1.The Styrofoam cups function as calorimeter, and…

1.The Styrofoam cups function as calorimeter, and…

1.The Styrofoam cups function as calorimeter, and before the heat capacity of nickel is measured, the heat capacity of the calorimeter needs to be determined. Hot water and cold water are mixed in the Styrofoam cups, and the change in temperature is measured. From the following data, calculate the heat capacity Ccal of the calorimeter:
Mass of empty Styrofoam cups: 6.2 g
Mass of cups + 70 mL H2O: 74.6 g
Mass of cups + 70 mL H2O + 30 mL hot H2O: 99.1 g
Initial temperature of water in cups: 24.0 °C
Temperature of boiling water bath:99.5 °C
Final temperature of water: 40.1 °C 

Additional Requirements 
Level of Detail: Show all work

OPS MGMT – DC Delco Corporation

OPS MGMT – DC Delco Corporation

DC Delco Corporation
DC Delco Corporation manufactures and sells the various electrical parts. One of the bestselling
products is an electric motor. The company recently received a $750,000 order for
various quantities of three types of electric motors: Model A, B, and C. More specifically, the
firm received the following number of orders for each of the three electric motors.
Model A Model B Model C
Number Ordered 3,000 2,000 900
Each electric motor requires a certain amount of time to wire and harness. Model A requires 2
hours of wiring and 1 hour of harnessing per unit; Model B needs 1.5 hours of wiring and 2
hours for harnessing per unit; and Model C requires 3 hours of wiring and 1 hour of harnessing
per unit. Unfortunately, DC Delco does not have enough wiring and harnessing capacity to
satisfy the order by its due date. The firm currently has only 10,000 hours of wiring capacity and
5,000 hours of harnessing capacity available to devote to this order. However, the company can
subcontract any portion of this order to one of its suppliers. The unit costs of producing each
model in-house and buying the finished products from the vendor are summarized below.
Model A Model B Model C
Cost to Make $50 $83 $130
Cost to Buy $61 $97 $145
You have been hired by the CEO of DC Delco, James Strong, to determine the number of electric
motors to make and the number to buy to fill the customer order at the least possible cost.
Directions: This case analysis can be done either individually or by a team with a maximum of
three students. Prepare a three -page (maximum) business memo to James Strong, outlining
your analysis, explanation, and conclusion. Submit your business memo on April 17, 2015
(Friday), 11 am. (No Exception). On the main body of your business memo, identify and
explain your decision variables to solve the problem. Using the decision variables, you are
required to write down the mathematical equations representing this problem and to use Excel
Solver to solve the problem. Include and explain all of the mathematical equations on the main
body, and also attach Excel Solver results at the end of your business memo as your supporting
materials. Make sure to include your team members’ names and their roster numbers on the
memo, too.
Use the memo writing guidelines (sample business memo) from the course website as your
reference. Do not simply follow the guideline. Your business memo should be clear, in detail,
professional, and self-explanatory. Along with your thorough analysis, a good organization and
Spring 2015
2
flow of paragraphs and sentences, clarity and correctness, and your writing are important in the
evaluation.
If the case analysis is done by a team, a team evaluation will be conducted after submitting the
memo to reflect your contribution to the analysis.
Checklists for Your Business Memo:
(1) Do you have a maximum of three pages, including all of your supporting materials?
(2) Did you identify and explain your decision variables on the main body of your memo?
(3) Did you include and explain all of the mathematical equations on the main body?
(4) Did you attach Excel Solver results, showing your total cost, at the end of your memo?
(5) Did you complete a final editing before submitting your memo?


THIS IS A TEMPLATE **************

(The business memo format is best suited for presenting analysis and results of an issue that requires no more
than 2-3 pages of text and a couple of tables and exhibits. Anything longer should use a business report format
with a very short transmittal memo).
DATE: March 13, 2004
TO: Martha Glamour, CEO Stylish Living Magazine
FROM: Simpson and Lee Consulting Associates (This tells the reader your role as writer – e.g.
consultant, analyst to reporting to manager, etc.)
Thomas Simpson (Principal Writer) Richard Lee (Principal Editor). (The words
principal writer and editor do not appear in a real business memo; they are here for grading
purposes only. In the real world you would substitute the titles of the authors, e.g. Partner or
Senior Manager).
RE: Analysis of existing cost system and desirability of switching to ABC.
Thank you for allowing us the opportunity to work with your company (simple courtesy and positive
start). As requested, we have evaluated the strengths and weaknesses of your company’s existing
cost system and evaluated the desirability of switching from the existing cost system to an
activity based cost system ABC). (This sentence should clearly state the “big” issue in the case. It should
also help to remind the intended audience of the purpose of this memo). Our analysis uses Products X and
Y as test cases to understand how the existing and proposed ABC systems would compute
product costs. Based on our study, we have reached the following conclusions:
1. The cost of Product X is higher than Product Y under the current system; the cost Product X is
lower than Product Y under the ABC system.
2. The existing cost system has several weaknesses that make the data unreliable and misleading.
3. We recommend that the company should abandon the existing system and replace it with an
activity based cost system as it will provide better product cost information for decision making.
(The three points above are what the writing guide refers to as “headlines”. They state the major conclusions of
your memo and should (like a newspaper headline) grab the reader’s attention. Note a headline does not contain
detailed results such as cost of Product X is $3.45 per unit.).
The rest of this memo explains the basis of our conclusions. We will present our analysis in four parts.
The first part deals with product cost under the existing system. This is followed by . . . The next section
. . . The last section . . .
(The purpose of these sentences is to give the reader a road map to follow your discussion. Note that the four
parts probably correspond to the detailed questions at the back of the case. These questions typically lead you to
address the big issue in the case. If the memo is longer than 2 pages, you may have to use subheadings to avoid
long bodies of texts).
Product Cost Analysis
Our analysis begins by computing the costs of the two products, X and Y, using the current cost system.
Exhibit 1 shows the manufacturing cost of the two products under the existing cost system. As row 5
shows, product X has a cost of $25.45 per unit. (Note the reader is being pointed to the data and not left to
find it for him or herself). Also, as column 3 of the Exhibit shows, most of this cost, approximately 65

percent, is indirect manufacturing overhead. The last row of the Exhibit shows that . . . (Rest of the details
omitted intentionally).
Exhibit 1
Costs of Manufacturing Product X and Product Y
___________________________________
Insert table here
(Note that EXCEL tables and PowerPoint flowcharts can be pasted directly into your document. Make sure that
EXCEL tables fit the width of your page and PowerPoint flowcharts should be pasted as pictures(use the Paste
Special command).
___________________________________
Weakness of Existing Cost System
The current system of assigning overhead to products using direct labor hours does not represent a fair
measure of resources used by the products. Your company produces a large variety of products in low
volume with highly automated operations. Direct labor accounts for only 3% of the total cost of
manufacturing (See Exhibit 1). In your production environment, most of the indirect manufacturing costs
are driven by cost drivers that have little or no relationship to the amount of direct content of each
product. The relevant cost drivers in your situation are . . . (Rest of the details omitted intentionally).
Conclusion and Recommendations (Not you are reiterating what you said up front one more time). .
We recommend that the company abandon its current cost system and replace it with . . . (Rest of the
details omitted intentionally). This will allow you to better measure the resources consumed by each
product and lead to better pricing and product mix decisions . . . (Rest of the details omitted intentionally).

Course project: HIV

Course project: HIV

Course project

The topic I chose is HIV.

The length of the Course Project should be seven to ten pages, double-spaced, and in strict APA format. You will need at least five outside sources.

The Course Project will include at least the following sections; you may want to include others if you deem them appropriate:

1. Introduction of your Topic
2. Challenges and Problems Associated with your Topic
3. Review of the Community Health Literature
4. Critical Analysis of Challenges/Problems
5. Recommended Solutions
6. Implementation of Solutions
7. Justification of Solutions
8. Conclusion
9. References

op mngt-Which one of the following statements about total quality management (TQM) is TRUE?

op mngt-Which one of the following statements about total quality management (TQM) is TRUE?

Question1
Which one of the following statements about total quality management (TQM) is TRUE?
Select one:
a. Total quality management reduces the internal failure costs but not the external failure costs.
b. In total quality management, workers have the authority to stop a production line if they see quality problems.
c. Total quality management means inspectors are responsible for finding out who makes the defects.
d. Total quality management reduces the external failure costs but not the internal failure costs.

Question2
What is one reason that Six Sigma is more difficult to apply to service processes?
Select one:
a. There is no manual that suggests how Six Sigma can be applied to services.
b. The work product is more difficult to see.
c. There is no way to measure process capability of a service product.
d. The National Six Sigma Society cautions against using it for services.
Question3
Which of the following items would be considered as a prevention cost of quality?
Select one:
a. Issuing a recall of defective product before another customer is injured.
b. Performing a 24 hour burn-in on every item produced to make sure it works before it is shipped.
c. Training workers to perform their jobs.
d. Running a functional test on each item before it is boxed for shipment.

Question4
Which one of the following statements relating to quality is FALSE?
Select one:
a. A distribution of sample means has less variance than the process distribution itself.
b. A sampling plan is best for evaluating quality when inspection costs are high and destructive testing is required.
c. The distribution of sample means can be approximated by the normal distribution.
d. Sampling procedures based on measurement by variables should be used when quality specifications are complex.
Question5
Which of the following statements about the capacity cushions is FALSE?Select one:
a. Companies that have highly uncertain demand tend to have larger capacity cushions.b. Small capacity cushions are used extensively in capital intensive firms.
c. Companies that have high worker flexibility tend to have larger capacity cushions.
d. Companies that have considerable customization tend to have larger capacity cushions.
Question6
Which one of the following statements about the wait-and-see capacity strategy is FALSE?
Select one:
a. reduces the risk of overexpansion based on overly optimistic demand forecasts.
b. lags behind demand.
c. meet capacity shortfalls with overtime, temporary workers, subcontracting, and stockouts.
d. minimizes the chance of lost sales due to insufficient capacity.

Question7
The King Company is producing two types of products: A and B. Both products are produced on the same machining operation. The machines operate on two 8-hour shifts, 5 days per week, and 50 weeks
per year. The manager wants to maintain a 20 percent capacity cushion. The demand forecast, batch sizes, processing times, and setup times are given in the below table. What is the minimum number
of machines needed to meet demand?
Product A

Product B

Demand forecast (units/yr)

150,000

180,000

Batch size (units/batch)

100

40

Processing time (hr/unit)

0.3

0.15

Setup time (hr/batch)

1

1.2

Select one:
a. 24
b. 25
c. 19
d. 22
Question8
A production line that produces protein bars operates 7 days per week,with three 8-hour shifts per day. The line was designed to produce bars at a rate of 800 per hour. Last week the line produced 120,000 bars.What is the utilization of this production line?
Select one:
a. Less than 80%
b. Greater than 90%
c. Greater than 85%, but less than 90%
d. Greater than 80%, but less than 85%

Question9
The manager of a grocery store in the retirement community of Sunnyville is interested in providing good service to the senior citizens who shop in her store. Currently, the store has a separate checkout
counter for senior citizens. On average, 25 senior citizens per hour
arrive at the counter, according to a Poisson distribution, and are
served at an average rate of 30 customers per hour, with exponential
service times characteristics. On average, how long does a senior
citizen wait in line before being served?
a. More than 10 minutes, but less than 12 minutes
b. 10 minutes
c. More than 12 minutes
d. 8 minutes
Question10
A company makes four products that have the following
characteristics: Product A sells for $50 but needs $10 of materials and
$15 of labor to produce; Product B sells for $75 but needs $30 of
materials and $15 of labor to produce; Product C sells for $100 but
needs $50 of materials and $30 of labor to produce; Product D sells for
$150 but needs $75 of materials and $40 of labor to produce. The
processing requirements for each product on each of the four
machines are shown in the table.
Work centers W, X, Y, and Z are available for 40 hours per week and
have no setup time when switching between products. Market demand
for each product is 80 units per week. Using the bottleneck method, in
what sequence should products be scheduled for production? The
bottleneckmethodrefers to maximizing the contribution margin per
minute at the bottleneck for each product.
Processing Time (min/unit)
Work Center

A

B

C

D

W

6

1

3

12

X

9

7

4

8

Y

4

5

11

9

Z
Select one:
a. B,D,C,A
b. A,B,D,C
c. C,D,B,A
d. D,B,A,C

10

4

7

11

Diet Analysis

Diet Analysis

Diet Analysis

Compare your food intake against your USDA standard using the USDA MyPyramid Menu Planner.

(If you deem the information needed for this assignment to be personal, you can develop a reference individual.)

1. Type a list of foods you consume in a typical day/24 hours. List the specific name of the food consumed (i.e. ground beef, carrots, milk) and the amount consumed. There are no foods called meat, fruits, or vegetables.

Guidelines for portion sizes you can use as references:

½ cup is about 1 handful, 1 cup is about 2 handfuls
1 soda can is 12 ounces
1 teaspoon is about the size of your pinkie finger
1 tablespoon is about the size of your thumb
3 ounces of meat/fish/poultry is about the size of a deck of cards
1 ounce of cheese is about the size of a computer disc

2. Go to http://www.choosemyplate.gov/supertracker-tools/supertracker.html. You can register at any time by clicking on the ‘Register’ tab at the top of the page if you want to save your information and access it later.

A. Enter your: name, age, gender, weight, height and physical activity level. Then, click submit.

B. Enter the foods from your list of foods eaten in one 24 hour period.
Under “Start Menu Planning”:Type the name of the first food from your list. Then, click search
Click on the food from the list. (Click on Search Hint if you cannot find your food)

C. Choose the amount consumed, the No. of servings, the portion size, & the meal, & click add.
Repeat the process until all the foods have been entered for the day.


3. Answer the following questions

1. How many calories were recommended?
2. How many calories were actually consumed?
3. How many calories were recommended for “extra”
4. How many calories were “actual” in extra



4. Fill out the following chart concerning your “MyPyramid”.

Food Group Recommended Actual Approximate % Consumed
Ounces of grains
Cups of vegetables
Cups of fruits
Cups of milk
Cups of meat/beans


5. Click on Reports (at top of screen)
In Daily Menu box – click Go Now

Which food groups had “low status"

Name of Food Group with low status Name of actual food that could be added to improve the status







6. What was your intake of Sat (Saturated) Fats?
7. What was the limit of Sat fats?


Click “My Next Step” Select an area you would like to improve as your “Next Step”.

8. Name of area selected:



9. Click on “Next” box. What two steps could you implement to make a change?

a.
b.



Click Next; Click “Reports”, Click “Food Details” on Reports Page. Click “Go Now”


10. Which food that you ate had the most calories? Name of Food

Calories
11. Which food had the most saturated fat? Name of Food

Grams of saturated fat
12. What was one food you ate that was a whole grain? If none, type none. Name of Food
xxxxxxxxxxxxxxxxxx

Econ

Econ

Clothes
Food

USA
3.6
7

UK
6
2.4

USA: 72 workers
Brazil: 144 workers
(a) What would be the autarky relative price of clothes in each country? (Assuming
that in autarky conditions both products will be produced in both countries)
(b) Which good, if any, does USA have a comparative advantage in?
(c) Which good, if any, does USA have an absolute advantage in?
(d) Graph the production possibilities frontier of USA, with clothes on the X axis
(e) Graph the world supply of Clothes
(f) Suppose the level of demand for Clothes leads to both countries producing
Clothes
(i)
Draw a demand curve on the supply curve that would result in this
outcome
(ii)
What is the relative price of a piece of clothing?
(iii)
What is the relative wage of USA workers vs. UK workers
(iv)What is the real wage in USA in terms of clothes?
(v)
What is the real wage in USA in terms of food?
(vi)
Which country has gained from trade?

Topic 1: Why Bipedalism?

Topic 1: Why Bipedalism?

Topic 1: Why Bipedalism?

Please review the information on the evolution of bipedalism on the following websites:

http://humanorigins.si.edu/human-characteristics/walking

http://elucy.org/Main/LessonOverview.html

After reviewing the readings and materials for this week, please address the following questions in your posting to this topic:

1. What is bipedalism? What is habitual bipedalism? How is it different from facultative bipedalism?
2. Briefly explain one of the theories put forward by scientist for the evolution of bipedalism.
3. Based your readings, do you think that bipedalism evolved in hominins before or after an increase in brain size? In what way could brain size have been affected by bipedalism?
4. What are the earliest fossil hominins to show physical evidence of bipedalism?

Please make sure that you cite any outside resources in your answer (using APA format). 

Biostatement

Biostatement

Part 1

Read or listen to Bio Cast 21.1 Fighting Fire with Fire: The Microbial Enemy of My Microbial Enemy is My Microbial Friend, found in Chapter 20 of the website, http://wps.prenhall.com/esm_krogh_biology_3/
Read or listen to Bio Cast 31.1, Terror in the Vegetable Patch: Larvae and Spiders and Wasps, Oh My! found in Chapter 31 of the website, http://wps.prenhall.com/esm_krogh_biology_3/
Read or listen to Bio Cast 32.1, The Heat Is On: Penguins in Peril, found in Chapter 32 of the website, http://wps.prenhall.com/esm_krogh_biology_3/
Read and review the following websites
http://www.census.gov/ipc/www/idb/
http://mysteriousplaces.com/Easter_Island/html/story.html
http://www.ento.vt.edu/~sharov/popechome/welcome.html
http://www.pbs.org/wgbh/warming/
http://www.unep.org/desertification/successstories
Humans are very species-centric. We tend to focus completely on ourselves and what is best for us. After all you’ve read and viewed in this module, develop a personal biostatement by considering and answering the following
Environmental resistance will determine how many humans the Earth can support
Human needs/wants should be the only consideration for the building of new roads, housing developments, golf courses, cities, etc.
Pollution is OK if it is controlled or minimized
The greenhouse effect is not a big deal and probably temporary
Quality of human life is measured only by housing and possessions
No human should have to make sacrifices so that other species can thrive and so that our planet is not degraded
Consumption is what humans have evolved to do
The biostatement should be about three paragraphs (600 words) and should contain your own rules to live by concerning how you wish to interact with other species while on this planet. It should accurately reflect your insights after thoughtful consideration of the scientific evidence
Post your biostatement to the course Discussion Board