Multiple Choice Questions

Multiple Choice Questions

Question


1. You're an employee in accessories of a department store. A customer complains about your lack of silk scarves after she saw an advertisement in the newspaper. You are unable to provide a tangible restitution as you aren't management. Knowing the concept of procedural fairness, what else could you do to satisfy your customer?

A. Make a note to the manager in front of the customer about the lack of merchandise.
B. Offer a rain check.
C. Call other stores to see if it is in stock and direct the customer to the other store.

2. Which of the following statements about the use of scent to change or augment the atmospherics in a store is true?

A. The gender of the target market should be used to determine the intensity of the scent.
B. There are no ethnic differences in the way scents are received and decoded.
C. The methods used to introduce scent into a store are relatively expensive.

3. Marcel works in the linen department of a large department store. When a customer arrived Friday morning to pick up a Thanksgiving tablecloth she had specially ordered, she was disappointed to find deliveries were late, and the cloth had not yet arrived. She was planning to use it at a Thanksgiving gathering at her home this weekend. Marcel was able to use empowerment to bridge the _______ gap by offering to bring the tablecloth to her home himself as soon as it arrived at the store.

A. research
B. knowledge
C. delivery

4. Which of the following statements about the location of departments within retail department and discount stores is true?

A. Because many customers turn left when entering a store, the left side is especially desirable floor space.
B. The best locations on any floor are those that are closest to the store's entrances, main aisles, escalators, and elevators.
C. In general in a multilevel store, space's value increases the further it is from the entry-level floor.


5. When Karen went to Amazon.com, based on her past purchases, the site asked her if she was interested in a new book by Deepak Chopra. It also asked her if she wanted to be reminded when new books by Chopra or authors of similar books became available. Karen was even able to review her past purchases. All of these unique customer services enable Amazon.com to

A. differentiate itself from other retailers of books.
B. combat the problems associated with service intangibility.
C. prevent price comparisons with other electronic retailers of books.


6. Which of the following does not describe appropriate space management?

A. A retailer over allocates space to some low productivity categories such as milk because an extensive assortment in these categories attracts customers to the store and positively affects the sales of categories with higher GMROIs.
B. Less is allocated to fast selling merchandise to allow more shelf space to encourage sales of slower moving items.
C. A retailer over allocates space to categories purchased by their platinum customers, the customers with the highest lifetime value.


7. Glamour Shots uses makeup and clothes to try to make each of its customers look attractive. Then it takes photos of these individuals. It makes money by selling these photos. Since each individual is different, End of exam each makeover is different as is each camera shoot. Glamour Shots uses a/an _______ approach to customer service.

A. standardization
B. individualized retailing
C. personalization


8. Why is it important for stores to be designed with flexibility in mind?
A. It's less expensive for retailers to build several different types of flexible fixtures than to build one inflexible fixture.
B. Stores with flexible designs can respond to market changes without large-scale renovations.
C. Customers find it hard to locate merchandise if fixtures are rigid.


9. Which of the following is not considered an objective to be met when designing a store?
A. The design should recognize the needs of the disabled.
B. The design should be inexpensive.
C. The design should be flexible.

Economics Test Bank with Solution

Economics Test Bank with Solution

Question

1) Diseconomies of scale occur when
a. long-run average total costs rise as output increases.
b. long-run average total costs fall as output increases.
c. average fixed costs are falling.
d. average fixed costs are constant.

2. Calculate the monopolist's profit under the following conditions. The intersection of the marginalrevenue and marginal cost curves occurs where output is 10 units. At an output of 10 units, themonopoly price is $20 per unit, the marginal cost is $12 per unit, and the average variable cost is $4per unit, and average fixed cost is $8 per unit.
a. $120
b. $100
c. $80
d. $60

3. Marginal revenue is equal to price for a competitive firm because

a. Total revenue increases by less than the price of the good when an additional unit is sold
b. Firms need to lower price to increase the quantity sold
c. Firms can increase price and still increase the quantity sold
d. Total revenues increases by more than the price of the good when an additional unit is sold
e. Individual firms do not affect the market price of the good when they increase the quantity theyproduce.

4. Which of the following statements is false?
a. In the long run, there are no fixed costs.
b. Marginal cost is independent of fixed costs.
c. Economies of scale is a short-run concept.
d. Diminishing marginal product explains increasing marginal cost.

5. Refer to the above graph. The firm is making a __________ of ___________
a. profit; $88
b. loss; $88
c. profit; $8
d. loss; $8
e. profit; $16

6. A firm's output is 80 units, its MC is $44, its ATC is $43, and its AFC is $10. AVC is
a. Increasing
b. Decreasing
c. Constant
d. Not enough information

7. Table 1 presents the cost schedule for Lauren's cookies. If Lauren produces 4 figs, Lauren's fixed costsare
a. $0.
b. $100.
c. $190.
d. $50.

8. Table 1 presents the cost schedule for Lauren's Cookies. If Lauren produces five figs, Lauren'smarginal costs are
a. $40.
b. $50.
c. $150.
d. $650.
e. None of the above.

9. The marginal cost curve intersects the
a. ATC, AVC, and AFC curves at their minimum points
b. ATC and AFC at their minimum points
c. AVC and AFC at their minimum points
d. ATC and AVC at their minimum points

10. Assume that a competitive constant-cost industry is in long-run equilibrium when market demandsuddenly increases. Which of the following statements is correct?
a. Existing firms will start suffering losses in the short run
b. Existing firms will stop producing in the short run if AVC exceeds AR at the profit maximizing outputlevel
c. Some firms will exit the industry in the long run
d. Market supply will shift to the right in the long run

Table 2
Price per unit Output
$8
600

$7
$6
$5
$4
$3
$2
$1

800
1000
1200
1400
1600
1800
2000

11. Suppose that Sam L. is a monopolist in the donut market, which has the demand shown in Table2.When Sam L. increases output from 800 to 1000 units, what happens to Sam L.’s revenues?
a. Revenues increase by $200
b. Revenues increase by $400
c. Revenues decrease by $200
d. Revenues increase by $1000
e. Revenues do not change

12. A firm is deciding whether to produce or shut down in the short run. Its total costs are $20,000 ofwhich $5,000 are the total fixed costs of production. The firm should produce in the short run as longas its total revenues are at least
a. $0
b. $15,000.
c. $10,000.
d. $5,000.
13. Which of the following is true for a profit maximizing firm in a competitive market in the long run butnot true for a monopolist?
a. MC=MR
b. MC=P
c. AR=P
d. Only one firm exists

14. Refer to Table 2. Sam L. remains a monopolist in the donut market. Suppose Sam L.’s marginal cost of
producing each donut is constant and equal to $2. Sam L. will maximize his profits by charging a priceof
a. $20
b. $4
c. $5
d. $6
e. None of the above

15. In the short run, when price is below average total cost, a firm in a competitive market will
a. Shut down and incur the loss of both variable and fixed costs
b. Continue to operate as long as average revenue exceeds marginal cost
c. Continue to operate as long as average revenue exceeds average variable cost
d. Always exit the industry

16. Assume that the Law of Diminishing Marginal Product applies at the current output level of acompetitive firm. The price is $20 and, at the current output level, marginal cost is $22 and averagetotal cost is $21. To maximize profits the firm should:
a. produce the current output level
b. produce more
c. produce less
d. any of the above is possible, without further information.
17. A competitive firm might choose to set its price above the market price, because
a. this would result in higher average revenue.
b. this would result in higher profits.
c. this would result in lower total costs.
d. None of the above is correct.
18. The practice of selling the same goods to different customers at different prices, but with the samemarginal cost, is known as
a. price discrimination.
b. monopoly pricing.
c. arbitrage.
d. price segregation.

19. A firm's average variable cost is $80, its total fixed cost is $6,000, and its output is 600 units. Itsaverage total cost must be:
a. less than $80.
b. $80
c. $90
d. more than $90.

20. Which is a true statement?
a. Diseconomies of scale and diminishing marginal products are two ways of stating the same thing.
b. Economies of scale is a short-run concept, and diminishing marginal product is a long-run concept.
c. Constant returns to scale is a short-run concept, and diminishing marginal product is a long-runconcept.
d. None of the above.

Long Problems –

21. The market for gilders is initially competitive and the market demand is: P ? 231? 0.9QD . Thecombined marginal costs of the firms in the gilder industry are:MC ? 11? 0.2Q.
a. Graph the market demand and MC curves, and indicate the MR curve for the firms in the gilderindustry below. How much is produced in the industry and what is the price of gilders?
b. What are consumer surplus and producer surplus in the market
c. What is the DWL, if any, for this market?
d) Now suppose that one company buys out all of the firms in the gilder market, but has the samecombined MC. Draw the monopolist’s MR on your original graph above. How much does themonopolist produce and what price do they charge?
e. What are CS and PS with the monopoly?
f. What is the DWL, if any, with the monopoly?

Ethics mcq

Ethics mcq

Question

1.) Usually an ethical dilemma can be resolved with a satisfactory answer to the problem.

TRUE

FALSE

2.) The first step in resolving an ethical dilemma is to analyze the consequences.

TRUE

FALSE

3.) Due to aggressive competitors, Joe Smith feels pressured to lie to an important customer to keep the customer. He feels they will never discover the truth. With this ethical dilemma, the first thing Joe must do is analyze the actions without thinking about consequences.

TRUE

FALSE

4.) The final step in solving an ethical dilemma is to evaluate the results of your decision.

TRUE

FALSE

5.) Arthur Dobrin identified 15 questions you should consider when resolving an ethical dilemma.

TRUE

FALSE

6.) The process of ethical reasoning involves looking at the available information and then drawing conclusions based on that information in relation to our own ethical standards.

TRUE

FALSE

7.) Preconventional is the lowest level of Lawrence Kohlberg's stages of ethical reasoning.

TRUE

FALSE

8.) The first stage of Lawrence Kohlberg's stages of ethical reasoning is preconventional.

TRUE

FALSE

9.) The third stage of Kohlberg's stages of ethical reasoning is law and order.

TRUE

FALSE

10.) In the third stage of Kohlberg's stages of ethical reasoning, a person is focused on meeting the expectations of friends and coworkers and how something will affect their life.

TRUE

FALSE

11.) Because of the Sarbanes-Oxley Act, today, when employees are asked to do something that conflicts with their own personal values, seldom is the guidance from companies a series of clichés.

TRUE

FALSE

12.) "Do what's legal" is an ethical cliché.

TRUE

FALSE

13.) Over the last four decades, corporate ethics has remained in the organizational mainstream.

TRUE

FALSE

14.) In resolving a truth versus loyalty dilemma, you must decide whether the decision will have short-term or long-term consequences.

TRUE

FALSE

15.) In resolving a justice versus mercy dilemma, you must answer whether you perceive the issue as a question of dispensing justice or mercy.

TRUE

FALSE

16.) An ethical dilemma is a situation in which there is a "right" versus "right" answer.

TRUE

FALSE

17.) Once you have reached a decision as to the type of conflict you are facing, the three resolution principles are: ends-based, rules-based, and the Golden Rule.

TRUE

FALSE

18.) If you utilize the rules-based resolution principle, you would consider which decision would provide the greatest good for the greatest number of people.

TRUE

FALSE

19.) If you utilize the Golden Rule resolution principle, you would utilize the principle: do unto others as you would have them do unto you.

TRUE

FALSE

20.) Andrew Young's statement, "Nothing is illegal if a hundred businessmen decide to do it" is one of the commonly held rationalizations that can lead to misconduct.

TRUE

FALSE

21.) The accounting function is the certification of an organization's financial statements as being accurate.

TRUE

FALSE

22.) Internal auditors provide counsel for improving controls, processes and procedures, performance, and risk management.

TRUE

FALSE

23.) The accounting profession is governed by a set of laws and established legal precedents.

TRUE

FALSE

24.) GAAP are accepted principles utilized as standard operating procedures within the industry.

TRUE

FALSE

25.) GAAP, like any operating standard, are open to interpretation and abuse.

TRUE

FALSE

26.) Corporations try to manage their expansion at a steady rate of growth.

TRUE

FALSE

27.) When corporations grow too quickly or steadily from year to year, investors may see them as in danger of falling behind their competition.

TRUE

FALSE

28.) It is legal to defer receipts from one quarter to the next to manage your tax liability.

TRUE

FALSE

29.) A set of accurate financial statements that present an organization as financially stable, operationally efficient, and positioned for strong future growth can do a great deal to enhance the reputation and goodwill of an organization.

TRUE

FALSE

30.) When a company's financial statements have been certified by an objective third party to be "clean," that certification is meant to be for the company's benefit.

TRUE

FALSE

31.) A situation where one relationship or obligation places you in direct conflict with an existing relationship or obligation refers to value chain interest.

TRUE

FALSE

32.) Ethical CSR is the purest or most legitimate type of CSR in which organizations pursue a clearly defined sense of social conscience in managing their financial responsibilities to shareholders, their legal responsibilities to their local community and society as a whole, and their ethical responsibilities to do the right thing for all their stakeholders.

TRUE

FALSE

33.) Ethical CSR is the purest or most legitimate type of CSR.

TRUE

FALSE

34.) Altruistic CSR is a philanthropic approach to CSR, in which organizations underwrite specific initiatives to give back to the company's local community or to designated national or international programs.

TRUE

FALSE

35.) Economic CSR is the purest or most legitimate type of CSR.

TRUE

FALSE

ACCt – Problem 3-1A & 3-5A -Rite-Shop

ACCt – Problem 3-1A & 3-5A -Rite-Shop

Question

3-1A
Rite-Shop
Biweekly
Taxable
Wages

Employee
No.
Employee Name
711
512
624
325
422
210
111

Castro, Manny

$493.28

Corrales, Pat

$
Total Taxable
Wages

Employer's HI Tax

$

$

$

$

870.00

Guitar, Joseph
Moore, Connie
Morrison, Harry
Robertson, Catherine
Swarez, Joseph
Totals

Employer's OASDI

FICA Taxes
OASDI 4.2%

$

419.80
523.20
1,100.00
950.00
489.75
$

$
Employer's OASDI
Tax
$

Total Taxable
Wages

Employer's HI
Tax

HI 1.45%

November 15

Annual Salary
Name and Title

OASDI
Taxable
Earnings

OASDI Tax

HI Taxable
Earnings

HI Tax

December 31

Annual Salary
Name and Title

OASDI
Taxable
Earnings

OASDI Tax

HI Taxable
Earnings

HI Tax

To determine break-even point (BEP), managers must examine

To determine break-even point (BEP), managers must examine

Question To determine break-even point (BEP), managers must examine the fixed and variable costs (expenses) in relation to returns. When expenses and revenues are even, this is known as the BEP. An accurate BEP for a product or service can help managers make modifications to increase profitability, assess the risk of a venture or choose between two viable options.
To complete the assignment for this module, read the following scenario:
The Executive Education Group (EEG) is a for-profit provider of non-degree short-courses for the general local population of middle- and senior-managers, mainly of two-day duration, with an occasional one-day course.
EEG has three people on permanent staff promoting and administering the programs, with annual salaries of $200,000 per annum in total. They have two seminar rooms in which to run their programs, and together with their offices, they have a total floor space which costs them $150,000 per annum.
Occasionally, EEG is asked to develop proposals for delivering tailored two-day programs ‘in-house’ for specific organizations. Costs involved with promoting and delivering such programs have been estimated as being:
• Where local presenters are used, fees payable to presenters are $1,200 per day
• Where special presenters are brought in from overseas (averaging 20% of all courses run), presenter fees are $2,000 per day, with the additional costs of travel and accommodation (averaging $2,000 per program)
• Participant folders and materials cost $20 per participant
• Lunches are provided, with preparation and cleanup being contracted out – the provider has agreed to a contract that specifies a fixed cost per lunch per day of $200 plus $10 per participant
• End-of-program drinks are usually held at the end of a program, costing $200 for the wine and associated ‘finger-food’
• Twice each year there is a general mail-out advising the up-coming schedule of programs, and this costs $5,000 each time
• Programs generally have a price to participants of $500 per day where local presenters are used, and $600 per day where interstate or overseas presenters are used

Required:

Looking directly at the fixed costs attributable to each program, calculate the break-even point in terms of number of participants per program for the following two scenarios –
a) Where overseas presenters are used (averaging 20% of all courses run)
b) Where no overseas presenters are used
c) Briefly comment on what these two results might suggest.


a) Assuming no overseas presenters are used during the year, and 30 courses run during the year, how many participants are required per course for EEG to break even after allowing for ALL its costs?
b) Briefly comment on what the results for part 1 and part 2 might suggest

FIN – Huffman Trucking

FIN – Huffman Trucking

Question


Huffman Trucking
Balance Sheet
(Unaudited)

December 31st
2011 2010
(In Thousands)

Assets
Current Assets
Cash & Cash Equivalents $89,664 $58,003
Accounts Receivable 51,869 81,557
Prepaid Expenses & Supplies 6,267 5,529
Total Current Assets $147,800 $145,089

Carrier Operating Property (at cost) $85,306 $81,461
Less: Allowance for Depreciation (69,536) (67,119)
Net Carrier Operating Property $15,770 $14,342

Assets of Discontinued Operations 7,516 8,739
Goodwill (net) 49,852 49,852
Other Assets 46,327 37,306
Total Assets $267,265 $255,328


Liabilities and Shareholders' Equity
Current Liabilities
Accounts Payable $40,843 $45,381
Salaries & Wages 37,299 33,014
Current Portion of Long-Term Debt 1,752 1,343
Freight & Casualty Claims Payable 10,389 9,697
Total Current Liabilities $90,283 $89,435

Long-Term Liabilities
Accrued Pension & Post-Retirement Health Care $64,058 $58,672
Long-Term Debt 7,307 6,562
Total Long-Term Liabilities $71,365 $65,234

Shareholders' Equity
Common Stock ($1.00 par value Authorized: 20,000,000 shares) $3.882 $3.882
Treasury Shares (1.952) (1.952)
Retained Earnings 105,615 100,657
Total Shareholders' Equity $105,617 $100,659

Total Liabilities and Shareholders' Equity $267,265 $255,328


o
Huffman Trucking
Statement of Income
(Unaudited)

December 31st
2011 2010
(In Thousands)

Revenue $1,109,295 $969,240

Operating Expenses
Salaries, Wages & Benefits $406,191 $367,993
Fuel Expense 318,737 258,904
Operating Supplies and Expenses 117,670 105,875
Purchased Transportation 138,140 114,250
Operating Taxes & Licenses 19,033 17,753
Insurance & Claims 11,995 12,493
Provision for Depreciation 3,009 2,773
Total Operating Expenses $1,014,775 $880,041

Operating Income form Continuing Operations $94,520 $89,199

Interest Expense $466 $768
Tax Expense 34,887 32,923
Net Income $59,167 $55,508

 

Calculate the Solvency Ratio *Debt to total assets *Times interest earned

Kali Manufacturing Inc

Kali Manufacturing Inc

Question

Here is your graded assignment for Week 2. There are two problems to complete, worth 10 points each. The full assignment is worth 20 points.

You may want to work several of the exercises from our chapter readings this week to start. In addition, work several problems from this week's chapters in the gradedWorkout Room thread before attempting the Homework assignments. We will review several problems throughout the week in the workout room.

Please DO NOT click on the Begin Homework button below until you are ready to answer ALL questions, and please SHOW all your work when applicable!

Problem 1:

Kali Manufacturing Inc. began the year with the following.

Units
Beginning work-in-process20,00020% complete
Transferred to finished goods60,000
Ending inventory10,00070% complete

Materials added at the beginning of the process

Required

Calculate the equivalent units for

  1. material costs under the weighted average process cost method;
  2. conversion costs under the weighted average process cost method;
  3. material costs under the FIFO process cost method; and
  4. conversion costs under the FIFO process cost method.

Problem 2:

Glass Company manufactures a product through a continuous single-step process. All materials are added at the beginning of processing. Production and cost data for the company for the current month are as follows.

Production Dataunits
In process, beginning of month (20% converted)2000
Started during current month8000
Completed and transferred to finished goods5500
In process, end of month (60% converted)2500
Manufacturing Costs
Work in process, beginning$21,450
Materials$54,000
Direct labor cost$105,000
Factory overhead cost$42,840

Miller Design Studio-acct100

Miller Design Studio-acct100

Question Under the first requirement at the bottom of page 178, you are directed to look at pages 116 and 119 for the adjusting entries to be reversed. These should be pages 112 and 115 respectively.
Under the August 8th transaction listing in the middle of page 178, the instructions are confusing and incorrect. They should state: "Completed the series of designs that began on July 31 for which $1,400 cash was received in advance on July 19. The accrued revenues were adjusted on July 31st for the $800 of work that was completed and accepted during July."

The July 31, 2011, post-closing trial balance for the Miller Design Studio is
on the next page.
COMPREHENSIVE Problem: Miller Design Studio
Chapter Assignments 177

178 CHAPTER 4 Completing the Accounting Cycle
During August, the studio engaged in these transactions:
Aug. 1 Received an additional investment of cash from J. Miller,
$20,000.
2 Purchased additional office equipment with cash, $4,700.
7 Purchased additional office supplies for cash, $540.
8 Completed the series of designs that began on July 31 and billed
for the total design services performed, including the accrued revenues
of $800 that had been recognized in an adjusting entry in
July, $1,400.
12 Paid the amount due for the office equipment purchased last
month, $3,000.
13 Accepted an advance in cash for design work to be done,
$2,400.
15 Performed design services and received a cash fee, $2,900.
16 Received payment on account for design services performed last
month, $2,800.
19 Made a partial payment on the utilities bill that was received and
recorded at the end of July, $140.
20 Performed design services for Rave Department Stores and
agreed to accept payment next month, $3,200.
21 Performed design services for cash, $1,160.
22 Received and paid the utilities bill for August, $900.
23 Paid the assistant for four weeks’ wages, $4,800.
26 Paid the rent for September in advance, $1,600.
30 Paid cash to J. Miller as a withdrawal for personal expenses,
$2,800.
Required
1. Record entries in journal form and post to the ledger accounts the optional
reversing entries on August 1 for Wages Payable and Accounts Receivable
(see adjustment for unrecorded wages on page 116 and adjustment for design
revenue on page 119). (Begin the general journal on page 5.)
2. Record the transactions for August in journal form.
3. Post the August transactions to the ledger accounts.
4. Prepare the Trial Balance columns of a work sheet.
Miller Design Studio
Post-Closing Trial Balance
July 31, 2011
Cash $22,480
Accounts Receivable 5,000
Offi ce Supplies 3,660
Prepaid Rent 1,600
Offi ce Equipment 16,320
Accumulated Depreciation–Offi ce Equipment $ 300
Accounts Payable 6,280
Unearned Design Revenue 600
Wages Payable 720
J. Miller, Capital 41,160
$49,060 $49,060

5. Prepare adjusting entries and complete the work sheet using the information
below.
a. One month’s prepaid rent has expired, $1,600.
b. An inventory of supplies reveals $2,020 still on hand on August 31.
c. Depreciation on equipment for August is calculated to be $300.
d. Services performed for which payment had been received in advance
totaled $1,300.
e. Services performed that will not be billed until September totaled $580.
f. Wages accrued by the end of August, $720.
6. From the work sheet, prepare an income statement, a statement of owner’s
equity, and a balance sheet for August 31, 2011.
7. Record the adjusting entries on August 31, 2011, in journal form, and post
them to the ledger accounts.
8. Record the closing entries on August 31, 2011, in journal form, and post
them to the ledger accounts.
9. Prepare a post-closing trial balance at August 31, 2011.
Chapter Assignments 179

,
Attachments
(564 KB)

HCAD 4354 – Economics for Healthcare

HCAD 4354 – Economics for Healthcare

Question


Industry Analysis Term Paper
1. Purpose
The purpose of this term paper is to provide each student with the opportunity to apply economic analysis to a U.S. healthcare related industry and to learn how to deal with business problems from an economic perspective. There are five industries related to U.S. healthcare for choices:
• private health insurance
• physician services
• hospital services
• pharmaceutical
• long-term care
Students are supposed to choose one among the five choices to develop analysis paper for the industry in the U.S. operation.

2. Defining the Industry
It is very important to define the industry precisely; otherwise, there will be a tremendous amount of unrelated data available. The U.S. Standard Industrial Classification (SIC) system has been replaced by the North American Industry Classification System (NAICS) (you can find them trough any website search engine). These codes are widely adopted for record keeping purposes and are often used to index private publication such as market guides, directories of companies, and periodical indexes. Familiarize yourself with the SIC/NAICS categories. Remember: it is important to either narrow or broaden your industry definition based on how much information you are finding.

3. Data Collection
For any strategic planning process, it is important to understand the industry in which you are or will be operating, for without an understanding of that industry, your strategy is unlikely to succeed. Every manager must determine for him/herself the information required to address the decision at hand. In an increasingly competitive and dynamic business environment, success depends on a continuous updating of information on market trends, competitors, and customers.

There are two types of data that can be collected and analyzed: (a) primary data collected from government record; (b) secondary data collected from reference materials. Prior to conducting any primary research, savvy managers know that secondary research should be the starting point in the data collection process. The government and other agencies publish a great deal of information which
can be invaluable in an industry assessment, and which is readily available if you know where to look. While you may not be able to find out everything you need to know, secondary information is an essential management tool. The sources of this information are abundant (in printed documents, via the Internet, etc.), however, they are not always easy to find. Your first challenge is to know where to look and find the most current, relevant, accurate, and reliable information, in a timely manner, when there are so many sources to choose from and investigate. Data must be current, reliable, unbiased, accurate, and relevant to the problem at hand if they are to be useful to the manager. Good managers
rely on this information to make decisions that are based on the realities of the marketplace, not their opinions or conjectures. Decisions based on information, however, are only as good as the information itself.

Description. This is to be a general introduction to the particular industry. What does the industry produce? What is SIC/NAICS code and description? (4%)
History. A brief history. How has the organization of and the nature of competition in the industry evolved from its earliest beginnings? (3%)

Organization. What parts of the chain of production/service do the firms undertake themselves and what do they buy from outside suppliers or pass on to independent distributors or retailers? (3%)
Relevant governmental or environmental factors. What role does government play in the industry? How does (will) regulation or other government (future) policy (e.g. reform, trade policy …etc.) affect the industry? (5%)

IV. Market Structure (1 page): 10%
You need to answer the following two questions precisely:
A. How can the market structure of the industry best be characterized: perfect competition, monopolistic competition, oligopoly, or monopoly?
Briefly go over the market characteristics to confirm your definition here. (5%)
If your industry is competitive, your article should address at least one of the following: large number of firms, a low market share of the firms in a market, low barriers to entry (e.g., the small size of firms that have entered), product/service that is relatively homogeneous (indistinguishable among
competitors), and the availability of many substitutes or foreign competition, marginal cost pricing (pricing at the cost of producing an extra item), lack of market power (in other words, price taking, not price making), rapid adoption of new technologies, and the responsiveness of production to increased
profitability, low long-run profits in the market, low or constantly falling prices, adequate availability of commodity, efficient utilization of a firm's capacity (price is at minimum average cost), and efficient resource utilization (price equals marginal cost).
If your industry is oligopoly or (near) monopoly, your article should address at least one of the following: few firms in the market close to a 100 percent market share of the firms, blockaded entry or high barriers to entry, existence of economies of scale, product/service that is unique when compared with anything produced by anyone else, the lack of substitutes or foreign competition, lack of entry, the ability to set prices for the market (price making), price discrimination, reliable long-run profits in the market; excessively high or rising prices; inadequate availability of commodity and even shortages; inefficient utilization of a firm's capacity (price far above average cost); inefficient resource utilization (price above the marginal cost of resources).
B. How many major firms (up to top four if applicable) are there in the industry and what is their market share? A table showing the market shares in the U.S. is required here. (5%)

V. Industry Demand (1~2 pages): 15%

A. What are the key determinants of the market demand in your chosen industry? (10%)
B. Describe the current change (at least one) in the determinants that has caused the demand change. (5%)

You may want to think about the following factors: population and demographic changes, new regulation (reform), income and wealth trends, consumer tastes and preferences, prices of substitutes and complements in consumption, introduction of new substitutes or complements in consumption,
expectations about the future prices of this particular good/service. In general, your insight in this section will determine significantly the quality of paper.

VI. Cost Structure (1 page): 10%
You need to answer the following two questions precisely:
A. What are the key determinants of an existing firm’s (1) fixed costs and (2) variable costs in the short-run? (5%)
B. What is the shape of the existing firm’s (1) average cost cure and (2) marginal cost curve (i.e. U-shaped or L-shaped)? A graph illustration here will be a plus. (5%)

VII. SWOT Analysis (1 page): 10%
SWOT analysis is a structured planning method used to evaluate the Strengths, Weaknesses, Opportunities, and Threats involved in a business venture. A SWOT analysis involves specifying the objective (i.e. profit growth) of the business venture and identifying the internal and external factors that are favorable and unfavorable to achieve that objective. Setting the objective should be done after the SWOT analysis has been performed. This would allow achievable goals or objectives to be set for the organization. Please choose one of the top 4 firms in the industry to analyze the firm’s
objective of profit growth:

Strengths: characteristics of the firm that give it an advantage over others

Weaknesses: are characteristics that the firm at a disadvantage relative to others
Opportunities: external chances to improve performance (e.g. make greater profits) in the environment
Threats: external elements in the environment that could cause trouble for the firm

Please summarize the analysis in a SWOT Matrix. The following matrix serves as an example:

VIII. Analysis of Competitive Forces (Porter's five forces) (2 pages): 20% Please consider each of the following five forces for the industry. In the beginning of each force, please highlight the force as “strong”, “moderate” or “weak”.
A. The threat of entry by new competitors (4%)
For example, those industries with high entry barriers, such as pharmaceutical manufacturing, will have fewer firms entering. With fewer firms, there is less environmental complexity, and it is easier for one firm to begin to dominate the industry. Economic rents are usually higher in such an environment and entry becomes more attractive. For industries with a low barrier to entry, such as the physician service, new service providers come and go with great rapidity. This prevents dominance by
any one, or a few, firms. Economic rents are usually low.
B. The intensity of rivalry among existing competitors (4%) What are the current top firms and their market shares in the U.S.? How they compete (i.e. price or quality)? Any alliance or particular strategy is practiced now for competition? An industry characterized by high rivalry is unattractive because it limits the ability to achieve above normal economic rents. At the other extreme, industries with no rivalry are usually dominated by a few major firms which could limit strategic flexibility.
C. Pressure from substitute products (4%)
Are the industry’s products/services differentiated and, if so, according to what characteristics (design, function, price range, geographic market, etc.)? How innovative is the industry, and what are the sources of innovation? An industry will be attractive if there is no threat from substitute products. A substitute is any product or service that will fulfill the same need while using a different technology. The relevance is that substitutes can render obsolete the present capital investment of the industry.
D. The bargaining power of buyers (4%)
First, determine who the buyers are. What are the channels of distribution for the industry? Do not only consider the ultimate consumers unless there are no intermediaries. Identify significant macro-environmental trends, such as changes in customer demographics, needs, wants, lifestyle, etc.
that have/will positively/negatively affect the industry. Do buyers have strong power over firms to negotiate price in this industry? How the power is exercised?
E. The bargaining power of suppliers (4%)
What are the markets for inputs (labor, machinery, capital, raw materials, etc.) like? While we were concerned about threats in the "entrants" section, here we are concerned with power. Do suppliers have power over firms in this industry? The first step is to determine what this industry purchases. Not in detail, but as a generalization. Focus on suppliers of key items that firms in this industry must have. Would firms have access to labor on favorable terms? Does this industry have unions? If so, they limit
access to labor and usually increase costs. Do firms in this industry require highly skilled knowledge workers? How is the present labor market for this industry?

IX. Conclusion (1 page): 10%
Your analysis should lead you to reasonable conclusions. You have, by now, discovered a number of factors. State what you consider to be the opportunities and threats for this industry. Support your final argument as to whether this industry will be more profitable; or, what managerial strategies of profit growth for existing firms should be most effective. Make sure that  conclusion/recommendation and executive summary are consistent. Do not just repeat the sentences in the previous sections.

X. References: 3%
Please list the references that you cite, but also a listing of the material that contributed to your body of knowledge.

XI. Appendices (Optional)
Here you might put your tables, charts, or anything else that you think is important to an understanding of this industry.

trident MAT101 module 3 case study and slp

trident MAT101 module 3 case study and slp

Question module 3 case study and SLP

Assignment Expectations

The case assignment will assess your knowledge of the module content through a series of graded problems. The Case is available as a Word file.

Click to open the Case Assignment. Click to open the Case Answer Template to insert your work and answers.

Please use the Case Answer Template file for preparing your assignment. You can open the file, save it with your own filename, and insert your work and answers below each problem. Clearly indicate every answer by highlighting it; Answer: y=2


module 3 slp


Assignment Expectations

The SLP assignment will expand your knowledge and understanding of the module using a series of word problems and applications on the topics. The SLP is available as a Word file.

Click to download the SLP assignment. Click to open the SLP Answer Template to insert your work and answers.

Please use the SLP Answer Template file for preparing your assignment. You can open the file, save it with your own filename, and insert your work and answers below each problem. Clearly indicate every answer by highlighting it; Answer: y=2