can technology support the business? Provide an example.

Quantitative Analysis for Management-Chapter 1 Introduction to Quantitative Analysisalse

Quantitative Analysis for Management-Chapter 1 Introduction to Quantitative Analysisalse

Quantitative Analysis for Management,

Chapter 1 Introduction to Quantitative Analysisalse


true false

1) Interviews, statistical sampling, and company reports provide input data for quantitative analysis models.

2) In the early 1900s, Henry Ford pioneered the principles of the scientific approach to management.

3) Managers do not need to be familiar with the limitations, assumptions, and/or specific applicability of the quantitative analysis technique to use it for accurate decision making.

4) During World War II, many new scientific and quantitative techniques were developed to assist the military, and these developments were so successful that many companies started using similar techniques in managerial decision making and planning after the war.

5) Business Analytics is a data-driven approach to decision making that allows companies to make better decisions.

6) Descriptive Analytics is aimed at forecasting future outcomes based on patterns in the past data.

7) When a problem is difficult to quantify, it may be necessary to develop unspecific objectives.

8) The Quantitative Analysis Approach consists of six steps.

9) A mathematical model shows the relationship between quantifiable and non-quantifiable information.

10) Decision variables may also be called parameters.

11) Model variables can be controllable or uncontrollable.

12) A series of steps or procedures that are repeated is known as an algorithm.

13) A model is a representation of a situation.

14) A parameter is a measurable quantity that may vary or is subject to change.

15) Trying various approaches and picking the one resulting in the best decision is called incomplete enumeration.

16) All problems can be solved by considering only the quantitative issues.

17) A profit equation is an example of a schematic model.

18) Testing the data and model should be done before the results have been analyzed.

19) Sensitivity analysis helps us estimate the effect of known and unknown errors in our model.

20) Models can help us analyze a problem and sell a decision to those who must implement it.

21) A sensitivity analysis allows a manager to answer the "what if" questions.

22) One problem in using a quantitative model is that the necessary data may be unavailable.

23) Management support and user involvement are not essential in the successful implementation of quantitative analysis projects.


mcq

24) Which of the following terms is interchangeable with quantitative analysis?

A) management science

B) economics

C) financial analysis

D) statistics

E) None of the above

25) Operations Research is known as

A) the science of numerical analysis.

B) the science of sensitivity analysis.

C) the science of better.

D) the science of modeling.

E) None of the above

26) Who is credited with pioneering the principles of the scientific approach to management?

A) Adam Smith

B) Henri Fayol

C) John R. Locke

D) Frederick W. Taylor

E) Charles Babbage

27) Which of the following techniques involves the study and consolidation of historical data for a business and an industry?

A) descriptive analytics

B) prescriptive analytics

C) predictive analytics

D) management science

E) operations research

28) Which of the following techniques involves the use of optimization methods to provide new and better ways to operate based on specific business objectives?

A) descriptive analytics

B) prescriptive analytics

C) predictive analytics

D) quantitative analysis

E) qualitative analysis

Answer: B

Diff: 2

Topic: BUSINESS ANALYTICS

29) A(n) ________ is a representation of reality or a real-life situation.

A) objective

B) model

C) analysis

D) algorithm

E) None of the above

30) A measurable quantity that may vary, or is subject to change, and can be controlled is known as a(n)

A) decision variable.

B) algorithm.

C) parameter.

D) solution.

E) None of the above

31) A set of logical and mathematical operations performed in a specific sequence is called a(n)

A) complete enumeration.

B) diagnostic analysis.

C) algorithm.

D) objective.

E) None of the above

32) The ability to examine the variability of a solution due to changes in the formulation of a problem is an important part of the analysis of the results. This type of analysis is called ________ analysis.

A) sensitivity

B) implicit

C) normal

D) scale

E) objective

33) Which of the following is not one of the steps in the quantitative analysis approach?

A) Defining the Problem

B) Developing a Solution

C) Observing a hypothesis

D) Testing a Solution

E) Implementing the Results


34) The condition of improper data yielding misleading results is referred to as

A) garbage in, garbage out.

B) break-even point.

C) uncontrollable variable.

D) postoptimality.

E) None of the above

35) Expressing profits through the relationship among unit price, fixed costs, and variable costs is an example of

A) a sensitivity analysis model.

B) a quantitative analysis model.

C) a postoptimality relationship.

D) a parameter specification model.

E) None of the above

36) The widespread applicability of operations research methods to business followed which war?

A) The U.S. Civil War

B) World War I

C) World War II

D) The Korean War

E) The Vietnam War

37) Which of the following statement(s) are true regarding the advantages of mathematical modeling?

A) Models accurately represent reality.

B) Models can help decision makers formulate problems.

C) Models can save time.

D) Models may be the only way to solve some large and complex problems in a timely manner.

E) All of the above


38) A measurable quantity that is inherent in the problem is called a(n)

A) decision variable.

B) uncontrollable variable.

C) algorithm.

D) parameter.

E) enumeration variable.

39) Trying various approaches and picking the one that results in the best decision is called

A) the trial-and-error method.

B) incomplete enumeration.

C) complete enumeration.

D) algorithmic approximation.

E) sensitivity analysis.

40) Models that do not involve risk or chance are

A) probabilistic models.

B) postoptimality models.

C) deterministic models.

D) MIS models.

E) None of the above

41) If input data are accurate to three significant digits, then the solution results can be accurate to how many significant digits?

A) one

B) two

C) three

D) four

E) six


42) Postoptimality analysis is most closely associated with

A) collecting input data.

B) developing a model.

C) sensitivity analysis.

D) writing a computer program.

E) None of the above

43) The break-even point is an example of a

A) postoptimality model.

B) quantitative analysis model.

C) schematic model.

D) sensitivity analysis model.

E) None of the above

44) A controllable variable is also called a

A) parameter.

B) decision variable.

C) mathematical model.

D) measurable quantity.

E) None of the above

45) Evaluating all possible values of a variable in a model is called

A) trial and error.

B) complete enumeration.

C) an algorithm.

D) variablization.

E) None of the above

46) What is the formula for the break-even point of a simple profit model?

A) Fixed Cost / Variable Cost Per Unit

B) (Selling Price Per Unit - Variable Cost Per Unit) / Fixed Cost

C) Fixed Cost / (Selling Price Per Unit - Variable Cost Per Unit)

D) Fixed Cost / (Variable Cost Per Unit - Selling Price Per Unit)

E) Selling Price Per Unit - (Fixed Cost / Variable Cost Per Unit)

47) The break-even point of a simple profit model represents a(n)

A) decision variable.

B) uncontrollable variable.

C) parameter.

D) constant.

E) None of the above

48) A(n) ________ model is one that is accurate and correctly represents the problem or system under investigation.

A) robust

B) valid

C) sensitive

D) optimal

E) feasible

49) Which Excel feature is an optimization technique that can maximize or minimize a quantity given a set of limitations or constraints?

A) Optimizer

B) Goal Seek

C) Analysis Tool-Pak

D) Algorithm Builder

E) Solver

50) Which Excel feature allows the user to specify a target or goal and the variable that is desired to change in order to achieve that goal?

A) Solver

B) Goal Search

C) Target Search

D) Goal Seek

E) Target Seek


51) All of the following are real computer applications that perform quantitative analysis except

A) Solver in Excel.

B) Goal Seek in Excel.

C) Excel QM.

D) POM-QM for Windows.

E) QA for Windows.

52) As one attempts to develop a model, which of the following problems might she encounter?

A) The problem may not fit a textbook approach.

B) There will be no data available to test the model.

C) Not everyone will understand the problem in the same way.

D) All of the above

E) None of the above

53) Which of the following is a picture, drawing, or chart of reality?

A) scale model

B) physical model

C) mathematical model

D) schematic model

E) abstract model

54) Which of the following is not considered a possible problem in the quantitative analysis approach?

A) validity of the data

B) lack of commitment

C) resistance to change

D) subjective solutions

E) hard-to-understand mathematics

55) Quantitative analysis is ________.

?


56) Identify the steps of the quantitative analysis approach.

57) What are the three categories of business analytics?

58) The study of the consolidation of historical data to describe how a company has performed in the past is called ________.

called ________.

60) The use of optimization methods to provide new and better ways to operate based on specific business objectives is called ________.

61) A controllable variable is also called a ________ variable.

62) A picture, drawing, or chart of reality is a ________ model

63) Identify some possible problems in the quantitative analysis approach.


64) Identify three potential problems with people (two with management and one with the quantitative analysts themselves) that may hinder successful implementation of a quantitative model.

65) In making a decision, both ________ and quantitative factors must be considered.

66) Inaccurate model input data leads to inaccurate model solutions. This phenomenon is commonly referred to as ________.

67) The solution process of ________ implies that we look at all possible solutions.

Complete enumeration

68) Once we have a solution, we should then perform ________ analysis.

69) ________ models do not involve risk or chance.

70) ________ models are uncertain.

71) How can an analyst overcome the threats to successful implementation of a quantitative model?

MGMT 410 Human Resource Management

MGMT 410 Human Resource Management

MGMT 410 Human Resource Management

Week 1

Strategic Linkages Assignment

DQ 1 The Purpose of HRM

DQ 2 Functions of HRM

Week 2

Case Study; Off-the-Job Behaviors

DQ 1 EEO Laws

DQ 2 Privacy and Technology

Week 3

DQ 1 Job Analysis

DQ 2 Recruitment and Selection

Web Exercise; Understanding Job Analysis

Week 4

DQ 1 Employee Orientation

DQ 2 Career Management

Midterm Exam(Set 1)

Midterm Exam(Set 2)

Week 5

DQ 1 Performance Appraisals

DQ 2 Pay Systems

Simulation; JVA Corporation

Week 6

Case Study; A Perky Way to Productivity

DQ 1 Benefit Packages

DQ 2 Health and Safety

Week 7

Case Study; Collective Bargaining at West University

DQ 1 Labor Laws

DQ 2 Why We Hate HR Article

industry analysis

industry analysis

I need help doing the industry analysis for a Business planning:

My team is doing a consulting firm will focus on marketing, It will be an LLC and It will be located in Miami FL.

MGMT600 Business Plan Grading Rubric 4.2	

Instructions for Completing Plan

Industry review	15	Research industry averages for profitability in your marketplace. Use this information to determine the validity of your own projections and make changes if necessary. 

Regulation review and legal concerns	15	Determine your location and business environment. Address all legal, zoning, and licensing concerns your business will face. What form of business will you set up? Why? The level of detail required for this section will depend on your type of location (virtual, retail, warehouse, office, restaurant, etc.) and on your idea. Demonstrate that you have completed your research. DON'T say "We will obtain all of the appropriate permits"; instead, summarize them. When you explain your form of business—remember your audience. For example, if you select an S corporation, explain your reasoning for that selection in the context of your potential business, rather than providing the definition of an S corporation. Address any pending regulations which may have an impact on your business.

Competitive analysis	15	Describe the competitive landscape. Who are the key competitors? What are their strengths and weaknesses? Approximate their market shares. How will you take share from them? How will they most likely try to stop you if you are successful? Who are your indirect competitors? What do they offer your prospects?

SWOT analysis	15	Identify your company's major strengths, weaknesses, opportunities, and threats. Describe how you plan to maximize your strengths and opportunities and minimize or mitigate your weaknesses and threats.

Industry Analysis Totals	60	This section will give the reader an understanding of the overall industry with specific facts and figures. Data is critical in this section as you must specify the size of the market and show how you plan to capture the market. You should also have an overview of the competitors in your space.

Can you choose and discuss two metrics

Can you choose and discuss two metrics

Can you choose and discuss two metrics that an organization might consider when developing a strategic plan?
9.2 
 Tracking Performance Using Metrics

Two old adages underscore why the use of metrics is so vital in organizations:
•	"What gets measured gets managed."
•	"You can't improve what you can't measure."
By way of illustration, consider the true example of a nonprofit organization that provided educational workshops for high-school students in an effort to reduce the teen crime rate in the area around the city in which it operated. The directors were asked how they knew how the organization was performing and what information was reported to its sponsors periodically. They said they kept records of student attendance at every workshop they gave, the number of workshops each week and at which school, who gave the workshops, and the content of each workshop. In other words, what they said they were going to do and what they did was what was measured and reported. But how effective were the workshops? What was the purpose for developing and giving them? Did the teen crime rate decline over the couple of years that this organization was giving its workshops? And even if they did—which no one knew—was it because of the workshops?
In this example, the donor was as much at fault as the people in the organization for not insisting on better measures and better data. Clearly, like many other organizations, this one measured what is easy to measure, not what needed to be measured. Unfortunately, those running the programs didn't know, or had never considered, the difference. There are many ways to measure performance, but the more systematic and reliable the method is, the more credible the data will be in supporting strategic plans and their implementation.

Fancy Collection / Super Stock
The manager's job is to collect and organize current project data by project.
Organizations mistakenly measure the results of their activities or effort, not progress toward achieving objectives. Although impact measurement is important, process evaluation is critical to strategic management. Evaluating progress at numerous stages throughout implementation allows the manager and his or her team to make adjustments and modifications to the strategy.
Operational objectives, discussed in Chapter 8, must be set carefully. Making good progress toward objectives that were set too low is of little value and won’t implement the strategy properly. Setting them too high de-motivates the workforce and is just as bad. So let us assume that "stretch" objectives—set at just the right level but that demand a little more from everyone to achieve—have been set all the way down the line, plans were devised forever unit that matched its budget allocations, and that it was these plans that are now being carried out by everyone in the organization.
How does top management monitor whether everything is "on track" or "on plan?"
The manager's job is to collect and organize current project data for there view period, by project, in their respective areas of responsibility. The example shown in Figure 9.1 is a step in the right direction, but has to be summarized for the month. For example, the figure shows an almost instantaneous picture for daily monitoring, a time frame and level of detail required only by the people actually doing the work. From such daily reports and the status of projects at the end of the month, manager would need to extract and summarize information on each major project, being careful to note which projects were on schedule and under budget and which weren't and by how much. The latter could constitute a separate "exception" report of negative variances (discussed immure detail later), which are projects that have slipped their schedule or are over budget, together with additional information on how much extra it might cost to get all of them back to meeting their deadline.
The Budget as a Control System
Recall the vignette about Pacifica Corporation recounted in a box in Section 2.9. As part of the rapid change in its culture, five original managers including the CFO were replaced. The CFO was let go because he did not understand the concept of budgeting but for months had fooled management into thinking he did. When asked if everything were "on budget," he would reply, "Yes," which was accepted at face value given his position as CFO. After about six months, when it became evident that costs were really out of control, he was asked if everything was still on track with the original budget that had been approved. Of course they weren't. Each month, when expenses had exceeded the budget, he had simply raised the budget amount accordingly and reported that things were "on budget," rather than take steps to reduce expenses.
The budget is a control system in that it allows management to compare actual performance to a standard, measure the variance, take action to reduce the variance, reset or update, and test again. Another example of a control system is a packaging machine that automatically fills boxes with a precise weight of cereal and signals the operator the moment the filled weight exceeds or falls short by a preset small amount, enabling immediate adjustment of the machine. In the case of a budget as control system, action is taken only if expenses exceed the budget. Further, cumulative expenses are compared to cumulative budgets so that an operational unit that has overspent one month can "make up" and spend less than its budget in the following month (Figure 9.2).
One of the hallmarks of a good control system is that corrective action is taken as soon as it is found to be needed. Why wait until the end of the year to discover that you have gone over budget? At the other end of the scale, should you check every week? That makes no sense, either. Monthly checking is about right, and most information systems can provide such information monthly, either as needed onscreen or in customized monthly report sent to all operational managers.
In large organizations that have federal contracts, for example, government auditors closely examine expense reports, time sheets, and invoices related to programs. So, for example, when a contractor requests increased funding, budget controls are in place to quickly advise regulators alto the legitimacy of the request. In this way, the government can determine when increased expenses are justified, or when to tell its contractors to cut costs.
Addressing Negative Variances
Managers in well-run corporations make a point of meeting with their direct reports regularly to go over progress and discuss any problems. One focus of the meeting should be variances and any exception reports that detail differences between plans or standards and actual performance. A negative variance is an instance where a project's progress is delayed and could miss a deadline, or where its budget has-been exceeded, or where performance comes up short of a quantitative standard or expectation.
Figure 9.2: The budget as control system

What can be accomplished in such a meeting between a manager and a direct report? First, the manager should learn about the particular circumstances surrounding negative variances of some projects, what might have caused the delays or budget overruns, and which otherprojectsmight be in jeopardy as a result. They should ask questions and listen carefully to the responses. Both the manager and direct report should note questions to which an answer could not be provided because the direct report didn't have the necessary information.

© Age footstock/Super Stock
Well-run corporations have their manager's report in every month to track progress and discuss any problems that have arisen.
Second, the manager and direct report should discuss potential solutions to the negative variances. Some projects can be pulled back on track through either the direct report getting project personnel to acknowledge problems and solve them, helping them to find solutions, and trying to remove obstacles that might be delaying progress. Also, if budgets are overrun, a new lower budget that compensates for the overrun must be communicated to project personnel. The manager should focus on projects where there is a direct relationship between schedule and budget. That is, where speeding them up will cost more, and conversely, where reducing the budget results in unacceptable delays. It is imprecisely such situations that any critical-path software becomes invaluable, because it lets a project leader or supervisor try out different alternatives until both parameters (project time and budget) meet expectations.
Third, the manager should insist that the direct report file—within the next couple of days—a revised plan containing the points that were discussed that will bring projects and budgets back in line.
Finally, meetings represent an opportunity for the manager to strengthen relationship with the direct report. In most cases, the meeting is just between the two of them (although inviting other project managers who are in a better position to provide explanations is also common). What is the direct report most worried about? Is the communication between them as "open" as it needs to be? What's really going on? Taking the time to delve a little deeper and offer guidance and counseling is often well worth the time.
Be mindful of a couple of potential red flags: Some managers don't like hearing or dealing with bad news and might even tells their reports they don’t want to hear it. So if a supervisor is repeatedly told, "everything is okay," he or she might well suspect that it's not. The manager will have to dig deeper and even go to chat informally with the direct report's colleagues and team members. A manager also needs to be sensitive to whether a direct report is losing control of the team or his or her responsibilities. If the employee feels overwhelmed and relatively powerless to stem the tide, a real problem exists.
This kind of face-to-face meeting with a direct report goes on up and down the hierarchy. Typically, a manager might have a half dozen to dozen direct reports, some fewer, some more. A manager should schedule all meetings with direct reports over the course of a day ortwobefore meeting with his or her own supervisor, taking on the role of "direct report."
If this description of the organization conveys the idea that this is one massive control system that is exactly the intent. During execution or implementation of a strategy, doing the work and controlling the work—its quality, timeliness, and adherence to a budget—is vital. And in the spirit of a good control system, actual performance is compared to a standard, the variance noted (especially negative variance), solutions developed, and a correction applied as soon as possible. Data collected about performance, especially as part of an information system, are essential, but a control system needs more; that's why the face-to-face meetings are imperative and why everyone in the hierarchy must follow-through and put the corrections into effect to improve performance the following month.
This description also gives the impression that managers take part in many meetings, and that too is by design. With so many meetings to prepare for and attend, when do managers get time to do their real work? Perhaps this is the fallacy. Recall the definition of a manager as” someone who gets work done through other people." The time spent in meetings is the work. Whether that time is wasted or not is another issue and goes directly to whether the person conducting the meeting is an effective manager. Managing well is difficult, challenging, time-consuming, but ultimately very satisfying. The job gets done on time and within budget, and your direct reports grow and develop into productive, congenial team members.