Blog

This discussion question has thrown me. I don’t understand its complexity.

This discussion question has thrown me. I don’t understand its complexity.

Question

Say you are the manager of a perfectly competitive firm selling a product. Your business is making a loss because total revenue is less than total costs. What would you do--shut down or continue to operate? Use hypothetical numbers to explain. Information you need to provide include--state the product you are selling, the price of the product, the quantity of the product you produce, fixed costs, total cost, figure out total revenue, total and average variable costs. Then go ahead and make your decision. Explain carefully why it makes better sense to shut down rather than continue to operate or to continue to operate rather than shut down, as the case may be. How do fixed costs play a role in your analysis? What is the difference between shutting down and going out of business?

Dick Cheney’s company

Dick Cheney’s company

Question Dick Cheney's company’s CFO is trying to verify the accuracy of the ending WIP and Finished Goods inventories prior to closing the books for the year. You have been asked to assist in this verification. The year-end balances shown on Spirit’s books are as follows:
Units Costs
WIP, 12/31 (conversion 50% complete) 300,000 $ 660,960
Finished Goods, 12/31 200,000 $1,009,800

Materials are added to production at the beginning of the manufacturing process, and overhead is applied to each product at the rate of 60% of direct labor cost. There was no Finished Goods inventory at the beginning of the year (all prior year finished goods were sold). A review of Cheneys inventory and cost records has disclosed the following data:
Direct Costs
Units Materials Labor
WIP, January 1 (conversion 80% complete) 200,000 $200,000 $315,000
Units started into production 1,000,000
Costs added during the year:
Materials cost $1,300,000
Labor cost $1,995,000
Units completed during the year 900,000

The company uses the weighted average method.

Required (support your work):
a) Determine the equivalent units and costs per equivalent unit for inventory costs.
b) Are the ending cost balances in the WIP and Finished Goods inventory as shown (note: the unit amount ending balances are correct)? If they are not correct, what should the ending cost balances be?
c) Determine the cost of goods sold for the year (assume no over- or under-applied overhead).

ACME Corp is a publicly traded firm listed on the NASDAQ. Its current common stock price is 10 dollars per share

ACME Corp is a publicly traded firm listed on the NASDAQ. Its current common stock price is 10 dollars per share

Question ACME Corp is a publicly traded firm listed on the NASDAQ. Its current common stock price is 10 dollars per share. The company currently has 75 million dollars in sales. It expects sales to grow at 3 percent a year for the next several years. The company’s current fixed costs are 50 million dollars. The federal tax rate is 40 percent. The variable costs are 22.5 million dollars this year. There are 1,000,000 shares outstanding.

The company has four capital projects that it would like to fund this year. If funded all four projects would be producing results for the firm one year from now. Project A has a life of 8 years, an initial investment of 2 million dollars, and an IRR of 12 percent. Project B has a 5 million dollar initial investment and a five-year life with an annual net cash income expected of 1,318,982 and an IRR of 10 percent. Project C has a life of 10 years, an IRR of 10 percent and a 4 million dollar initial investment. Project D is a 7-year project with an initial investment of 3 million dollars and a 9 percent IRR.

If the company uses debt, its investment banker suggests the following structure: 8 year maturity, equal annual principal repayments over the 8 years, and a 12 percent interest rate on outstanding principal.

The company pays no dividends on its common stock. The investment banker said to assume the firm would be able to issue common stock at the current market price, assuming the earnings per share will not be hurt in the future.

Preferred stock can be issued for a par value of 25 dollars per share and an annual dividend yield of 8 percent per share. Preferred dividends are not tax deductible to the company. Instead they are paid out of net income after taxes. Earnings per share on common stock should be calculated after preferred dividends have been paid. The numbers of shares of preferred stock are not included in the earnings per share calculation. This only includes common stock.

For this case, we are not going to require a marginal cost of capital analysis. Assume that all four projects are going to be done. The Price Earnings ratio that is calculated in problem number one should also be utilized, as appropriate in each of the five remaining problems to forecast the stock price.

Case Requirements

1. Prepare a baseline income statement and forecast for 2 years. (current year and year 1 and year 2) without the impact of the new capital program.

2. Prepare a current and 2 year forecast which shows the impact of the capital program on the company’s income statement, prior to selecting any funding options.

3. Prepare an income statement forecast (year 1 of forecast in item 2) that shows a 100 percent debt financing option. Please show the forecasted earnings per share and the forecasted stock price, assuming the current PE multiple remains the same. (just as in the example)

4. Prepare an income statement forecast as in number 3, using 100 percent common stock as the funding source.

5. Prepare an income statement forecast for year 1 (as in number 3) using a mix of debt, common stock, and preferred stock. The goal is to attempt to avoid reducing the current stock price and hopefully increasing the price. Show your assumptions clearly on your funding mix.

6. Do the problem in number five, assuming that the 3 percent increase in sales does not occur. Instead, assume that the sales remain flat from the current year to year 1. Again, calculate the best mix of debt and equity to maximize stock prices (or at least minimize the damage to the stock price) , assuming the current PE multiple remains unchanged.

davenport econ625 week 5 quiz

davenport econ625 week 5 quiz

Question

·

Which of the following does not tend to affect the threat of entry?

· Question 2

3.5 out of 3.5 points

Which of following factors should be considered when assessing complements and substitutes?

· Question 3

3.5 out of 3.5 points

Why are suppliers in a competitive upstream market said to have “indirect power”?

· Question 4

3.5 out of 3.5 points

What term refers to the ability of individual customers to negotiate purchase prices that extract profits from sellers?

· Question 5

3.5 out of 3.5 points

Which of the following factors requires the least consideration when assessing supplier power relative to the downstream industry it sells to?

· Question 6

3.5 out of 3.5 points

When multiple firms’ price-quality positions line up along the same indifference curve offering a consumer the same amount of consumer surplus, what term describes the situation?

· Question 7

3.5 out of 3.5 points

Which of the following terms is a concept, developed by Michael Porter, which describes the activities within firms and across firms that add value along the way to the ultimate transacted good or service?

· Question 8

3.5 out of 3.5 points

Which of the following is a resource?

· Question 9

3.5 out of 3.5 points

Which of the following is false with respect to the strategy of cost leadership?

Response Feedback:

· Question 10

3.5 out of 3.5 points

Under what type of strategy does a firm either offer a narrow set of varieties, serve a narrow set of customers, or do both?

Suppose you have been hired as a financial consultant to Defense Electronics, Inc

Suppose you have been hired as a financial consultant to Defense Electronics, Inc

Question Suppose you have been hired as a financial consultant to Defense Electronics, Inc. (DEI), a large, publicly traded firm that is the market share leader in radar detection systems (RDSs). The company is looking at setting up a manufacturing plant overseas to produce a new line of RDSs. This will be a five-year project. The company bought some land three years ago for $4 million in anticipation of using it as a toxic dump site for waste chemicals, but it built a piping system to safely discard the chemicals instead. If the company sold the land today, it would receive $5.1 million after taxes. In five years, the land can be sold for $6.0 million after taxes, but DEI intends to keep the land for a future project. The company wants to build its new manufacturing plant on this land; the plant will cost $35 million to build. The following market data on DEI's securities are current:

Debt: 240,000 7.5 percent coupon bonds outstanding, 20 years to maturity, selling for 94 percent of par; the bonds have a $1,000 par value each and make semiannual payments.

Common stock: 9,000,000 shares outstanding, selling for $71 per share; the estimated beta is 1.2.

Preferred stock: 400,000 shares of 5.5 percent preferred stock outstanding, par value of $100 per share, selling for $81 per share.

Market: 8 percent expected market risk premium; 5 percent risk-free rate.

DEI uses G. M. Wharton as its lead underwriter. Wharton charges DEI spreads of 8 percent on new common equity (stock) issues, 6 percent on new preferred stock issues and 4 percent on new debt (bond) issues. Wharton has included all direct and indirect costs (along with its profit) in setting these spreads. In estimating DEI’s WACC, you should assume that DEI retains their existing capital structure weights for debt, common stock and preferred stock in order to finance the project. DEI's tax rate is 35 percent. The project requires $1,300,000 in initial net working capital (NWC) investment to get operational. Assume Wharton raises all financing for the new project, to include the amount needed for NWC, externally.

a. Calculate the project's initial Time 0 cash flow, taking into account all side effects such as flotation costs. Floatation costs affect the amount of money that must be borrowed. That is, assume that the floatation costs will be paid with the funds (capital) raised. So, make sure you raise enough capital to pay for the project, to include NWC, and pay the floatation costs for each source of capital (equity, debt and preferred stock).

b. The new RDS project is somewhat riskier than a typical project for DEI, primarily because the plant is being located overseas. Management has told you to use an adjustment factor of +2 percent (add 2 percent to your estimated WACC) to account for this increased riskiness. Calculate the appropriate discount rate to use when evaluating DEI's project.

c. The manufacturing plant has an eight-year tax life, and DEI uses straight-line depreciation. At the end of the project (i.e., the end of Year 5), the equipment can be sold for $6 million. Do not confuse the market value of the equipment with the market value of the land. What is the after-tax salvage value of the equipment?

d. The company will incur $7,000,000 in annual fixed costs. The plan is to manufacture 18,000 RDSs per year and sell them at $10,900 per machine; the variable production costs are $9,400 per RDS. What is the annual operating cash flow, OCF, from this project?

e. DEI's comptroller is primarily interested in the impact of DEI's investments on the bottom line of reported accounting statements. What will you tell her are both the Accounting and Financial Break-Even quantity of RDSs sold for this project? For an understanding of Accounting and Financial Break-Even (Break-Even Point), see EOC Questions 9.4 and 9.5 and Problems 9.1, 9.9, 9.10, 9.11 and 9.22. As your text states, “the break-even approach determines the sales needed to break even on the project investment – the point where the project generates no profits or loss.”

f. DEI's president wants you to throw all your calculations, assumptions, and everything else into the report for the chief financial officer; all he wants to know is what the RDS project's internal rate of return (IRR) and net present value (NPV) are. What will you report? Be sure to review the Baldwin case in Chapter 8 for how to handle the cash flow associated with the land. Note in the Baldwin case that the warehouse is an “opportunity cost” at t = 0, but becomes an “opportunity revenue” at the end of the projects life. Assume the same for the land in this case. Remember to recover any NWC cash outflows in the initial cash flow amount when the project ends.

g. What will be your estimate of NPV and IRR if the average RDS sales price per unit must be reduced by 5 percent (from $10,900 per unit to $10,355 per unit) in order to sell the 18,000 proposed units that are being manufactured? Will you still recommend the project?
h. What does a minor price adjustment like that suggest in g above tell you about the uncertainties involved in financial valuation? Discuss the importance of Scenario and Sensitivity Analysis in financial decision-making.

Additional Requirements

Min Pages: 1
Max Pages: 1
Level of Detail: Show all work
Other Requirements: You must show your calculations! There is no specific written format required, but short verbal statements explaining your answers to each question are required. There is no Executive Summary requirement. Some I see on this site for similar cases have used Excel which is fine.

MGMT345- Operations Management Discussion Question

MGMT345- Operations Management Discussion Question

Question

Primary Task Response: Within the Discussion Board area, write 400–600 words that respond to the following questions with your thoughts, ideas, and comments. This will be the foundation for future discussions by your classmates. Be substantive and clear, and use examples to reinforce your ideas.

The line managers in the production department have heard a lot of good things about value chain management. They heard that you have done considerable research on this topic. They have come to your office today to discuss value chain management with you.
•Summarize 3 examples of how value chain helps companies become more competitive. You are presenting these to the administrative team from the production department.
•Discuss how value chain helps companies create and build value for their clients and partnering organizations by answering the following questions: ?How do you believe value chain management works?
?How do you think value chain management can help companies be more competitive?
?How do you think value chain management helps companies create and build value?
?Include an introduction and a conclusion in addition to the 3 paragraphs.
?Be sure to include your references, and format your submission in APA format.

Discussion 1: Relations and Functions

Discussion 1: Relations and Functions

Question


MAT 222 Week 5 DQ1

f(x)=4      x=(y+2)^2

 Graph the functions so you can describe the graphs in my discussion. Mention 5 points in graph including intercepts, vertex, start/end points Discuss the general shape and location.  State the domain and range for each of my eqations. Write them in interval notation. state whether each of the equations is a function. Select graph and shiftednthree units upward and foru units to the left. Discuss how this transformation affects the equation by rewriting the equation to incorporate those numbers. Use the following vocabulary words in bold in describing your work: function, relation, domain, range, and transformation

ENG215 Assignment 4: Persuasive Paper Part 2: Solution and Advantages

ENG215 Assignment 4: Persuasive Paper Part 2: Solution and Advantages

Question Assignment 4: Persuasive Paper Part 2: Solution and Advantages
Due Week 7 and worth 200 points

Using feedback from your professor and classmates, revise Part 1 and develop the solution and identify the advantages of the solution. Note: The disadvantages or challenges with your answers will be in Part 3.

Write a six to eight (6-8) page paper in which you:

Provide Part I: Revision of A Problem Exists (3-4 pages)

1. Revise, using feedback from the professor and classmates, your Persuasive Paper Part I: A Problem Exists.

Develop Part 2: Solution to Problem and Advantages (3-4 pages for 6-8 pages total)

2. Include a defensible, relevant thesis statement clearly in the first paragraph. (The thesis statement may need to be modified to reflect added information and purpose of this part.)

3. Explain a detailed, viable solution that supports your thesis. This should be one or two (1-2) paragraphs.

4. State, explain, and support the first advantage (economic, social, political, environmental, social, equitable, ethical/moral, etc.) to your solution. This should be one or two (1-2) paragraphs.

5. State, explain, and support the second advantage (economic, social, political, environmental, social, equitable, ethical/moral, etc.) to your solution. This should be one or two (1-2) paragraphs.

6. State, explain, and support the third (and fourth if desired) advantage (economic, social, political, environmental, social, equitable, ethical/moral, etc.) to your solution. This should be one or two (1-2) paragraphs.

7. Use effective transitional words, phrases, and sentences.

8. Provide a concluding paragraph / transitional paragraph that summarizes the proposed solution and its advantages.

9. Develop a coherently structured paper with an introduction, body, and conclusion.

10. Use one (1) or more rhetorical strategies (ethos, logos, pathos) to explain advantages.

11. Support advantage claims with at least three (3) additional quality relevant references. Use at least six (6) total for Parts 1 and 2. Note: Wikipedia and other Websites do not qualify as academic resources.

Kaplan Univ – Focus of the Final Exam

Kaplan Univ – Focus of the Final Exam

Question

Focus of the Final Exam

The purpose of the Final Exam is to assess your understanding of the main statistical concepts covered in this course and to evaluate your ability to critically review a quantitative research article. The exam will consist of two parts: Part I includes three essay questions and Part II includes a research critique. All of your responses should be included in a single Word document for submission.

Please include the following general headings for each section of the written exam within your Word document:

Part I: Essay Questions

1. Essay 1

2. Essay 2

3. Essay 3

Part II: Research Study Critique

1. Introduction

2. Methods

3. Results

4. Discussion

Your complete Word document must include a title page with the following:

1. Student’s name

2. Course name and number

3. Instructor’s name

4. Date submitted

Part I: Essay Questions

There are three essay questions in this section. You must answer all three questions. The length of each essay should be one to two double-spaced pages (excluding title and reference pages). Use 12-point font and format your paper with regular 1-inch margins. Do not include the essay prompt in your document. It will not count toward the length requirement for your essays.

Essay 1

A group of researchers conducted an experiment to determine which vaccine is more effective for preventing getting the flu. They tested two different types of vaccines: a shot and a nasal spray. To test the effectiveness, 1000 participants were randomly selected with 500 people getting the shot and 500 the nasal spray. Of the 500 people were treated with the shot, 80 developed the flu and 420 did not. Of the people who were treated with the nasal spray, 120 people developed the flu and 380 did not. The level of significance was set at .05. The proportion of people who were treated with the shot who developed the flu = .16, and the proportion of the people who were treated with the nasal spray was .24. The calculated p value = .0008.

For this essay, describe the statistical approaches (e.g., identify the hypotheses and research methods) used in this excerpt from a research study. Interpret the statistical results and examine the limitations of the statistical methods. Finally, evaluate the research study as a whole and apply what you have learned about hypothesis testing and inferential statistics by discussing how you might conduct a follow-up study.

Your essay must address the following points:

• Describe the research question for this experiment.

oWhat were the null and alternative hypotheses?

oWere the results of this test statistically significant?

oIf so, why were they significant?

•Would the researchers reject or fail to reject the null hypothesis?

•Do the results provide sufficient evidence to support the alternative hypothesis?

•Was the sample appropriate for this study? Explain your answer.

•What are some possible limitations to this study?

•Discuss how you would conduct a follow up study to this one. Explain your answer.

• Describe the difference between practical and statistical significance.

Essay 2

A researcher has investigated the relationship between IQ and grade point average (GPA) and found the correlation to be .75.

For this essay, critique the results and interpretation of a correlational study.

•Evaluate the correlational result and identify the strength of the correlation.

•Examine the assumptions and limitations of the possible connection between the researcher’s chosen variables.

•Identify and describe other statistical tests that could be used to study this relationship.

Your essay response must address the following questions:

•How strong is this correlation?

oIs this a positive or negative correlation?

oWhat does this correlation mean?

•Does this correlation imply that individuals with high Intelligence Quotients (IQ) have high Grade Point Averages (GPA)?

•Does this correlation provide evidence that high IQ causes GPA to go higher?

oWhat other variables might be influencing this relationship?

•What is the connection between correlation and causation?

•What are some of the factors that affect the size of this correlation?

•Is correlation a good test for predicting GPA?

oIf not, what statistical tests should a researcher use, and why?

Essay 3

A researcher has recorded the reaction times of 20 individuals on a memory assessment. The following table indicates the individual times:

2.2

4.7

7.3

4.1

9.5

15.2

4.3

9.5

2.7

3.1

9.2

2.9

8.2

7.6

3.5

2.5

9.3

4.8

8.5

8.1

In this essay, demonstrate your ability to organize data into meaningful sets, calculate basic descriptive statistics, interpret the results, and evaluate the effects of outliers and changes in the variables. You may use Excel, one of the many free online descriptive statistics calculators, or calculate the values by hand and/or with a calculator.

Next, separate the data into two groups of 10; one group will be the lower reaction times, and the second group will be the higher reaction times. Then, address the following points in your essay response:

• Calculate the sum, mean, mode, median, standard deviation, range, skew, and

kurtosis for each group.

• How do the two groups differ?

•Are there any outliers in either data group?

•What effect does an outlier have on a sample?

Lastly, double each sample by repeating the same 10 data points in each group. You will have a total of 20 data points for each group. After completing this, address the following in your essay response:

• Calculate the following for the new data groups: sum, mean, mode, median, standard deviation, range, skew, and kurtosis.

•Did any of the values change?

•How does sample size affect those values?

Part B: Research Study Critique

In this second portion of the Final Exam, you will identify and critically evaluate a quantitative research article based on a social science topic. Your selected article must include a research question(s) and/or hypothesis(es) and utilize statistical analyses covered in the course. The article must be peer-reviewed and published within the last 10 years.

In the body of your critique, describe the statistical approaches used, the variables included, the hypothesis(es) proposed, and the interpretation of the results. In your conclusion, suggest other statistical approaches that could have been used and, if appropriate, suggest alternative interpretations of the results. This process will allow you to apply the concepts learned throughout the course in the interpretation of actual scientific research. Your critique must include the following sections:

1. Introduction: This section will include a general introduction of the quantitative study from a peer-reviewed source published within the last 10 years. The research

questions and/or hypothesis(es) as well as the purpose of the study should be clearly

defined.

2. Methods: Describe and evaluate the procedures and methods of data collection,

measures/instruments used, the participants and how they were selected, and the

statistical techniques used.

3.Results: In this section describe and critique the results presented in the study.

4. Discussion: Discuss and evaluate the efficacy of the results presented in the study. Address, the strengths, weaknesses, and limitations of the study, and suggest future research directions. Include additional forms of statistical analyses as part of the suggestions for future research.

The Research Study Critique:

1.Must be three to four double-spaced pages in length (excludi ng title and reference pages) and formatted according to APA style as outlined in the Ashford Writing Center. Use 12-point font, with 1-inch margins.

2. Must use the sections and headings described above.

3.Must address the article with critical thought by examining, reflecting, and evaluating the article from an objective viewpoint and by using facts to support your argument. Refer to the Critical Thinking Community website for further assistance.

4.Must end with a conclusion that summarizes your critical evaluation.

5.Must use one quantitative research study from a peer-reviewed source that was published within the last 10 years.

6.Must properly cite the source article in APA style as outlined in the Ashford Writing Center.

7. Must include a separate reference page, formatted according to APA style as outlined in the Ashford Writing Center.


accounting problems with all solutions

accounting problems with all solutions

Question

Chapter Two and Three Problems

Please complete the following 7 exercises below in either Excel or a word document (but must be single document). You must show your work where appropriate (leaving the calculations within Excel cells is acceptable). Save the document, and submit it in theappropriate week using the Assignment Submission button.

Chapter 2 Exercise 1

1. Issuance of stock

Prepare journal entries to record the issuance of 100,000 shares of common stock at $20 per share for each of the following independent cases:

a. Jackson Corporation has common stock with a par value of $1 per share.

b. Royal Corporation has no-par common with a stated value of $5 D share.

c. French Corporation has no-par common; no stated value has been as signed

Chapter 2 Exercise 3

3. Analysis of stockholders' equity

Star Corporation issued both common and preferred stock during 19X6. The stockholders' equity sections of the company's balance sheets at the end of 19X6 and 19X5 follow.

19X6

19X5

Preferred stock, $100 par value, 10%

$580,000

$500,000

Common stock, $10 par value

2,350,000

1,750,000

Paid-in capital in excess of par value

Preferred

24,000

—

Common

4,620,000

3,600,000

Retained earnings

8,470,000

6,920,000

Total stockholders' equity

$16,044,000

$12,770,000

a. Compute the number of preferred shares that were issued during 19X6.

b. Calculate the average issue price of the common stock sold in 19X6.

c. By what amount did the company's paid-in capital increase during 19X6?

d. Did Star's total legal capital increase or decrease during 19X6? By what amount?

Chapter 2 Problem 1

1. Bond computations: Straight-line amortization

Southlake Corporation issued $900,000 of 8% bonds on March 1, 19X1. The bonds pay interest on March 1 and September 1 and mature in 10 years. Assume the independent cases that follow.

· Case A—The bonds are issued at 100.

· Case B—The bonds are issued at 96.

· Case C—The bonds are issued at 105.

Southlake uses the straight-line method of amortization.

Instructions:

Complete the following table:

Case A

Case B

Case C

  1. Cash inflow on the issuance date

_______

_______

_______

  1. Total cash outflow through maturity

_______

_______

_______

  1. Total borrowing cost over the life of the bond issue

_______

_______

_______

  1. Interest expense for the year ended December 31, 19X1

_______

_______

_______

  1. Amortization for the year ended December 31, 19X1

_______

_______

_______

  1. Unamortized premium as of December 31, 19X1

_______

_______

_______

  1. Unamortized discount as of December 31, 19X1

_______

_______

_______

  1. Bond carrying value as of December 31, 19X1

_______

_______

_______

Chapter 3 Exercise 1

1. Product costs and period costs

The costs that follow were extracted from the accounting records of several different manufacturers:

1. Weekly wages of an equipment maintenance worker

2. Marketing costs of a soft drink bottler

3. Cost of sheet metal in a Honda automobile

4. Cost of president's subscription to Fortune magazine

5. Monthly operating costs of pollution control equipment used in a steel mill

6. Weekly wages of a seamstress employed by a jeans maker

7. Cost of compact discs (CDs) for newly recorded releases of Rush, Billy Joel, and Bryan Adams

a. Determine which of these costs are product costs and which are period costs.

b. For the product costs only, determine those that are easily traced to the finished product and those that are not.

Chapter 3 Exercise 2

2. Definitions of manufacturing concepts
Interstate Manufacturing produces brass fasteners and incurred the following costs for the year just ended:

Materials and supplies used

Brass $75,000

Repair parts 16,000

Machine lubricants 9,000

Wages and salaries Machine operators 128,000

Production supervisors 64,000

Maintenance personnel 41,000

Other factory overhead Variable 35,000

Fixed 46,000

Sales commissions 20,000

Compute:

a. Total direct materials consumed

b. Total direct labor

c. Total prime cost

d. Total conversion cost

Chapter 3 Exercise 5

5. Scheduleof cost of goods manufactured, income statement

The following information was taken from the ledger of Jefferson Industries, Inc.:

Direct labor

$85,000

Administrative expenses

$59,000

Selling expenses

34,000

Work in. process

Sales

300,000

Jan. 1

29,000

Finished goods

Dec. 31

21,000

Jan. 1

115,000

Direct material purchases

88,000

Dec. 31

131,000

Depreciation: factory

18,000

Raw (direct) materials on hand

Indirect materials used

10,000

Jan. 1

31,000

Indirect labor

24,000

Dec. 31

40,000

Factory taxes

8,000

Factory utilities

11,000

Prepare the following:

a. A schedule of cost of goods manufactured for the year ended December 31.

b. An income statement for the year ended December 31.

Chapter 3 Problem 3
3. Manufacturing statements and cost behavior

Tampa Foundry began operations during the current year, manufacturing various products for industrial use. One such product is light-gauge aluminum, which the company sells for $36 per roll. Cost information for the year just ended follows.

Per Unit

Variable Cost

Fixed Cost

Direct materials

$4.50

$ —

Direct labor

6.5

—

Factory overhead

9

50,000

Selling

—

70,000

Administrative

—

135,000

Production and sales totaled 20,000 rolls and 17,000 rolls, respectively There is no work in process. Tampa carries its finished goods inventory at the average unit cost of production.

Instructions:

a. Determine the cost of the finished goods inventory of light-gauge aluminum.

b. Prepare an income statement for the current year ended December 31

c. On the basis of the information presented:

1. Does it appear that the company pays commissions to its sales staff? Explain.

2. What is the likely effect on the $4.50 unit cost of direct materials if next year's production increases? Why?