Blog

BUS508 Week 10 Discussion and Journal

BUS508 Week 10 Discussion and Journal

Question

"Financial Management” Please respond to the following:

From the case study and e-Activity, determine whether or not you agree with Meg Whitman’s approach for Hewlett-Packard to spend more funds on research and development, rather than on continued acquisitions. Provide a rationale for your response.

From the scenario, rate the recommendations that Tammy Partridge made to expand product lines at the current production facility and to take the company public in order to provide additional capital for expansion of the business (1 meaning that you highly disagree with her recommendations; 5 meaning that you highly agree with her recommendations). Determine whether or not the recommended approaches seem to be viable. Provide a rationale for your response.

Journal Entry 9:Prepare a one to two (1-2) paragraph journal entry that examines your learning experiences with ORION in Week 10 of this course that addresses the following:

Determine the primary manner in which ORION has increased your business knowledge in the related subject area.

Discuss specific challenges that you may have experienced with any of the subject matter presented, and point out the areas for which you would like more information.

Suggest at least two (2) possible applications of this week’s material to the company that you currently work for or hope to work for in the future.

ACC460 Problem 5-11

ACC460 Problem 5-11

Question


P. 5-11
Nonexchange expenditures are the mirror image of nonexchange revenues.
A state government provided several grants to school districts and local governments during its fiscal year ending August 31.
1. On August 1, 2012, it announced a $2 million grant to a local school district for the purchase of computers. The district can spend the funds upon receipt. On September 15, 2012, the state mailed a check for the full amount to the district. The district spent $1.5 million on computers during fiscal 2013 (i.e., the year ending August 31, 2013) and expects to spend the remaining $0.5 million in fiscal 2014.
2. On the same date the state announced a $10 million grant to another school district for the acquisition of equipment. However, per the provisions of this grant thestate will make payments only upon receiving documentation from the district that it has incurred allowable costs. In fiscal 2013, the district incurred and documented allowable costs of $8 million. Of this, the state paid only $7 million, expecting to reimburse the district for the balance early in fiscal 2014.
3. The state also announced a $5 million grant to a third school district, again for the acquisition of computers. The state will make annual five $1 million payments to the district, starting on September 15, 2013. The district is required to expend the funds in the fiscal year in which they are received.
4. Toward the end of fiscal 2013, it awarded a $500,000 contract to the accounting department of a local university to support a review of the state’s cost accounting system. The department intends to carry out the review during 2014 and issue its final report to the state in early 2015. Upon announcing the award, the state made an advance payment of $100,000 Solution to Exercise for Review and Self-Study 221 to the department. It intends to pay the balance when the department completes the project to the satisfaction of the state.
a. Prepare the journal entries that the state would make in fiscal 2013 to record the awards in an appropriate governmental fund. Briefly justify the amount of expenditure that you recognized.
b. What, if any, adjustment to the amount of expenditure recognized would the state have to make in
preparing its government-wide statements?
c. Describe briefly how the recipients would account, in both fund and government-wide statements for
the awards. 

General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products.

General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products.

Question

General Mills (NYSE: GIS) is a large manufacturer and distributor of package consumer food products. Benoit Gagnon, a buy-side analyst covering General Mills, has studied the historical growth rates in sales, earnings, and dividends for GIS, and also has made projections of future growth rates. Gagnon expects the current dividend of 1.10 per share to grow at 6 percent for the next two years, and that the growth rate will decline to 3 percent and remain at that level thereafter.

The risk-free rate is 4%, the market risk premium is 6%, and GIS’s beta, assumed to be 0.50.

Required:

Compute the value of one share of GIS stock using Dividends Valuation Approach.


Shady Sunglasses operates retail sunglass kiosks in shopping malls. Below is information related to the company:

(dollar amounts in thousands)

2014

2015

2016

2017

2018

2019

Net Cash Flow from Operations

564

628

854

1059

1345

1655

Interest Expense after tax

122

134

148

145

155

148

Decrease (Increase) in Cash Required for Operations

-75

-54

-48

-32

-61

-48

Net Cash Flow from Investing

-287

-300

-310

-285

-294

-277

Net Cash from Debt Financing

210

204

140

85

-40

-46

Present Value Factors (Re = 8.5%)

0.922

0.849

0.783

0.722

0.665

Common Shares Outstanding

in thousands

1,512

Required:

1. Using the above information and assuming that steady-state growth of FCFE in year 2019 and beyond will be 4%, calculate Shady Sunglasses’ current stock value per share using FCFE valuation model. Remember to adjust the present value for midyear discounting.

2. Using the above information and assuming that steady-state growth of FCFF in year 2019 and beyond will be 4%, and WACC = 8.5%, compute Shady Sunglasses’ current firm value per share using FCFF valuation model. Remember to adjust the present value for midyear discounting.

Business statistics problems

Business statistics problems

Question 1. Assume you have data set from a normally distributed random variable. Answer the following questions:
a. Will the random variable be discrete, continuous, or neither? How do you know?
b. Will the data be qualitative or quantitative? How do you know?

2. A university has been tracking the percentage of alumni giving to its annual fund each year for the past 10 years. The data is given below:

14% 13% 15% 21% 19% 24% 25% 28% 25% 31%

Answer the following questions:
a. What are its mean and media?
b. What is the procedure for using mean and median to determine whether the data is
skewed, and if so, in what direction?
c. Apply the procedure you described to the mean and median computed in part a.

3. Under which of the following conditions would be appropriate to use a Binomial random
variable? In each case, explain why your answer is correct.

a. A department will interview 10 candidates for a position, and call back for second
interviews those who answer the interview questions to the satisfaction of all the
interviewers. They hope to call back at least 3, but past experience suggests an
average of about 1 call back per 4 interviews.
b. A factory posts on the wall the number of days since its last safety infraction or
injury. In the past year the factory has had a safety infraction or injury on 6 different
days. The factory is interested in the number of days that can be expected to elapse
without an injury.

4. The mean time for a race car driver's crew to perform a pit stop is 13.2 seconds, with
a standard deviation of 0.9 seconds. To maintain his current lead, the driver needs a
pit stop in 12.5 seconds or less. Assuming this random variable is normally distributed,
what is the probability of the driver getting the pit stop in a short enough time to maintain
his lead?

5. a random sample for the population of registered voters in California is to be taken and
then surveyed about an upcoming election. What sample size should be used to guarantee
a sampling error of 3% or less when estimating p at the 95% confidence level?

6. An elementary school teacher learned that 40% of school children have at least three
cavities. The teacher has 30 students in his class. How many students would he expect
in his class to have at least three cavities? What is the standard deviation? Using the
appropriate approximation, determine P(x>20); that is, the probability that more that
20 students in his class will have 3 cavities.

Economics 3B03— Assignment 3

Economics 3B03— Assignment 3

Question

Answer all questions.
1. Consider an economy in which the demand for electricity isqd = 100pwhere qd is the quantity demanded and p is the price measured in dollars.There are two sources of electricity supply: nuclear power and renewablepower (wind and solar). The supply curves of these two sectors areqn = 2pqr = p
where qn and qr are the quantities supplied by the nuclear and renewablesectors.
(a) Suppose that there is no government intervention. Find the equilibrium price of electricity. Find the quantity sold by the nuclear sectorand the quantity sold by the renewable sector. Find consumer surplus, the producer surplus of the nuclear sector, the producer surplusof the renewable sector, and total surplus.
(b) Now imagine that the government, wishing to encourage renewablepower, introduces a new policy. It will pay the renewable sectora price of $40 for electricity. It will purchase from the renewablesector as much electricity as the sector is willing to sell at this price,and then resell it at the market price. Find the new market (orequilibrium) price. Find the quantity sold by the nuclear sector andthe quantity sold by the renewable sector. Calculate the cost of theprogram to the government. Find consumer surplus, the producersurplus of the nuclear sector, the producer surplus of the renewablesector, and total surplus.
2. Assume that the demand for electricity isq D = 1202pD
where q D and pD are the quantity demanded and the price paid by buyers. As before, there are two kinds of electricity providers, nuclear andrenewable. The supply curve for renewable power isqR = pS
R
1
where qR and pS are the quantity supplied and the price received by sellersRin the renewable sector. The supply curve for nuclear power isqN = 2pSN
where qN and pS are the quantity supplied and the price received byNsellers in the nuclear sector.
(a) Assume that there is initially no government intervention in the market for electricity. Find the total surplus in the market for electricity.
(b) Now imagine that the government places a tax of $1 on each unit ofelectricity generated by the nuclear sector, and simultaneously placesa subsidy of $2 on each unit of electricity generated by the renewable
sector. The tax is paid by the …rm, and the subsidy is received bythe …rm. Find the welfare cost of the program.
3. A …rm’ total costs c ares
c = 4q 2
where q is the level of output. It can sell any number of units of output at aprice of 64.However, production depicts damage on the …rm’ neighbours.

The total damage Depiicted depends on the …rm’ output:D = 4q + q 2
(a) Assume that the …rm has the property rights. In the absence of anagreement with its neighbours, what would its output be? Supposethat the neighbours negotiate with the …rm. To what output wouldthe negotiations lead? What is the minimum payment that the neighbours must make to the …rm to achieve this change in output? Whatis the maximum payment?
(b) Assume that the neighbours have the property rights. In the absenceof an agreement between the …rm and its neighbours, what wouldthe level of output be? If an agreement is negotiated, what are thelargest and smallest payments that the …rm would have to pay?
(c) Assume that the …rm has the property rights. If the governmentwishes to control the externality by imposing a tax, what would thetax be? How much revenue would it collect?

PHY – A 35 kg uniform ladder is leaned against a building

PHY – A 35 kg uniform ladder is leaned against a building

Question

A 35 kg uniform ladder is leaned against a building. The 5 m tall ladder makes an angle of 60 degrees with the ground. The ladder encounters a coefficient of static friction from the ground of 0.3 and a coefficient of static friction with the wall of 0.42.

A painter must climb two-thirds of the ladder to reach a blank spot on the wall. What is the maximum mass that the painter can have before the ladder begins to slip? (HINT: use the conditions for equilibrium. There are two frictional forces and two normal forces)

ACT 5735 Winter 2014 Final Exam

ACT 5735 Winter 2014 Final Exam

Question
Question #1 (6 points)
What is the controller’s role in strategy implementation? Be sure to provide specific examples in
your answer.
Question #2 (14 points)
List and describe the principles of internal control we discussed in this course . As part of your
answer, provide an example of each principle.
Question #3 (8 points)
List and describe four actions a firm can take to accelerate the collection of cash from sales. For
each action listed, describe the potential costs involved with the action.
Question #4 (6 points)
In your own words, describe the system that Lowes uses to manage its Accounts Payable.
Question #5 (6 points)
Using the financial statements provided on Blackboard, calculate and interpret the days to
collect ratio. Assume credit sales are 15% of total net sales.
Question #6 (10 points)
Using the financial statements provided on Blackboard, calculate and interpret the days to sell
and gross profit ratios.
Question #7 (10 points)
Using the financial statements provided on Blackboard, calculate and interpret the current
liabilities ratios (including cash cycle) we discussed in class.
Question #8 (10 points)
Using the financial statements provided on Blackboard, calculate and interpret the long-term
liabilities ratios we discussed in class.
Question #9 (10 points)
What is a firm’s WACC? How is it calculated? How is it used?
Question #10 (10 points)
Consider the following potential investment, which has the same risk as the firm’s other projects:
Time
0
1
2
3
4

Cash Flow
-$170,000
$58,000
$63,000
$67,000
$68,000

The firm’s current weighted-average cost of capital is 14%.
a) How much value will this investment create for the firm?

b) At what discount rate will this project break even?
c) Should the firm do this investment? Be sure to justify your recommendation.
d) How would your analysis change if this potential investment was more risky than the firm’s
other projects? Be specific.
Question #11 (15 points)
The following situations each describe a weakness in internal control. For each situation, explain
why it is a weakness and then suggest a change that would improve internal control.
1) The warehouse clerk is responsible for ordering merchandise when levels become low and
advising the accounting department to issue a payment to the supplier when the goods are
received.
2) The check-singing machine is stored with a supply of pre-numbered, blank checks in the lunch
room closet.
3) Purchase orders can be approved by the purchasing manager, accountant, or warehouse
supervisor, depending on who is least busy.
4) Sales managers are responsible for granting credit to customers.
5) Purchasing managers are allowed to order goods from any vendor he or she chooses

ACCT – Navarro Corporation

ACCT – Navarro Corporation

Question
Operating data for Navarro Corporation are presented below.

2015
2014
Net sales $750,000 $600,000
Cost of goods sold 465,000 390,000
Selling expenses 105,000 66,000
Administrative expenses 60,000 54,000
Income tax expense 36,000 27,000
Net income 84,000 63,000



NAVARRO CORPORATION
Condensed Income Statements
For the Years Ended December 31
2015
2014
Amount
Percent
Amount
Percent
Net sales
$750,000
%
$600,000
%
Cost of goods sold
465,000
%
390,000
%
Gross profit
285,000
%
210,000
%
Selling expenses
105,000
%
66,000
%
Administrative expenses
60,000
%
54,000
%
Total operating expenses
165,000
%
120,000
%
Income before income taxes
120,000
%
90,000
%
Income taxes expense
36,000
%
27,000
%
Net income
$84,000
%
$63,000
%

Assignment 3: Long-Term Investment Decisions

Assignment 3: Long-Term Investment Decisions

Question Assignment 3: Long-Term Investment Decisions
Due Week 9 and worth 300 points
Assume that the low-calorie microwavable food company from Assignments 1 and 2 wants to expand and
has to make some long-term capital budgeting decisions.
Use the Internet and Strayer databases to research government policies and regulation.
Write a six to eight (6-8) page paper in which you:
1. Outline a plan that managers in the low-calorie microwaveable food company could follow when
selecting pricing strategies for making their products as inelastic as possible. Provide a rationale
for your response.
2. Examine the major effects that government policies have on production and employment. Predict
the potential effects that government policies could have on your company.
3. Determine whether or not government regulation to ensure fairness in the low-calorie
microwavable food industry is needed. Cite the major reasons for government involvement in a
market economy. Provide two (2) examples of government involvement in a similar market
economy to support your response.
4. Examine the major complexities that would arise under expansion via capital projects. Propose
key actions that the company could take in order to prevent or address these complexities.
5. Suggest the substantive manner in which the company could create a convergence between the
interests of stockholders and managers. Indicate the most likely impact to profitability of such a
convergence. Provide two (2) examples of instances that support your response.
6. Use at least five (5) quality academic resources in this assignment. Note: Wikipedia does not
qualify as an academic resource.

IFSM300 Haircuts Case Study STAGE 2 assignment

IFSM300 Haircuts Case Study STAGE 2 assignment

Question

Case Study, Stage 2: Business Process Analysis and Technology Solution Proposal

Before you begin this assignment, be sure you have read the “UMUC Haircuts Case Study”, “UMUC Haircuts Stage 1” Project and the “Walmart Example.” You will use the strategic business area and process that you selected in Stage 1; review the feedback you received for any recommended changes to your Stage 1 project prior to starting this assignment and be sure you have an appropriate “process” identified.

Purpose of this Assignment

This assignment gives you the opportunity to apply your analysis skills to model a business process. Modeling the process as it exists (and as it will exist) will aid in the analysis, design, development and implementation of the technology solution. This assignment also gives you the opportunity to apply your knowledge of technology solutions to improve a business process. This assignment specifically addresses the following course outcomes to enable you to:

  • analyze internal and external business processes to identify information systems requirements.
  • identify and plan IT solutions that meet business objectives.

Business Process Analysis for the UR UMUC Healthy Fitness Center

In order to apply technology to a process, the process must be thoroughly understood and models are used for this purpose. The model also supports business process analysis and redesign when the process is deemed to be inefficient or ineffective. In addition, models are used to design the “to-be” process that describes the desired end state after the technology solution is developed.

For your Stage 1 Project for the Case Study, you identified a strategic business area for improvement of the UMUC Haircuts business, and youidentified a process that could be improved with the use of technology. In this stage, you will create a model of that process that will define in detail the steps in the process as it is done today to aid in the analysis of the problem, and you will create a model of the proposed new, improved process, and explain your proposed IT solution to support that improved process.

The proposed information technology solution should address the revised business process and should be appropriate to UMUC Haircuts. The solution will be briefly described, and an explanation given for why and how this proposed solution will improve the business process. Be sure to read the instructions for the remaining projects in this Case Study (Stages 3-5) to get an understanding of the future projects that build on the proposed solution and to help you in deciding upon your solution. You want to propose a solution that can be used in the assignments that follow this one, so be selective and choose an appropriate solution.

Assignment

For this assignment you will use the process identified for improvement in your Stage 1 Project. There are 2 parts to this assignment.

Part 1: Business Process Analysis - Models of the AS IS Process and the TO BE Process. The various course resources provided for Week 2 illustrate several different methods of modeling business processes. You may use any of the models shown(or follow the example provided in the Walmart Example), to analyze the process you identified for improvement,breaking it down into sequential steps and modeling it. You may use Microsoft Word, Excel or Power Point (or compatible software) or clearly and professionally hand-draw your model and scan it into an electronic file format. Which model format you choose to use is not as important as making sure you have included all the major steps in the process and appropriately sequenced them. The process that you model must be the one you identified in your Stage 1 Project(or the one suggested by the instructor) and it needs to be appropriate to UMUC Haircuts. First, you will model the process as it is currently performed at the shop; this is the AS IS Process. Then you will model the way that you expect the new process to function after your proposed technology solution is implemented; this is the TO BE Process. Note: See Stage 1 for the definition of a process and examples of processes at UMUC Haircuts.

Tools for Creating the Models

The following website has a more detailed description of Flow Charting and its uses:

To create a flow chart or process map in Excel:

§

§

§ [cc is ok, demo is self-explanatory]

To create a flow chart in Word:

§

[closed captions and transcripts are not helpful, but demos are self-explanatory]

§

[closed captions are in German, but demo is helpful]

To create a flow chart in PowerPoint:

§

[closed caption, but demo is self-explanatory]

Business Process Example: If a grocery store had a need to reduce expenses and improve customer satisfaction, a process needing improvement might be improving the inventory process to ensure availability of products for customers as well as to reduce cost related to spoiled inventory. The model could include the steps necessary to record inventory information, update inventory when merchandise is sold, place orders for additional inventory from suppliers, etc.

Part 2: Technology Solution Proposal. Using at least one external resource(a source other than those provided in this class), write a short paper 1-2 pages in length, not including References page and cover sheet, responding to the bulleted items below. Remember to correctly cite and reference your sources using APA format. Use the Grading Rubric to be sure you have covered everything.

Create a document that includes the following:

  1. At the end of your Stage 1 assignment, you listed the strategy, business area and process selected. These should be provided at the beginning of this paper to set the stage. Be sure to incorporate any recommended changes, and show:

GENERIC STRATEGY:

STRATEGIC BUSINESS AREA:

PROCESS TO BE IMPROVED:

  1. Briefly explain the business process identified in Stage 1 and why it could benefit from a technology solution.
  2. Propose a specific information technology solution, describing it in a few sentences. Note: It’s tempting to propose integrating lots of new technology but focus on a single solution that would improve the process you identified and modeled.
  3. Next, briefly describe (in one to three sentences each) the components of the IT infrastructure required for your proposed IT solution, as they would be implemented at UMUC Haircuts. The components of the IT infrastructure are described and explained in the Course Module 2, Solution Building. They are:

§ services -the people or organizations that run, support, and manage the other infrastructure components; can be internal staff or external contractors or service providers. You should include who will run, support and manage the infrastructure components for your proposed solution.

§ hardware -devices that perform the input, storage, processing, and output functions. Include the major, important hardware components needed to implement your proposed solution.

§ software –identify the type of application software to be used; if you are proposing to use a software package, provide the name of it.

§ telecommunications –identifywhat kind of telecommunications will be needed for the solution, including local connectivity and internet access, if appropriate, and whether it will be used for data, voice and/or video.

§ facilities -what facilities will be needed to house the equipment and support staff; state whether the hardware be housed at UMUC Haircuts or at another facility.

5. Explain how the proposed technology solution will improve the process.

  1. Explain how the proposed technology solution will support the selected Generic Strategy and the selected Strategic Business Area.

Technology Solution Example: If a grocery store wanted to improve its inventory process, a proposed technology solution might be the implementation of hand-held scanners for customers. The hand-held scanners could update inventory real-time as customers make their purchases. This solution would require purchase of hand-held scanner devices, software that can collect the data, appropriate wireless network, etc.

Submit your Part 1 and Part 2 paper with your last name included in the filename(s). If possible combine Part 1 and Part 2 into one file; otherwise be sure each file is clearly labeled identifying the Part of Stage 2 it represents.

Note: Your models will be evaluated on whether they are applicable to the process identified, all major steps in the AS-IS and TO-BE processes are included and correctly modeled, and they are appropriate to the UMUC Haircuts business.

Your paper will be evaluated on whether or not you correctly incorporated the course concepts and addressed all parts of the questions. You need to do some external research on at least one aspect of the assignment - your choice - and incorporate it and cite (and reference) it in APA format in your response. What, exactly, you propose as a technology solution will be evaluated as to whether it is appropriate for UMUC Haircuts and could actually improve the process identified, and whether it is fully thought-out and supported with application of course concepts and research. Remember, this is an information systems management course, and your solution must be an information technology solution. Use the Rubric below to be sure you have covered all aspects.