Review the PharmaCARE/CompCARE scenario in Assignment 2 to complete this assignment. Review the PharmaCARE/CompCARE scenario in Assignment 2 to complete this assignment. Question Review the PharmaCARE/CompCARE scenario in Assignment 2 to complete this assignment.Write a ten to twelve (10-12) page paper in which you:Research three to five (3-5) ethical issues relating to marketing and advertising, intellectual property, and regulation of product safety.Argue for or against Direct-to-Consumer (DTC) marketing by drug companies.Determine who regulates compounding pharmacies under the current regulatory scheme, what the Food and Drug Administration (FDA) could / should have done in this scenario, and whether the FDA should be granted more power over compounding pharmacies.Decide whether PharmaCARE’s use of Colberian intellectual property would be ethical in accordance with:UtilitarianismDeontologyVirtue ethicsEthics of careYour own moral / ethical compassAnalyze the way PharmaCARE uses U.S. law to protect its own intellectual property while co-opting intellectual property in Colberia.Suggest at least three (3) ways the company could compensate the people and nation of Colberia for the use of its intellectual property and the damage to its environment.Compare PharmaCARE’s actions with those of at least one (1) real-world company whose creativity in skirting legal technicalities led to ethical lapses and financial loss.Determine the success PharmaCARE and WellCo shareholders would have in suits against the companies.Determine whether or not PharmaCARE lives up to its brand. Support the response.Recommend at least three (3) changes PharmaCARE can make to be more ethical going forward.Use at least three (3) quality resources in this assignment. Note: Wikipedia is not an acceptable reference and proprietary Websites do not qualify as academic resources.
explains how technology has affected the communication capabilities of specialized databases in the crim explains how technology has affected the communication capabilities of specialized databases in the crim Question Prepare a 1,050- to 1,750-word paper that explains how technology has affected the communication capabilities of specialized databases in the criminal justice system.Include the following in your paper:A comparison of AFIS and Facial recognitionOverall positive effect due to new technologiesOverall negative effect due to new technologiesA discussion about which new specialized technologies you might want to use and whyFormat your paper consistent with APA guidelines and with a minimum of 2 or more references.
Gb580 unit 1 discussion Gb580 unit 1 discussion Question This is important information that will ensure that you earn maximum points. Your professionally written postings should provide substantive depth that advances the discussion. Also, please be sure to edit your posts for grammatical errors before you post.For Units 1–3, you will be choosing a company’s product or service to analyze. Please use the same company for each of these discussions.Consider focus, divergence, and a compelling tagline (pp. 39–41 Blue Ocean Strategy) and Figure 1-3 (p. 7Strategy A View From the Top). Choose a well-known company and one of its products or services and analyze how well you believe they have employed these three concepts in the strategy for the product or service. For example, if you believe they have focused adequately, explain why. If you believe they lack adequate focus, recommend changes that you believe will improve the strategy, and explain why.
Accounting Multiple Choice Questions Accounting Multiple Choice Questions Question PDF Corp. needs to replace an old lathe with a new, more efficient model. The old lathe was purchased for $50,000 nine years ago and has a current book value of $5,000. (The old machine is being depreciated on a straight-line basis over a ten-year useful life.) The new lathe costs $100,000. It will cost the company $10,000 to get the new lathe to the factory and get it installed. The old machine will be sold as scrap metal for $2,000. The new machine is also being depreciated on a straight-line basis over ten years. Sales are expected to increase by $8,000 per year while operating expenses are expected to decrease by $12,000 per year. PDF's marginal tax rate is 40%. Additional working capital of $3,000 is required to maintain the new machine and higher sales level. The new lathe is expected to be sold for $5,000 at the end of the project's ten-year life. What is the incremental free cash flow during year 1 of the project?Answera. $12,800b. $14,400c. $11,400d. $15,200 Free cash flows represent the benefits generated from accepting a capital-budgeting proposal.Answera. Trueb. False Project C requires a net investment of $1,000,000 and has a payback period of 5.6 years. You analyze Project C and decide that Year 1 free cash flow is $100,000 too low, and Year 3 free cash flow is $100,000 too high. After making the necessary adjustmentsAnswera. the payback period for Project C will be longer than 5.6 years.b. the payback period for Project C will be shorter than 5.6 years.c. the IRR of Project C will increase.d. the NPV of Project C will decrease. Jiffy Co. expects to pay a dividend of $2.00 per share in one year. The current price of Jiffy common stock is $20 per share. Flotation costs are $1.00 per share when Jiffy issues new stock. What is the cost of internal common equity (retained earnings) if the long-term growth in dividends is projected to be 6 percent indefinitely?Answera. 10.60 percentb. 16.00 percentc. 16.53 percentd. 16.60 percent Zellars, Inc. is considering two mutually exclusive projects, A and B. Project A costs $75,000 and is expected to generate $48,000 in year one and $45,000 in year two. Project B costs $80,000 and is expected to generate $34,000 in year one, $37,000 in year two, $26,000 in year three, and $25,000 in year four. Zellars, Inc.'s required rate of return for these projects is 10%. The profitability index for Project A is;Answera. 1.47.b. 1.22.c. 1.13.d. 1.08. A company has preferred stock with a current market price of $18 per share. The preferred stock pays an annual dividend of 4% based on a par value of $100. Flotation costs associated with the sale of preferred stock equal $1.50 per share. The company's marginal tax rate is 40%. Therefore, the cost of preferred stock is;Answera. 28.80%.b. 24.24%.c. 22.22%.d. 14.55%. Which of the following should be included in the initial outlay?Answera. taxable gain on the sale of old equipment being replacedb. first year depreciation expense on any new equipment purchasedc. preexisting firm overhead reallocated to the new projectd. increased investment in inventory and accounts receivable If depreciation expense in year one of a project increases for a highly profitable company,Answera. net income decreases and incremental free cash flow decreases.b. net income increases and incremental free cash flow increases.c. the book value of the depreciating asset increases at the end of year one.d. net income decreases and incremental free cash flow increases.
ACC – Werth Company asks you to review its December 31, 2012 ACC – Werth Company asks you to review its December 31, 2012 Question Werth Company asks you to review its December 31, 2012, inventory values and prepare the necessary adjustments to the books. The following information is given to you. 1. Werth uses the periodic method of recording inventory. A physical count reveals $307,471 of inventory on hand at December 31, 2012. 2. Not included in the physical count of inventory is $13,640 of merchandise purchased on December 15 from Browser. This merchandise was shipped f.o.b. shipping point on December 29 and arrived in January. The invoice arrived and was recorded on December 31. 3. Included in inventory is merchandise sold to Bubbey on December 30, f.o.b. destination. This merchandise was shipped after it was counted. The invoice was prepared and recorded as a sale on account for $16,755 on December 31. The merchandise cost $9,621, and Bubbey received it on January 3. 4. Included in inventory was merchandise received from Dudley on December 31 with an invoice price of $20,460. The merchandise was shipped f.o.b. destination. The invoice, which has not yet arrived, has not been recorded. 5. Not included in inventory is $11,179 of merchandise purchased from Minsky Industries. This merchandise was received on December 31 after the inventory had been counted. The invoice was received and recorded on December 30. 6. Included in inventory was $13,663 of inventory held by Werth on consignment from Jackel Industries. 7. Included in inventory is merchandise sold to Sims f.o.b. shipping point. This merchandise was shipped after it was counted. The invoice was prepared and recorded as a sale for $24,740 on December 31. The cost of this merchandise was $15,080, and Sims received the merchandise on January 5. 8. Excluded from inventory was a carton labeled “Please accept for credit.” This carton contains merchandise costing $1,964 which had been sold to a customer for $3,403. No entry had been made to the books to reflect the return, but none of the returned merchandise seemed damaged. (a) Determine the proper inventory balance for Werth Company at December 31, 2012. Inventory balance as on December 31, 2012 $ (b) Prepare any correcting entries to adjust inventory to its proper amount at December 31, 2012. Assume the books have not been closed. (If no entry is required, select "No entry" for the account titles and enter 0 for the amounts. Credit account titles are automatically indented when amount is entered. Do not indent manually.) No. Account Titles and Explanation Debit Credit 1. 2. 3. 4. 5. 6. 7. 8. Accounts Payable Accounts Receivable Allowance to Reduce Inventory to LIFO Cash Cost of Goods Sold Inventory Inventory Over and Short No Entry Prepaid Insurance Purchase Discounts Purchase Discounts Lost Purchase Returns and Allowances Purchases Sales Returns and Allowances Sales Revenue Work-in-Process
Clean sweep company produces all-vinyl mats. Each doormat calls for .5 meter of vinyl material Clean sweep company produces all-vinyl mats. Each doormat calls for .5 meter of vinyl material Question Clean sweep company produces all-vinyl mats. Each doormat calls for .5 meter of vinyl material. The material should cost $3 per meter. Standard direct labor hours and labor cost per doormat are .3 hour and $6 (.3 X$20 per hour). Currently the standard variable overhead rate is $1.5 per direct labor hour, and its standard fixed overhead rate is .8 per direct labor hour.In August, the division manufactured and sold 50,000 doormats. Duing the month, it used 25,200 meters of vinyl material; the total cost of the material was $73,080. The total overhead costs for August were $28,200, of which $18,200 was variable. The total number of direct labor hours worked was 10,800 and the factory payroll for direct labor for the month was $214,920. Budgeted fixed overhead for August was $9,280. Normal monthly capacity for the year was set at 58,000 doormats. , Attachments (29.82 KB)
ACC – How a company might overstate performance and why it can occur ACC – How a company might overstate performance and why it can occur Question Write a 3-4 page APA format paper on how a company might overstate performance and why it can occur. Also, discuss how an off-balance sheet financing can make a company appear less risky. Be sure to include 2 resources.
james LaGrande had recently been appointed controller of the breakfast cereals division of a major food company james LaGrande had recently been appointed controller of the breakfast cereals division of a major food company Question james LaGrande had recently been appointed controller of the breakfast cereals division of a major food company. One of Jim's first assignments was to prepare the financial analysis for a new cold cereal, Krispie Krinkles.Mr. LaGrande discussed the product with the food lab that had designed it, with the market research department that had tested it, and with the finance people who would have to fund its introduction. After putting all the information together, he developed the following optimistic and pessimistic sales projections:OptimisticPessimisticYear 1$1,800,000$1,000,000Year 23,800,0001,400,000Year 35,200,0001,200,000Year 48,200,0001,000,000Year 510,200,000600,000The optimistic predictions assume that the introduction of a popular product is successful. The pessimistic predictions assume that the product is introduced but does not gain wide acceptance and is terminated after 5 years. LaGrande thinks that the most likely results are halfway between the optimistic and pessimistic predictions.LaGrande learned from finance that this type of product introduction requires a predicted rate of return of 16% before top management will authorize funds for its introduction. He also determined that the contribution margin should be about 50% on the product, but could be as low as 42% or as high as 58%. Initial investment would include $3 million for production facilities, $2.5 million for advertising and other product introduction expenses, and $1.5 million for working capital (e.g., inventory). The production facilities would have a value of $800,000 after 5 years.Prepare a capital-budgeting analysis to determine whether to launch the product.
Operations management Chapter 8 – Linear program problem Operations management Chapter 8 – Linear program problem Question A large retailer is planning to open a new store. Three locations in California are currently under consideration: South Coast Plaza (SCP), Fashion Island (FI), and Laguna Hills (LH). Transportation costs for the locations and costs, demands, and supplies for existing locations and warehouses (origins), are shown below. Each of the locations has a demand potential of 300 units per week. Which location would yield the lowest transportation costs for the system?
Maths – Misc. Problems Maths – Misc. Problems Question 1. Eagle Credit Union (ECU) has experienced a 10% default rate with its commercial loan customers (that is, 90% of commercial loan customers pay back their loans). ECU has developed a statistical test to assist in predicting which commercial loan customers will default. The test assigns either a rating of “Approve” or “Reject” to each loan applicant. When applied to recent commercial loan customers who paid their loans, the test gave an “Approve” rating in 80% of the cases examined. When applied to recent commercial loan customers who defaulted, it gave a “Reject” rating in 70% of the cases examined. a. Use this data to construct a joint probability table.b. What is the conditional probability of a “Reject” rating given that the customer defaulted?c. What is the conditional probability of an “Approve” rating given that the customer defaulted?d. Suppose a new customer receives a “Reject” rating. If they are given the loan anyway, what is the probability that they will default? 3. A soft drink machine can be regulated (discharge level m) so that it dispenses an average of m ounces per cup. If the ounces of fill are normally distributed with mean m and standard deviation equal to 0.3 ounces. Find the setting of the discharge level m so that eight ounce cups will overflow only one percent of the time. 6. The United States Golf Association requires that the weight of a golf ball must not exceed 1.62 oz. The association periodically checks golf balls sold in the United States by sampling specific brands stocked by pro shops. Suppose that a manufacturer claims that no more than 1 percent of its brand of golf balls exceeds 1.62 oz. in weight. Suppose that 24 of this manufacturer’s golf balls are randomly selected, and let X denote the number of the 24 randomly selected golf balls that exceed 1.62 oz. a. Find the probability that none of the randomly selected golf balls exceed 1.62 oz.?b. Find the probability that at least one of the randomly selected golf balls exceeds 1.62 oz.c. Suppose that two of the randomly selected golf balls are found to exceed 1.62 oz. Do you believe the claim that no more than 1 percent of this brand of golf balls exceed 1.62 oz. in weight? 7. Owing to several major ocean oil spills by tank vessels, Congress passed the 1990 Oil Pollution Act, which requires tankers to be designed with thicker hulls. Further improvements in the structural design of a tank vessel have been implemented since then, each with the objective of reducing the likelihood of an oil spill and decreasing the amount of outflow in the event of hull puncture. To aid in this development, J.C. Daidola reported on the spillage amount and cause of puncture for 50 recent major oil spills from tankers and carriers. The file OilSpill.sgd contains the data for the 50 spills reported. a. Is any one cause more likely to occur than any other? Justify the answer using hypothesis tests.b. Construct a 90 percent confidence interval for the difference between the mean spillage amount of accidents caused by collision and the mean spillage amount of accidents caused by fire/explosion. Interpret the result.c. Can we say that the mean spillage amount of accidents caused by grounding is the same as the corresponding mean of accidents caused by hull failure?d. State any assumptions required for the inferences derived from the analyses to be valid. Are these assumptions reasonably satisfied?e. Is the variation in spillage amounts for accidents caused by collision the same as the variation in spillage amounts for accidents caused by grounding? Q. The probability of a vehicle having an accident at a particular intersection is 0.0001. Suppose that 10,000 vehicles per day travel through the intersection. a. What is the probability of no accidents occurring?b. What is the probability of two or more accidents? Q. A manufacturer of commercial television monitors guarantees the picture tube for one year (8760 hours). The monitors are used in airport terminals for flight schedules, and they are in continuous use with power on. The mean life of the tubes is 20,000 hours, and they follow an exponential time to failure density. It costs the manufacturer $300 to make, sell and deliver a monitor that will be sold for $400. It costs $150 to replace a failed tube, including materials and labor. The manufacturer has no replacement obligation beyond the first replacement. a. What is the manufacturer’s expected profit? b. Competition is forcing the manufacturer to consider an extended time beyond the first year to replace a tube if it fails. How long should the manufacturer guarantee the tubes if it wants to earn an expected net profit margin of 20 percent?