Blog

trident eng102 module 3 case study and slp

trident eng102 module 3 case study and slp

Question

module 3 case study

For this case assignment, read both Prezi vs. Powerpoint articles by Daivd Wicks and Phil Bird. You will write a brief essay that summarizes their main points about prezi and powerpoint. What does each author say about prezi and powerpoint? Simply highlight the differences between the two applications/programs.

Assignment Expectations:

  • Write two-three pages
  • Include both the negatives and positives of each program
  • Include both an introduction and conclusion
  • Consider what each program would be best used for

Submit your work by the end of this module.


module 3 SLP


For the Session-Long project, you will write an analysis of which application, PowerPoint or Prezi, would be best for giving a presentation to your colleagues about an anticipated equipment upgrade.

Your analysis of the presentation software should consider its usefulness as a tool, which will be used to address the concerns of those involved, and to tell them how the equipment upgrade will impact various their jobs, enhance productivity, increase income, and improve corporate finances.

Your task is to decide which application would be better for presenting this information, and why. Write a three- or four-page analysis explaining your decision. Be sure to include the specific characteristics of the situation being presented to your colleagues-- i.e., replacing equipment, the required training, etc. -- and explain how those characteristics affected your choice of presentation software.

Assignment Expectations:

  • Write three-four page Analysis
  • Address the scenario/situation
  • Determine which program/application would work best for the presentation of information
  • Include reasons for your choice. Why did you choose one program as opposed to another, for instance?
  • Cite any outside sources

Submit your work by the end of this module.

FIN – Analysis of stockholders’ equity

FIN – Analysis of stockholders’ equity

Question

Analysis of stockholders' equity
Star Corporation issued both common and preferred stock during 20X6. The stockholders' equity sections of the company's balance sheets at the end of 20X6 and 20X5 follow:

20X6 20X5
Preferred stock, $100 par value, 10% $580,000 $500,000
Common stock, $10 par value 2,350,000 1,750,000

Paid-in capital in excess of par value
Preferred 24,000 —
Common 4,620,000 3,600,000
Retained earnings 8,470,000 6,920,000
Total stockholders' equity $16,044,000 $12,770,000

a. Compute the number of preferred shares that were issued during 20X6.
b. Calculate the average issue price of the common stock sold in 20X6.
c. By what amount did the company's paid-in capital increase during 20X6?
d. Did Star's total legal capital increase or decrease during 20X6? By what amount?

Southlake Corporation issued $900,000 of 8% bonds on March 1, 20X1. The bonds pay interest on March 1 and September 1 and mature in 10 years. Assume the independent cases that follow.
• Case A—The bonds are issued at 100.
• Case B—The bonds are issued at 96.
• Case C—The bonds are issued at 105.
Southlake uses the straight-line method of amortization.

Instructions:
Complete the following table:
Case A Case B Case C
a. Cash inflow on the issuance date _______ _______ _______
b. Total cash outflow through maturity _______ _______ _______
c. Total borrowing cost over the life of the bond issue _______ _______ _______
d. Interest expense for the year ended December 31, 20X1 _______ _______ _______
e. Amortization for the year ended December 31, 20X1 _______ _______ _______
f. Unamortized premium as of December 31, 20X1 _______ _______ _______
g. Unamortized discount as of December 31, 20X1 _______ _______ _______
h. Bond carrying value as of December 31, 20X1 _______ _______ _______

. Definitions of manufacturing concepts
Interstate Manufacturing produces brass fasteners and incurred the following costs for the year just ended:
Materials and supplies used
Brass $75,000
Repair parts 16,000
Machine lubricants 9,000
Wages and salaries Machine operators 128,000
Production supervisors 64,000
Maintenance personnel 41,000
Other factory overhead Variable 35,000
Fixed 46,000
Sales commissions 20,000

Compute:
a. Total direct materials consumed
b. Total direct labor
c. Total prime cost
d. Total conversion cost

4. Schedule of cost of goods manufactured, income statement
The following information was taken from the ledger of Jefferson Industries, Inc.:
Direct labor $85,000 Administrative expenses $59,000
Selling expenses 34,000 Work in. process:
Sales 300,000 Jan. 1 29,000
Finished goods Dec. 31 21,000
Jan. 1 115,000 Direct material purchases 88,000
Dec. 31 131,000 Depreciation: factory 18,000
Raw (direct) materials on hand Indirect materials used 10,000
Jan. 1 31,000 Indirect labor 24,000
Dec. 31 40,000 Factory taxes 8,000
Factory utilities 11,000
Prepare the following:
a. A schedule of cost of goods manufactured for the year ended December 31.
b. An income statement for the year ended December 31.


5. Manufacturing statements and cost behavior
Tampa Foundry began operations during the current year, manufacturing various products for industrial use. One such product is light-gauge aluminum, which the company sells for $36 per roll. Cost information for the year just ended follows.
Per Unit Variable Cost Fixed Cost
Direct materials $4.50 $ —
Direct labor 6.5 —
Factory overhead 9 50,000
Selling — 70,000
Administrative — 135,000

Production and sales totaled 20,000 rolls and 17,000 rolls, respectively There is no work in process. Tampa carries its finished goods inventory at the average unit cost of production.
Instructions:
a. Determine the cost of the finished goods inventory of light-gauge aluminum.
b. Prepare an income statement for the current year ended December 31
c. On the basis of the information presented:
1. Does it appear that the company pays commissions to its sales staff? Explain.
2. What is the likely effect on the $4.50 unit cost of direct materials if next year's production increases? Why?

FIN – As a financial consultant, you have contracted with Wheel Industries

FIN – As a financial consultant, you have contracted with Wheel Industries

Question
As a financial consultant, you have contracted with Wheel Industries to evaluate their procedures involving the evaluation of long term investment opportunities. You have agreed to provide a detailed report illustrating the use of several techniques for evaluating capital projects including the weighted average cost of capital to the firm, the anticipated cash flows for the projects, and the methods used for project selection. In addition, you have been asked to evaluate two projects, incorporating risk into the calculations.
You have also agreed to provide an 8-10 page report, in good form, with detailed explanation of your methodology, findings, and recommendations.
Company Information
Wheel Industries is considering a three-year expansion project, Project A. The project requires an initial investment of $1.5 million. The project will use the straight-line depreciation method. The project has no salvage value. It is estimated that the project will generate additional revenues of $1.2 million per year before tax and has additional annual costs of $600,000. The Marginal Tax rate is 35%.
Required:
A. Wheel has just paid a dividend of $2.50 per share. The dividends are expected to grow at a constant rate of six percent per year forever. If the stock is currently selling for $50 per share with a 10% flotation cost, what is the cost of new equity for the firm? What are the advantages and disadvantages of using this type of financing for the firm?
B. The firm is considering using debt in its capital structure. If the market rate of 5% is appropriate for debt of this kind, what is the after tax cost of debt for the company? What are the advantages and disadvantages of using this type of financing for the firm?
C. The firm has decided on a capital structure consisting of 30% debt and 70% new common stock. Calculate the WACC and explain how it is used in the capital budgeting process.
D. Calculate the after tax cash flows for the project for each year. Explain the methods used in your calculations.
E. If the discount rate were 6 percent calculate the NPV of the project. Is this an economically acceptable project to undertake? Why or why not?
F. Now calculate the IRR for the project. Is this an acceptable project? Why or why not? Is there a conflict between your answer to part C? Explain why or why not?

Wheel has two other possible investment opportunities, which are mutually exclusive, and independent of Investment A above. Both investments will cost $120,000 and have a life of 6 years. The after tax cash flows are expected to be the same over the six year life for both projects, and the probabilities for each year's after tax cash flow is given in the table below.
Investment B Investment C
Probability After Tax
Cash Flow Probability After Tax
Cash Flow
0.25 $20,000 0.30 $22,000
0.50 32,000 0.50 40,000
0.25 40,000 0.20 50,000

G. What is the expected value of each project’s annual after tax cash flow? Justify your answers and identify any conflicts between the IRR and the NPV and explain why these conflicts may occur.
H. Assuming that the appropriate discount rate for projects of this risk level is 8%, what is the risk-adjusted NPV for each project? Which project, if either, should be selected? Justify your conclusions.

trident ant250 I module 3 case study and slp

trident ant250 I module 3 case study and slp

Question module 3 case study

In this module, you have learned about muscle structure and function. In this case assignment, you will explore the physiological processes involved in building and maintaining muscle tissue. Specifically, you will prepare a 2-3 page paper in which you:

  1. Describe normal anatomy/physiology of muscle contraction emphasizing the utilization of ATP in this process.
  2. Describe the difference between fast oxidative, slow oxidative, and fast glycolytic fibers.
  3. Discuss the types of activities that utilize each of these three types of fibers.
  4. Address this question: What does training do to muscle? In other words, what is happening in the muscle when it grows in response to working out?

NOTE: This assignment will require you to engage in independent research. Begin with the books that contain your required reading. Additional resources can be found on your bookshelf as well, such as Nerve and Muscle and Dictionary of Cell and Molecular Biology.

Assignment Expectations

Format

Remember that all of your work should be prepared using appropriate format. This link from your course syllabus page will help reinforce formatting expectations:

Scholarly Content

Your SLP and your case assignments are considered scholarly works. Your final work should include a MINIMUM of 10 peer reviewed (scholarly) sources. This does not mean that you must place 10 peer reviewed sources in each module of your Case/SLP. I anticipate that the nature of the questions which must be answered in this project will result in the accumulation of more than 10 references, but 10 is the minimum number. This means by the end of module 5, I should be able to go back and count AT A MINIMUM a total of 10 scholarly-peer reviewed publications in all of your submitted papers. If you are uncertain what a peer reviewed (scholarly) source is, go to

Please keep in mind that you should not use sources such as “Answers.com” or “Wikipedia” or “Wikianswers”. None of these are scholarly sources and they can be “modified” by any registered user which makes it unreliable. It could very well be that those who modify subjects in Wikipedia have a very good knowledge of the subject, however, since we have no way of knowing their credentials or intentions, we cannot guarantee that the source is reliable. It is a good place to start, but should not be used as factual in graduate writing. For graduate study, be sure to stick to peer reviewed journals and scientific sources.

The following site will help:

Appropriate Headings and Paper Flow

Remember that you are preparing a formal academic paper. Your paper should make use of appropriate headings and subheadings. You should not cut & paste the questions posed and answer them like a “Question and Answer” session. Your finished paper should read like an academic paper.



module 3 SLP



For your SLP, you have been asked to teach an anatomy and physiology course for a local vocational nursing school. In order to do this, you are going to need to prepare a PowerPoint presentation that will be used in your lectures.

In this SLP, you will prepare a presentation, consisting of 15 slides, in which you provide your audience with information on the following areas

1) Introduce the anatomy of the knee and shoulder joints (articulating surfaces of bone).

2) Discuss the anatomy of the knee and shoulder. Include labels of:

Knee

  • The ligaments ACL, MCL, PCL, LCL, (LABEL WITH THE FULL NAMES) the menisci
  • The muscles that cross the knee joint: the quadriceps (label all four) and the hamstrings (label all three)

Shoulder

  • glenoid labrum
  • bursa and tendon sheath
  • rotator cuff muscles
  • rotator cuff ligaments
  • the major muscles that cross the shoulder to move the humerus: deltoid, pectoralis major, and trapezius

3) Label the tendons, ligaments, and/or internal joint structures that are commonly damaged in the shoulder and knee, and what motions cause that damage.

4) Provide examples of therapies used to treat those injuries.

Don't forget--the speaker notes should be sufficient in depth and breadth to demonstrate to me that you understood the topics under consideration in this module! Much of this information can be found in the videos you are required to watch!

SLP Assignment Expectations

Number of Slides:15

Content of Slides:Your presentation should use UNLABELED images that you label yourself using textboxes and arrows to address each of the areas listed above.

Speaker Notes

Each slide will contain speaker notes sufficient to tell me what the purpose of each slide is—specifically, what you would say to a live audience that you were presenting your program to.




MATH -540 Week 3 Quiz

MATH -540 Week 3 Quiz

Question

Week 5 Quiz 3:


1. The terms in the objective function or constraints are not additive. TRUE/ FALSE

2. A feasible solution violates at least one of the constraints. TRUE/ FALSE

3. Which of the following could not be a linear programming problem constraint?
a. 1A + 2B
b. 1A + 2B = 3
c. 1A + 2B > 3
d. 1A + 2B < 3

4. In a linear programming problem, a valid objective function can be represented as
A) Max Z = 5xy
B) Max Z 5x2 + 2y2
C) Max 3x + 3y + 1/3z
D) Min (x1 + x2) / x3

5. Non-negativity constraints restrict the decision variables to negative values. TRUE/ FALSE

6. A graphical solution is limited to linear programming problems with ___ decision variables
2

7. A constraint is a linear relationship representing a restriction on decision making.
TRUE/ FALSE

8. Linear programming is a model consisting of linear relationships representing a firm's decisions given an objective and resource constraints. TRUE/ FALSE

9. Non-negativity constraints
A) restrict the decision variables to zero.
B) restrict the decision variables to positive values
C) restrict the decision variables to negative values
D) do not restrict the sign of the decision variable.
E) both A and B


10. Decision models are mathematical symbols representing levels of activity. TRUE/ FALSE

11. Which of the following could be a linear programming objective function?
A) Z = 1A + 2BC + 3D
B) Z = 1A + 2B + 3C + 4D
C) Z = 1A + 2B / C + 3D
D) Z = 1A + 2B2 + 3D
E) all of the above

12. Decision variables
A) measure the objective function
B) measure how much or how many items to produce, purchase, hire, etc.
C) always exist for each constraint
D) measure the values of each constraint

13. A linear programming model consists of decision variables, constraints, but no objective function. TRUE/ FALSE

14. The region which satisfies all of the constraints in a graphical linear programming problem is called the
A) region of optimality
B) feasible solution space
C) region of non-negativity
D) optimal solution space

15. The _______________ property of linear programming models indicates that the decision variables cannot be restricted to integer values and can take on any fractional value.
A) linearity
B) additive
C) divisibility
D) certainty
E) proportionality

16. The production manager for the Coory soft drink company is considering the production of 2 kinds of soft drinks: regular and diet. Two of the limited resources are production time (8 hours = 480 minutes per day) and syrup limited to 675 gallons per day. To produce a regular case requires 2 minutes and 5 gallons of syrup, while a diet case needs 4 minutes and 3 gallons of syrup. Profits for regular soft drink are $3.00 per case and profits for diet soft drink are $2.00 per case. What is the time constraint? A) 2R + 5D ? 480
B) 2D + 4R ? 480
C) 2R + 3D ? 480
D) 3R + 2D ? 480
E) 2R + 4D ? 480

17. Cully furniture buys 2 products for resale: big shelves (B) and medium shelves (M). Each big shelf costs $500 and requires 100 cubic feet of storage space, and each medium shelf costs $300 and requires 90 cubic feet of storage space. The company has $75000 to invest in shelves this week, and the warehouse has 18000 cubic feet available for storage. Profit for each big shelf is $300 and for each medium shelf is $150. What is the objective function?
Z = $300B + $150M
A) MAX Z = $300B + $100 M
B) MAX Z = $300M + $150 B
C) MAX Z = $300B + $150 M
D) MAX Z = $300B + $500 M
E) MAX Z = $500B + $300 M

18. In a linear programming model, the numberof constraints must be less than the number of decision variables. TRUE/ FALSE

19. Proportionality means the slope of a constraint or objective function line is not constant. TRUE/ FALSE

20. The objective function is a linear relationship reflecting the objective of an operation. TRUE/ FALSE


Applied Materials recently merged with the world’s number three semiconductor company Tokyo Elecktron

Applied Materials recently merged with the world’s number three semiconductor company Tokyo Elecktron

Question
The number one semiconductor company in the world Applied Materials recently merged with the world's number three semiconductor company Tokyo Elecktron. The stock prices of both companies went up significantly after the merger was announced, which shows that investors welcome this move that may create synergies and help both companies battle declining revenues in the semiconductor industry. However, even though there are potential benefits to this merger in terms of operational synergies the human side of a merger can often be difficult. Furthermore, Japanese and American cultures are widely perceived as being extremely different from each other which may add to the difficulties in managing the human side of this merger. Case Assignment
For this assignment, review the following two articles and do some of your own research on these two companies:
McClatchy, S. (Sep 2013) Applied Materials to merge with Tokyo ElectronJohnson, Tribune News Service, Washington [Available on Proquest]
Negishi, M. (Sep 2013) Deal-Shy Tokyo Electron Chief Pushed for Sale to Applied Materials; Tetsuro Higashi's Decision Was Based on Experience Watching Japanese Peers Flounder, Wall Street Journal(Online), New York, N.Y [Available on Proquest]
Then once you've finished researching these companies and reviewing some of the key concepts of cross-cultural management in the background materials, write a four to five page paper answering the following questions:
1. What do you think the biggest challenge in terms of cross-cultural management will be in the merger of these two companies? Remember to consider to issues of differences in national cultural values between Japan and the U.S.
2. What steps do you recommend be taken to help ease cultural differences between the two companies?
    Assignment Expectations
    • Answer the assignment questions directly
    • Stay focused on the precise assignment questions, don't go off on tangents or devote a lot of space to general background materials
    • List supporting references and cite sources in proper format
    • Use appropriate writing style in essay form (organization, grammar, & spelling- see Writing Guidelines).

    Mary’s Sunshine Pool Incorporated is a merchandising firm

    Mary’s Sunshine Pool Incorporated is a merchandising firm

    Question COMPANY BACKGROUND
    Mary’s Sunshine Pool Incorporated is a merchandising firm that sells various pool
    supplies, e.g., chemicals, diving boards, pumps, ladders, poolside furniture, pool games, floating
    loungers. At present, Mary’s Sunshine has a manual accounting system; however, the company
    has hired you to implement an accounting program to be used on a personal computer as of July
    1, the beginning of the current fiscal year. Mary and Ed, the stockowners of the company, have
    made available to you the balance sheet and data from the subsidiary ledgers for the fiscal year
    ended June 30.
    As of June 30, Mary’s Sunshine Pool Company consisted of a showroom and an office in
    one building, a distribution center in another building, and five employees. The employees are:
    Lauren Allen, a salesperson at the showroom, Paul Barton and Ernest Callahan, traveling
    salesmen, and Fred and Ted Hill, Mary and Ed’s twin sons who work at the distribution center
    only during the summer months.
    Mary’s Sunshine Pool Incorporated owns the land, the showroom/office building, the
    distribution center building, a delivery truck and two automobiles driven by the traveling
    salesmen.
    REVENUE TRANSACTION CYCLE
    Sales are made to users of pool supplies. Pool supplies are displayed and orders for
    products are taken in the showroom. The traveling salesmen also take orders. The distribution
    center is located on the same lot as the showroom/office building. It is here that the orders are
    filled and shipped.
    Order Processing
    All sales are credit sales, which are subject to the approval of Ed. Ed approves credit
    based on his "gut" feeling for each individual case and on the opinions of his bowling buddies.
    Generally, Ed wants to make the sales and few orders are not approved. In the few cases where
    Ed does not approve the credit, he marks his copy of the sales order accordingly. He makes a
    copy of all of the disapproved orders and two copies of the approved orders. He sends the one
    copy of both the approved and disapproved orders and all of the original orders to Mary. He
    sends a copy of the approved orders to the twins so they can fill them.
    Mary prepares a report for each salesperson listing both the sales orders turned down for
    credit and the approved sales and sends the reports along with the marked sales order to the
    salespeople. The salespeople notify customers of disapproved credit and then throw the reports
    and sales orders in their car trunks or wastebaskets. Mary files the copies of the approved orders
    until a shipping notice is received. The copies of the disapproved orders are thrown away.

    Shipping
    Out of town orders are shipped common carrier FOB Destination. Recently, Ed had a
    brief meeting with the twins about the possibility of sending the bulk of freight shipments
    through one common carrier, Iron Rooster Trucking Company. The advantage to Mary’s
    Sunshine would be a rebate paid quarterly of up to 15% of freight charges. Based on prior years'
    business, this rebate would total in excess of $15,000 per year. Without giving this practice
    much thought, Ed told the twins to begin using Iron Rooster as much as possible.
    The twins take all of the approved orders, find and box the merchandise and prepare a bill
    of lading for the carrier. The twins send their copy of the sales order marked "shipped" and a
    copy of the bill of lading to Mary.
    After an order has been shipped, the twins update the inventory cards to keep an accurate
    record of items on hand.
    At the end of the week, all of the inventory cards are reviewed and a weekly shipments
    report is prepared.
    Accounts Receivable
    Mary matches the sales order marked "shipped” to her copy of the sales order. She then
    prepares a two-part invoice and mails the original to the customer. She records the sales in the
    sales journal and the receivables in the subsidiary ledger. Mary files by date her copy of the
    invoice with her copy of the sales order and the shipping documents.
    During the summer season, Mary’s Sunshine often has difficulty in shipping customer
    orders in a timely manner. Supplier delays in delivery to Mary’s Sunshine and increased volume
    cause delays in outgoing shipments. At the end of some months, Mary prepares and mails
    customer invoices ahead of actual shipment. She claims this practice more closely matches
    revenues and expenses. As usual, Mary records the sales in the sales journal and in the accounts
    receivable subsidiary ledger.
    Customers are allowed to take a 2% discount if they pay within 10 days of the billing
    date; otherwise, the net amount is due in 30 days.
    Once per month, Mary prepares a listing of delinquent customers that she sends to the
    salespeople. They are responsible for collecting the overdue amounts.
    Cash Receipts
    Mary opens the mail each day; sorts the cash receipts and the invoices to be paid and logs
    them in the appropriate logs. Mary records the receipts on customers account in the cash receipts
    journal and in the accounts receivable subsidiary ledger. After recording all the cash receipts,
    she prepares a deposit slip and takes the cash to the bank.

    DISBURSEMENT CYCLE
    Purchasing
    Every Friday afternoon, the salespeople prepare weekly sales reports from their copies of
    the sales orders. They send the reports to Ed and then refile their sales orders by customer name.
    Ed reviews the weekly sales reports and the weekly inventory reports prepared by Fred and Ted.
    Ed "eyeballs" the numbers, notes any shortages in inventory, and prepares 3-part purchase
    orders. He mails the original to the vendor, sends one to the twins in the distribution center and
    one copy to Mary.
    As noted above, Fred and Ted have a card file for keeping track of inventory. Each card
    has a running balance to expedite the preparation of the weekly inventory reports for Ed. When
    they receive a copy of a purchase order, they pull the cards for the item(s) ordered, record the
    quantity ordered and the P.O. number, and file the purchase order in numerical order. When the
    shipment arrives, Fred and Ted pulls the purchase order to make sure that the items received
    were the items ordered and note any back orders on the purchase order. Then they pull the
    inventory cards, mark the items received, and prepare a receiving report that is sent to Mary.
    Cash Disbursements
    As noted above, Mary opens the mail and separates and logs the cash receipts and the
    invoices to be paid. Invoices are filed in alphabetical order by due date. Each Thursday, Mary
    pulls the invoices that are due that week and types three-part checks. The checks, along with the
    invoices, are given to Ed for his approval and signature. After Ed signs the checks, Mary mails
    the original, files the second copy in check number order, and attaches the third copy to the
    invoice. She then enters the check in the cash disbursement journal and the accounts payable
    subsidiary ledger. The third copy of the check and the attached invoice are filed alphabetically
    by vendor name.
    Payroll
    A full service payroll processing company called Payroll Paid Promptly (PPP) processes
    payroll. PPP calculates the payroll, creates and mails the checks to the employees and remits all
    payroll taxes and other withholdings to the appropriate locations. They send Mary a report once
    per month reflecting the transactions made on behalf of PPP. Mary prepares a journal entry to
    reflect the payroll and updates the general ledger. PPP charges a fee of 10% of the gross payroll
    for the payroll service. Mary prepares the check for these services once per month.
    The employees, who are paid once a month, are as follows:
    Lauren Allen, a salesperson at the showroom
    Paul Barton and Ernest Callahan, traveling salesmen
    Fred and Ted Hill, twins who work at the distribution center

    ETHC445 week 3

    ETHC445 week 3

    Question

    ETHC-445 Principles of Ethics - Week 3

    Consider these three problems. In writing a paper about all three of them individually, identify the consequences of the actions taken, and then determine whether the actions taken represented a greater good, who would benefit from the good, and whether the consequences ethically justify the decisions and actions.

    The Mayor of a large city was given a free membership in an exclusive golf club by people who have received several city contracts. He also accepted gifts from organizations that have not done business with the City but might in the future. The gifts ranged from $200 tickets to professional sports events to designer watches and jewelry.

    A college instructor is pursuing her doctorate in night school. To gain extra time for her own studies, she gives her students the same lectures, the same assignments, and the same examinations semester after semester without the slightest effort to improve them.

    Todd and Edna have been married for three years. They have had serious personal problems. Edna is a heavy drinker, and Todd cannot keep a job. Also, they have bickered and fought constantly since their marriage. Deciding that the way to overcome their problems is to have a child, they stop practicing birth control, and Edna becomes pregnant.

    Using what you have learned from our discussions and readings up to this week, write an answer to all three parts.

    How would Locke have addressed or solved the problem?

    Explain how his ethics and the answer he may have given are different or the same as yours.

    Be sure to complete your readings before beginning this assignment. The paper length should be about two pages double spaced. Write your answer and save it in a Word document, entitled,

    Tax effects of acquisition Connors Shoe Company

    Tax effects of acquisition Connors Shoe Company

    Question Tax effects of acquisition Connors Shoe Company is contemplating the acquisition
    of Salinas Boots, a firm that has shown large operating tax losses over the past few
    years. As a result of the acquisition, Connors believes that the total pretax profits of
    the merger will not change from their present level for 15 years. The tax loss carryforward
    of Salinas is $800,000, and Connors projects that its annual earnings before
    taxes
    will be $280,000 per year for each of the next 15 years. These earnings are
    assumed
    to fall within the annual limit legally allowed for application of the tax loss
    carryforward
    resulting from the proposed merger (see footnote 2 on page 719). The
    firm
    is in the 40% tax bracket.
    a.
    If Connors does not make the acquisition, what will be the company’s tax lia-
    bility and earnings after taxes each year over the next 15 years?
    b. If the acquisition is made, what will be the company’s tax liability and earnings
    after taxes each year over the next 15 years?
    c. If Salinas can be acquired for $350,000 in cash, should Connors make the acqui-
    sition, judging on the basis of tax considerations? (Ignore present value.)


    2. Asset acquisition decision Zarin Printing Company is considering the acquisition of
    Freiman Press at a cash price of $60,000. Freiman Press has liabilities of $90,000.
    Freiman has a large press that Zarin needs; the remaining assets would be sold to net
    $65,000. As a result of acquiring the press, Zarin would experience an increase in cash
    inflow of $20,000 per year over the next 10 years. The firm has a 14% cost of capital.
    a. What is the effective or net cost of the large press?
    b. If this is the only way Zarin can obtain the large press, should the firm go ahead
    with the merger? Explain your answer.
    c. If the firm could purchase a press that would provide slightly better quality and
    $26,000 annual cash inflow for 10 years for a price of $120,000, which alternative
    would you recommend? Explain your answer.