Ethics and Corporate Responsibility

Ethics and Corporate Responsibility

Ethics and Corporate Responsibility
You are to show evidence of your research by providing a literature review of three resources you will be using for your final paper. In addition, you will be asked to provide a trial introduction for your paper.

So, what is a review of the literature?

A research review is an account of what has been published on a topic by accredited scholars and researchers. Sometimes it is part of the introduction to an essay, research report, or thesis. In writing the research review, your purpose is to convey to your reader what knowledge and ideas have been already written about a topic, and what their strengths and weaknesses are. As a piece of writing, the research review must be defined by a guiding concept (e.g., your research objective, the problem or issue you are discussing, or your argumentative thesis). It is not just a descriptive list of the material available and/or a set of summaries.

This project enhances your knowledge about the topic and helps you gain skills in the following areas.

information seeking: the ability to review the literature efficiently, using manual or computerized methods, or to identify a set of useful articles and books
critical appraisal: the ability to apply principles of analysis to identify unbiased and valid studies or reviews.
A research review should do the following:

be organized around and related directly to the thesis or research question you are developing
synthesize results into a summary of what is and is not known
identify areas of controversy in the literature
formulate questions that need further research 

chapt4 exercise 1

chapt4 exercise 1

chapt4 exercise 1
AlwaysRain Irrigation, Inc., would like to determine capacity requirements for the next four years. Currently two production lines are in place for making bronze and plastic sprinklers. Three types of sprinklers are available in both bronze and plastic: 90-degree nozzle sprinklers, 180-degree nozzle sprinklers, and 360-degree nozzle sprinklers. Management has forecast demand for the next four years as follows:

Yearly Demand
1 (in 000s)	2 (in 000s)	3 (in 000s)	4 (in 000s)
Plastic 90	 32	 44	 55	 56 
Plastic 180	 15	 16	 17	 18 
Plastic 360	 50	 55	 64	 67 
Bronze 90	 7	 8	 9	 10
Bronze 180	 3	 4	 5	 6
Bronze 360	 11	 12	 15	 18

Both production lines can produce all the different types of nozzles. The bronze machines needed for the bronze sprinklers require two operators and can produce up to 12,000 sprinklers. The plastic injection molding machine needed for the plastic sprinklers requires four operators and can produce up to 200,000 sprinklers. Three bronze machines and only one injection molding machine are available. What are the capacity requirements for the next four years? (Assume that there is no learning.)

chapt6 exeercise 113

1.	Francis Johnson’s plant needs to design an efficient assembly line to make a new product. The assembly line needs to produce 15 units per hour and there is room for only four work-stations. The tasks and the order in which they must be performed are shown in the following table. Tasks cannot be split and it would be too expensive to duplicate any task
Task	Task time (minutes)	Immediate Predecessor
A	1	-
B	2	-
C	3	-
D	1	A, B, C
E	3	C
F	2	E
G	3	E
a.	Draw the precedence diagram
b.	What is the workstation cycle time?
c.	Balance the line so that only four workstations are required. Use whatever method you feel is appropriate.
d.	What is the efficiency of your line balance?

economic integration

economic integration

2 1/2 pages double spaced - APA format - There is no room for plagiarism in this essay. Please be original and provide at least on reference. This is an Essay.

Choose one economic integration (such as EU, EEA, EFTA, CUBKR, etc.) and create a table that shows advantages and disadvantages.

Next, include a text summary describing how an organization can still succeed given the disadvantages (strategy of international business)

MGT 4027 Week 6 Global Business Management Final Project

MGT 4027 Week 6 Global Business Management Final Project

EDUS has decided to acquire the institution and needs to establish a management team, faculty and support personnel. In this week’s portion of the final project, you will research and present information related to human resources areas of interest: staffing; training and development; performance appraisals; and compensation.

Topics for research and analysis

Staffing: Identify needed skills of employees and managers. Compare the use of ethnocentric, polycentric, and geocentric approaches to staffing. Consider what mix of U.S. and employees from the country will be needed. Analyze what might be the best reporting structure to use and how to establish leadership positions. What are the implications for recruiting and selection of employees located in the country?

Training and Development: List needed topics and instructional methods for ongoing training and management development related to technical skills, interpersonal skills, language, and cultural awareness. Consider who will require training, by whom and on what topic. How will the institutional knowledge about EDUS be transferred to the institution’s employees, staff and faculty members?

Performance Appraisals: Suggest performance guidelines that would balance organizational goals and individual needs, and which would reflect the cultural and legal situation. Should U.S. managers conduct appraisals on staff and faculty located in the foreign country? What type of performance appraisals would be best to implement?

Compensation: Determine suggested wages and salary levels for various job positions on the campus based on country factors. Propose an employee benefits package for the local staff and faculty members based on economic and cultural factors.

Recommended Actions: Recommend EDUS actions related to HR-related issues. Provide evidence to support your recommendations.

Conclusions: Draw conclusions about the material you have presented. The opinions or judgments you present should be supported by your research.

case questions from zara

case questions from zara

case questions from zara

ZARA QUESTIONS
1.	Was Galicia/Spain a good place to start a company like ZARA? How well does ZARA’s advantage travel globally?
2.	What do you think of ZARA’s past international strategy?
a.	Past strategy for product/market selection
b.	Mode of entry
c.	Standardized marketing
3.	With which international competitors should we compare ZARA’s financial results? Why? What do comparisons tell us about Inditex’s relative operating economics? Relative capital efficiency?
4.	How specifically do the distinctive features of ZARA’s business model affect its operating economics? Specifically compare ZARA with an average retailer with similar posted prices.
a.	You can make the simplifying assumption that on average retail selling prices are twice manufacturers’ prices
5.	Why might ZARA fail? How sustainable is its competitive advantage relative to those pursued by other apparel retailers? In Resource-Based View of the firm, terms, what is its
a.	Durability over time
b.	Replicability by other companies
c.	Transferability to other situations
6.	What is the best way to grow the ZARA chain? Construct a SWOT-TOWS Matrix to support your position.
a.	How do you see prospects in the Italian market?
b.	What do you think about focusing on Europe vs. making a commitment to a second region?
7.	What advice would you give to CEO Castellano?

Good purchasing strategy

Good purchasing strategy

1.	True or False Good purchasing strategy is based on standardized set of procedures for dealing with every supplier in a firm’s supply base.

2.	True or False Service reliability involves logistical quality. 


3.	True or False The work of logistics is all about transportation planning and execution. 

4.	True or False Procurement and manufacturing are an integral part of integrated logistics. 

5.	
6.	True or False The goal of cycle synchronization is achievement of planned time performance. 

7.	True or False Perfect orders are limited to firms committed to integrated supply chain management.

8.	True or False It is very possible that the supplier which offers the lowest purchase price does not have the lowest total cost of ownership for the buying firm.

9.	True or False The logistics value proposition is based solely on cost 
minimization.

10.	True or False Performance Cycle variance is a prime determinate of safety stock 

11.	True or False A company has decided that it no longer needs to extensively count and inspect the products it buys from a particular supplier. This suggests that the buying company has is in the volume consolidation stage of developing procurement strategy.




Student Name____________________

Multiple Choice

1.	In procurement, Total Cost of Ownership includes all of the following except:
A. field failures of purchased items
B. consideration of the impact of supplier quantity discounts
C. cost of order placement
D. In fact, total cost of ownership includes all of the above. 

2.	Collaboration is the act of:
A – Sharing secret information
B – Working with competitors
C – Integrating a supply chain
D – Legal in selected supply chain arrangements


3.	What is dwell time:
A – A key component of system design
B – The ratio of asset idle time to total time required to complete a mission
C – The total time inventory is waiting to be processed.
D – A key concept in manufacturing efficiency

4.	The work of logistics involves:
A – Order processing, inventory, and manufacturing
B – Inventory, transportation, manufacturing and procurement
C – Manufacturing, customer accommodation, and purchasing
D – Transportation, inventory, order processing, warehousing, and facility 
network design

5.	What is the primary reason that time to market has decreased over the past two decades:
A – Improvement in Federal Highways
B – Better Sea Ports
C – Development of Double Stack Containers
D – Information Technology

6.	A unique feature of integrated logistics is:
A – The newness of the concept
B – It is fundamental similar to military operations
C – Complexity and scope of operations
D – The fact that it employees many people.




Student Name____________________


7.	Generally speaking, procurement can have a greater impact on the net income of a company than most other departments. This is due to the fact that:
A. manufacturing relies on purchasing to identify high quality suppliers
B. suppliers want to reduce their prices to their customers
C. marketers don’t care about net income
D. purchased materials and supplies frequently represent the largest costs in a company

8.	A logistics performance cycle is:
A – A format for improved measurement of cost and service.
B – The basic unit of supply chain design and operational control
C – Is an important form of transportation measurement
D – Is typically echeloned	

9.	A Supply Chain is best described by which of the following:
A – A group of cooperative carriers
B – A group of collaborative companies
C – A formal association of competitive companies
D – Two firms who create a strategic alliance

10.	Service reliability is best described as:
A – The measure of availability that is most critical in system design
B – Deals with speed and consistency of order cycle performance.
C – The quality dimension of logistics performance
D – The key attribute of transportation integration


11.	Basic logistics service is a concept that:
A – Describes the level of service provided all established customers
B – Is involved in designing a network
C – Only involves availability
D – None of the above

HIS101 – Modern World History Module 4 – Case

HIS101 – Modern World History Module 4 – Case

What were the Tanzimat Reforms and were they effective in allowing the Middle East to catch up to the West? 

HIS101 - Modern World History
Module 4 - Case
Challenges in the Middle East and Africa, 1800-1912
         
By the early 18th century, the Ottoman Empire which ruled the  Middle East was in decline. Weak rulers left the way open for power struggles between officials, religious experts, and Janissaries (Guards). Provincial administrators and landholders colluded to drain revenue from the central treasury. The general economy suffered from competition with the West as imported goods ruined local industry. European rivals took advantage of Ottoman weakness. The Austrian Habsburgs pushed the Ottomans from Hungary and the northern Balkans. The strengthened Russian state expanded into the Caucasus and Crimea. The subject Christian peoples of the Balkans challenged their rulers: the Greeks won independence in 1830, Serbia in 1867. By the 1870s, the Ottomans had lost nearly all of the Balkans, and their capital was often threatened by Balkan or Russian armies.
Faced with difficult challenges and the disintegration of the Ottoman Empire, Sultan Mahmud II initiated a set of reforms. Mahmud’s successors followed with the Tanzimat, or “reorganization,” a sweeping set of reforms designed to modernize and Westernize the Ottoman Empire. 
Every Islamic people or state had a different experience with Western influence according to its particular circumstances and history---wholesale emulation and adoption of Western ideas and institutions.  This reaction is best exemplified by Muhammad Ali, pasha of Egypt from 1805–1849 and Mahmoud II, whose Tanzimat reforms modernized the Ottoman government, but failed to produce an economically sound or politically powerful state. 
In this Case Study, we will look at the Tanzimat Reforms and their effectiveness.
Read the information in the background material, look for more information, and then write a 3 to 5 page paper answering the following question: 
What were the Tanzimat Reforms and were they effective in allowing the Middle East to catch up to the West?
Case Assignment Expectations:
 In Module 4 Case Assignment, you are expected to:
•	 Describe the purpose of the paper and conclusion.
•	 Answer the case assignment questions clearly and provide necessary details.
•	 Provide a quality argument; that is, no poor sentence structure, no spelling and grammar mistakes or run-on sentences.
•	Provide citations to support your argument and references on a separate page. 

Columbia Journalism Review study – FBI in plea to identify masked IS man in video

Columbia Journalism Review study – FBI in plea to identify masked IS man in video

 A Columbia Journalism Review study found that 90% of news stories originated or were influenced by PR professionals. If you consider that the average newspaper is 70% advertising and 30% editorial content, one begins to wonder what exactly you're buying.

Take a look at today's local paper and see if you can identify stories that were somehow initiated or influenced by PR. To help you, consider the following: Were quotes from press releases and spokespeople, or were they directly from people important to the story? Was the story in the newspaper because of a planned public relations event or news conference? Was information “intentionally leaked” from “anonymous” sources close to the situation?