CTU MGM335 Phase 1 Individual Project

CTU MGM335 Phase 1 Individual Project

Task Name: 	Phase 1 Individual Project
Deliverable Length: 	5–7 slides with speaker notes of 200–250 words per slide (excluding Title and Reference slides)
Details: 	

Weekly tasks or assignments (Individual or Group Projects) will be due by Monday and late submissions will be assigned a late penalty in accordance with the late penalty policy found in the syllabus. NOTE: All submission posting times are based on midnight Central Time.

Employee morale is an essential component of a high-performing organization. Employees who are not happy with the work environment become, at best, distracted and, at worst, destructive to productivity.

Prepare a PowerPoint presentation that addresses the following elements surrounding employee morale and its effects on the workplace:

    Describe situations and organizational variables that impact employee morale.
    Explain, using examples, the impact of individual perception on morale.
    Discuss how employee empowerment and decision-making autonomy impact morale.
    Develop recommendations for initiative that organizations can implement to positively affect employee morale.

Please submit your assignment.

Social Engeneering

Social Engeneering

1. When describing Security Management mechanisms, focus and solutions are usually divided into three main categories:
Administrative Controls – Policies and Procedures
Technical Controls – System Implementations
Physical Controls; – Environmental Issues and Building Controls 
2. Now that you have the management team’s attention concerning SE and Internet Security, they have asked you to make a presentation detailing the various security categories dealing with SE. Your assignment is to create a Power-Point presentation and be sure to include and cover the following areas:
Administrative, Technical and Physical controls
Areas covered by those controls
Threats dealt with by those controls
Safeguards those controls put in place.
Also in the presentation, describe at least 3 situations or scenarios that could have an impact on each category (Administrative, Technical, and Physical). For each situation describe the threat and provide a safeguard to help protect it.

feedback systems

feedback systems

Luthans and Doh (2012) discuss feedback systems. Why is it important to consider an effective feedback system as an international manager? 150 Apa
Luthans, F., & Doh, J. P. (2012). International management: Culture, strategy, and behavior (8th ed.). New York, NY:
McGraw-Hill/Irwin. 

Define the term “science”.

Define the term “science”.

1. Define the term "science". What is the scientific method?
2. If you were to test 1000 people on the effects of vitamin C on the duration of their colds, what would be
the control? What would be the variable?
3. List five specific facts about the STRUCTURE of an atom. Be sure that these are about STRUCTURE,how the atom is constructed, what its parts are and so on, not about what it does.
4. Name some important organic molecules in living things and tell what they do. Name some important inorganic molecules in living things and tell what they do.
5. List six properties of water and tell how each affects human life.
6. Define "pH" and describe the properties of acids, bases, and salts. In your response, use the terms: hydrogen ion, hydroxide ion.
7. What is a monosaccharide? A disaccharide? A polysaccharide? A saturated fat? An unsaturated fat? Give two examples of each.
8. Name three types of nucleic acids. Name two types of proteins.
9. Describe the fluid-mosaic model.
10. How are diffusion and osmosis similar? How are they different? How is active transport similar to diffusion? How is it different?
11. Explain how the endoplasmic reticulum, the ribosomes, the Golgi apparatus, and lysosomes are related
and work together.
12. List and describe 5 additional organelles in the cell and state the function of each.
13. How do enzymes work? In your response, use the terms: substrate, product, energy, and coenzyme.
14. What are hypotonic solutions? What are isotonic solutions? What are hypertonic solutions? How would these each affect your cells?

MGMT 520 Legal, Political and Ethical Dimensions of Business

MGMT 520 Legal, Political and Ethical Dimensions of Business

MGMT 520 Legal, Political and Ethical Dimensions of Business

WEEK 1

Discussion Question 1, National and International Ethics Patent Rights (Two Responses)

Discussion Question 2, Disbarment of Lawyers

Discussion Question 3, As the pendulum swings. Ethics and the Law

WEEK 2

Assignment, Administrative Regulations (Two Papers)

Discussion Question 1, Chapter 5, Problems 5-16, 5-17

Discussion Question 2, Sources of Law and Constitutionality, Chapter 5 Problem 4 and 7

Discussion Question 3, Chapter 19, Problems 19-13, 19-18

Discussion Question 4, Too much regulation-or not enough, Chapter 6

WEEK 3

Case Nadel et V Burger King

Christopher Nadel Case

Discussion Question 1, Legal Claims and Defenses Breach of Warranty (Two Responses)

Discussion Question 2, Environmental Liability and Due Process (Two Responses)

WEEK 4

Group Project Thread

Scenario Summary

Discussion Question 1, Shirley Parker v Twentieth Century

Discussion Question 2, Larry Podder or Harry Potter (Two Responses)

Discussion Question 1, Killer Performance Requirements

WEEK 5

Discussion Question 1, Pusey v Bator

Discussion Question 2, Mr. Mapp against Gimbels Department Store Case

Discussion Question 3, The Lemon Tree Dilemma (Two Responses)

Midterm Exam 1

Midterm Exam 2

Midterm Exam 3

WEEK 6

You Decide (04 Essay Questions and Answers)

Individual Project, Scenario Summary

Discussion Question 1, Restraint of Trade and Antitrust Problem 25-14

Discussion Question 1, Price Fixing and Antitrust, Problem 16-8

Discussion Question 2, Consumer Protections (Two Responses)

WEEK 7

Discussion Question 1, Multinational Companies (Two Responses)

Discussion Question 2, SOX and Insider Trading, Problem 24-15

Discussion Question 3, SOX and Insider Trading, Problem 5 of Chapter 21

WEEK 8

Final Exam 1

Final Exam 2

Final Exam 3

Final Exam 4

Final Exam 5

I need help with the answers to these 4 questions…

I need help with the answers to these 4 questions…

I need help with the answers to these 4 questions...
1.The useful production of nuclear energy is accompanied by the production of radioactive
decay that may be considered radioactive waste products. Consider the following products of a
nuclear power plant: U-234, Th-230, Rn-222, and Ra-226. Write the nuclear equation for the
alpha decay of each nuclide.

2.The half-life of a radioactive element is important when considering its application in
medicine. For example, iodine-131 is often used in the imaging of the thyroid. The reason is that
iodine is readily absorbed by the thyroid gland. Another reason is the short half-life of iodine131. I-131 gas has a half-life of 8.0 days.

a.If you started with 5 x 1010 iodine atoms, how many are left after approximately 1
month?
b.Why is it important that there will be very few I-131 left in your thyroid after 1 month of
exposure?

1.The genetic blueprint of all living organism on Earth is encoded by DNA. That makes the
study of DNA and their interaction with the environment especially important. To determine the
possible interactions, you must first be able to recognize the functional groups that are present
in a DNA structure. List all functional groups that are commonly found in uracil, guanine,
cytosine, and tyrosine.

2.Sickle-cell anemia is a genetic defect whereby a person’s red blood cell assumes a
sickle-cell shape. This genetic defect involves the substitution of valine for glutamic acid at
position six of the ?-globin chain of hemoglobin. To understand how this can produce a defective
red blood cell, you must be able to recognize the structural differences between valine and
glutamic acid. How does the structural difference between valine and glutamic lead to the
improper folding of the hemoglobin protein?

Cytochalasin B

Cytochalasin B

Cytochalasin B strongly inhibits certain forms of cell motility, such as cytokinesis and the ruffling of growth cones, and it dramatically decreases the viscosity of gels formed with mixtures of actin and a wide variety of actin-binding proteins. These observations suggest that cytochalasin B interferes with the assembly of actin filaments. In the classic experiment that defined its mechanism, short lengths of actin filaments were decorated with myosin heads and then mixed with actin subunits in the presence or absence of cytochalasin B. Assembly of actin filaments was measured by assaying the viscosity of the solution (Fig A) and by examining samples by electron microscopy (Fig B).


A. Suggest a plausible mechanism to explain how cytochalasin B inhibits actin filament assembly. Account for the appearance of the filaments in the electron micrographs and the viscosity measurements (both the altered rate and extent).

B. The normal growth characteristics of an actin filament and the actin-binding properties of cytochalasin B argue that actin monomers undergo a conformational change upon addition to an actin filament. How so?

From the attached lab how did they calculate…

From the attached lab how did they calculate…

From the attached lab how did they calculate Reaction K’ for each of the experiments?

CHM222 Lap Report

This is an unformatted preview. Please download the attached document for the original format.
Abstract:

Background:
The rate law is the change in chemical over a change in time.
The reaction is based off of the time that it takes for the reaction to occur. The different
amounts of chemicals put into each reaction determine how long it will take for the
reaction to take place. When it comes to concentration a higher concentration of reactants
leads to more effective collisions in time. This in turn leads to an increasing reaction rate
with the exception of zero order reactions. A higher concentration of products is more
likely to be associated with a lower reaction rate. The increase in temperature is normally
accompanied by an increased reaction rate. Temperature is a measure of the kinetic
energy of a system therefore, the higher temperature the higher the average kinetic energy
of molecules and more collisions in time. Once the temperature reaches a certain point,
some of the chemical may become changed and the chemical reaction will either slow
down or stop. Catalyst enzymes lower the activation energy of a chemical reaction. They
also increase the rate of a chemical reaction without being consumed in the process. They
work by increasing the frequency of collisions between reactants, thus altering the
orientation of reactants so that more collisions are effective. This reduces the
intermolecular bonding within reactant molecules. The activation energy can be
determined through the temperature because the drop in the relative rate versus the time
is significant. The Arrhenius Equation
y=mx+b because temperature is the

lnk=lnA?(Ea/kBT)

relates

to

independent

the

slope

variable

and the rate constant is the dependent variable, thus replacing with the equation above.

The temperature should be plotted on the x- axis and the rate constant shall be plotted on
the y- axis. The line will have appeared constant, then appear to drastically decrease then
rise again. The clock reaction records the amount of time it takes for each solutions
reaction to occur. It helps to create the ratio between the rate of change and the time. The
starch indicator allows the solution to show that a reaction is actually taking place. the
hydrochloric acid is detected by the starch indicator.

Procedure:

Results:
Dependence of Reaction Rate on Concentration

Time t
Reaction

Relative

(sec) for

Rate of

Reactant Concentrations in Reacting
Temp. in ( ? )
C

Mixture

Reaction

Change
1
2
3
4
5

Color to

1000/t

160
76
101
45
193

6.25
13.15
9.90
22.22
5.18

Mixture (M)

.0020
.0040
.0020
.0020
.0016

.008
.004
.016
.008
.004

.02
.02
.02
.04
.03

21.0
21.0
25.0
23.0
25.0

Effect of Temperature of Reaction Rate: The Activation Energy

20

Approximate Temperature in C
?
40

10

0

Time in t in seconds
144

58

299

258

21

33

17

12

6.85
1.92
294
1/294

1.78
.576
306
1/306

14.6
2.68
290
1/290

21.5
3.07
285
1/285

for color to appear
Temperature of the
reaction mixture in C
?
Relative Rate = 1000/t
Ln of relative rate
Temperature T in K
1/T, K

Effect of a Catalyst on Reaction Rate

Reaction 1

Catalyzed Reaction 1

Time for color to
144

7.8

7.8

appear (seconds)
Relative Rate 1= 7.59 = k’ (.002) m (.008) n (.02) p
Relative Rate 2= 16.95 = k’ (.004) m (.008) n (.02) p
Reaction
1Rate 1/ Relative Rate 2 = (.002)m(.008)n(.02)p4
2
3
K’ave
Relative
/(.004)m(.008)n(.02)p
K’
3.125
6.575 = log (.5)/ log (.5)
4.95
11.11
3.66
m
m=1
m= 1
n= 1
p= 2

Discussion:
During the clock reaction the student combined the contents of Reaction Flask I and
Reaction Flask II, which contained the two component solutions for the reaction mixture,
and observed that after a period of elapsed time. The concentration of the various ions in
the solution affected the time in which the color change occurred. When the
concentration of [ I- ] ion increased the time for the detected color change was nearly
halved. The increase in concentration of the BrO3- ion also resulted in a decreased time,
but not to the same degree as the I- ion. Finally, the increase in concentration of the H+
had the most profound decrease in the time required for the color change. These elapsed
times translated into higher relative rates with smaller amounts of time and smaller
relative rates with larger amounts of time demonstrating the inverse proportionality
between reaction time and relative rate. These determined relative rates are crucial to the
determination of the rate laws and there order numbers. The students compared Reaction
1 to the Reaction 2, 3, and 4 to obtain the order numbers because Reaction Mixture 2, 3,

and 4 only differ from Reaction 1 in concentration of one ion. This ratio of difference
was used to find the order numbers to be m=1, n=1, and p=1. With these value known the
students were able to predict the relative rate and time for Reaction 5. The predicted
relative rate was 5.56 and the predicted time was 180 seconds. This was slightly
inaccurate when compared to the observed relative rate of 5.18 and the observed time of
193 seconds. Now in addition to the calculation of the relative rate and order numbers
the students also determined the rate constant for each of the performed reactions. To
determine this order numbers were input into the formula Relative Rate = k’ (I-) m (BrO3-)
n

(H+) p and then solved for k’. The resulting constants were, with the exception of

Reaction 4, within a close range of one another. This was expected because the solutions
were only slightly different from one another. All of this information was used to
determine the activation energy of the reaction. This was achieved when the students
plotted 1/T versus the ln of the relative rate. Using this graph in conjunction with the
Arrhenius equation the activation energy could be calculated by relating the slope and the
rate constant of 8.31. This yielded activation energy of 4,615 joules. When compared to
the actual value of the 41,400 joules the experiment yielded a percent error of 88 percent.
The source of this error came from an erroneous reading and/or preparation of one of 40
degree trial. This caused the slope to be significantly higher than anticipated which
resulted in smaller activation energy. Finally, when a catalyst was added to one of the
solutions and reacted together the rate of reaction increased dramatically. This was due to
the presence of the catalyst which decreased the activation energy required for the
reaction to occur.
Conclusion:

The goal of the project was to find the time it took to for a chemical reaction to take
place. The group was somewhat successful in achieving each goal. The rates of the
chemical reactions are within the same time frame. The more concentrated the solution,
the longer it took for the reaction to take place. The experiment does not need to be
improved however, the whole experiment needs to be repeated twice in order to make
sure all the results are completely accurate.

References

Cengage Learning (2000); Signature Labs’ Chemistry
Handout; Rate of Chemical Reactions; II. A Clock Reaction; p160-165
General Chemistry; Gilbert, Kirss, Foster, Davies

Lab Report 3:
Rate Law Experiment
Jeneé T. Glover
Due: Mar. 21, 2013
CHEM 222L-01

Additional Requirements 
Level of Detail: Show all work

Inventory management

Inventory management

A company uses 36,000 tyres to produce car wheels every year. The company can make its own tyres simultaneously at a rate of 500 per day and the carrying cost is £2 per tyre per annum. If the company is open for 240 days of the year and each production run incurs a set-up cost of £40, what is:

    Economic production quantity
    Total annual set-up and carrying cost
    Cycle time for economic production quantity
    Run time