Blog

STATS Multiple Problems

STATS Multiple Problems

Question

Problems
1. The probability distribution shown here describes a population of measurements that can assume values of 3, 4, 5, and 6, each of which occurs with the same relative frequency.
x p(x)
3 0.25
4 0.25
5 0.25
6 0.25
a. Calculate the mean of all the different samples of n=2 measurements that can be selected from this population. Select the correct choice below.
A. Sample 3.3/ 3.4/ 3.5 /3.6/ 4.3/ 4.4/ 4.5/ 4.6
X ___ ___ ___ ___ ____ ___ ___ _____
Sample 5.3 / 5.4 / 5.5 / 5.6/ 6.3/ 6.4/ 6.5/ 6.6
X ___ ___ ___ ___ __ ___ ___ _____

B. Sample 3.3 / 3.4/ 3.5/ 3.6/ 4.4 / 4.5 / 4.6 / 5.5 / 5.6 /6.6
X ___ ___ ___ ___ ___ ___ ___ __ ___ ____
C. Sample 3.4 / 3.5 / 3.6 / 4.3 / 4.5 / 4.6/ 5.3/ 5.4/ 5.6/ 6.3/ 6.4 / 6.5
X ___ ___ ___ ___ ___ ___ ___ __ ___ __ ___ ___
b. If a sample of n=2 measurements is randomly selected from the population, what is the probability that a specific sample will be selected?____ (Type exact number in the simplest form)
c. Complete the sampling distribution table.
x 3 _____ 4 4.5 _____ ____ 6
Probability ____ 1/8 ____ 0.25 3/16 1/8 ____
Type exact numbers in the simplest form

2. Suppose a random sample of n=16 measurements is selected from a population with a mean ? and standard deviation ?. For each of the following values of ? and ? give the values of ux- and ?x-
a. u=12 ?=2;
b. u=144 ?=16;
c. u=24 ?=24;
d. u=12 ?=80
a.ux-= __ ?-x = ____ (type an integer or a decimal)
b.ux-= __ ?-x = ____ (type an integer or a decimal)
c.ux-= __ ?-x = ____ (type an integer or a decimal)
d. ux-= __ ?-x = ____ (type an integer or a decimal)

3. A random sample of n=100 observations is selected from a population with ? =30 and ?=22. Approximate the probabilities shown below.
Round to three decimal places
a.P(x ? 28) =
b. P(22.1 ? x ? 26.8) =
c. P(x ? 28.2) =
d. P(x ? 27.0) =

4. A random sample of 89 observations produced a mean x=26.1 and a standard deviation s=2.7.
( Use integer or decimals for any numbers in the expression. Round to 2 decimal places as needed)
a. Find a 95% confidence interval is. ___ ___
b. The 90% confidence interval for ? is. ___ ___
c. The 99% confidence interval for ?.___ ___

5. The random sample shown below was selected from a normal distribution.
5, 8, 9, 6, 4, 4
a. Construct a 99% confidence interval for the population mean u. (round to 2 decimal places)
b. Assume that sample mean x and sample standard deviation remain exactly the same as those you just calculated but they are based on the sample of n=25 observations. Repeat part a. What is the effect of increasing the sample size on the width of the confidence interval?
The confidence interval is ___ ___ (round to 2 decimal places)
What is the effect of the sample size on the width of the confidence intervals?
a. as the sample size increases the width increases
b. as the sample size increases the width decreases
c. as the sample size increases the width stays the same

6. For the binomial sample information summarized below indicate whether the sample size is large enough to use the large sample approximation to construct a confidence interval for p.
n=100, p=0.60
Is the sample size large enough?
• No because np > 15 and nq 15 and nq > 15
• No because np < 15 and nq < 15

7. A newspaper reported that 80% of people say that some coffee shops are overpriced. The source of this information was a telephone survey of 200 adults.
a. Identify the population of interest.
Coffee shops/ 200 adults/ 80% of adults/ newspapers /a telephone survey
b. Identify the sample for the study
80% of adults/ newspapers/ coffee shops/ 200 adults/ adults/ telephone survey
c. Identify the parameter of interest in the study
p, the population proportion of adults who say that some coffee shops are overpriced.
d. The 95% confidence interval for the parameter interest is ___ ___ (round to 2 decimal places)

8. If you wish to estimate a population mean with a sampling distribution error SE=0.21 using a 95% confidence interval and you know from prior sampling that ?2 (thats squared) is approximately equal to 8.1 how many observations would have to be included in your sample?
The number of observations that would have to be is____rnd to nearest obvser.

9.. Suppose N=80,000, n=20,000, and s=50.

a. What is the standard error of x?

b. What is the standard error of x if n=40,000?

c. What is the standard error of x if n=80,000?

d. What happens to the standard error of x as n is increased?

It stays the same

It increases

It decreases

There is no correlation

10. Suppose you want to estimate a population proportion , p, and p^=0.36 and N=6,400, and n=1,700. Find an approximate 95% confidence interval for p.

An appropriate 95% confidence interval for p is __ + ___


11. What is specifically observed or what participants are asked in research study is which of the following?

Management question

Investigative question

Research question

Management dilemma question

Measurement question

Graded case 2 Midland Energy Resources, Inc.

Graded case 2 Midland Energy Resources, Inc.

Question Corporate Financial Management 2014
Graded case 2: Midland Energy Resources, Inc.

Read the case material (case 4129) regarding the Midland Energy company. We see that Midland is a
company that has diversified into several (related) industries, which means not all divisions are likely
to be equally risky. Moreover, the proper discount rate will be influenced by a lot of other factors,
including taxes and leverage. As always, part of the problem is to determine which data sould be
used.

Prepare a report (this will be handed in through Blackboard, the same procedure as for the first case
will be used) that answers the following questions. Show your calculations in the report!

A. Determine Midland's corporate (enterprise-wide) WACC. Mention your main assumptions -
especially regarding the corporate tax rate used and the leverage ratio, but also regarding other
inputs - and explain why you think these numbers are the best in this situation.
B. Also conduct a sensitivity analysis on your answer in question A: what are the effects if the
corporate tax rate increases or decreases by 5 points (so, for example, from 22 to 17%; do not use
these numbers, investigate both an increase and a decrease) and if the company would recapitalize
to a debt/value ratio of 75% (using share repurchases).
C. Argue why a single corporate discount rate should or shouldn't be used by Midland. Explain the
consequences of making the wrong choice (between a single or different discount rates). Include in
your answers what will happen with divisions/companies that use a discount rate that is too low, and
compare with divisions/companies that use a discount rate that is too high, and what kind of
consequences this will have for the managers and their performance.
D. Compute a separate cost of capital for the E&P and marketing and refining divisions.Again,
mention and defend your assumptions, now place special emphasis on which betas and returns you
use.
E. Midland is active in different countries. Argue if the risk related to countries (e.g. political turmoil)
should be included in the WACC, and if so, how.

Wal-Mart paper corp

Wal-Mart paper corp

Question

Wal-Mart paper corp

Select either an international service organization or a multinational corporation and conduct a preliminary assessment of their website.

In your review:

1.) Explain your initial impression of the organization based upon your initial review of their corporate website.

2.) Analyze their Vision, Mission and Goals in reference to the company’s competitive strategy, branding and messaging

3.) Analyze the company’s strategic approach to globalization and their approach to competition, sustainability, CSR, marketing, analysis (external, internal, industry), and cross border issues

4.) Examine the company’s financials included in their most recent annual report and review the profit margin statement from the CEO. What conclusions can you draw from their financial statements

5.) Evaluate the firm’s Corporate Ethics and Corporate Social Responsibility Policy. What expectations are presented in the policy? Explain the tangibility of the company’s policies

6.) Include an organizational assessment using SWOT or Porter’s Five Forces

7.) Explain the company’s capacity to be able to fulfill strategic missions while increasing profit margin Include an Introduction and Summary statement in your review.

Your paper should be 7 pages in length, in correct APA format and use 4-5 outside sources.


ACCT-Chapter 5: Problem I: 5-34 Basis of PropertyReceived as a Gift

ACCT-Chapter 5: Problem I: 5-34 Basis of PropertyReceived as a Gift

Question
Chapter 5: Problem I: 5-34 Basis of PropertyReceived as a Gift

Doug receives a duplex as a gift from his uncle. The uncle’s basis for the duplex and land is $90,000. At the time of the gift, the land and building have FMV of $40,000 and $80,000, respectively. No gift tax is paid by Doug’s uncle at the time of the gift.

A. To determine gain, what is Doug’s basis for the land?
B. To determine gain, what is Doug’s basis for the building?
C. Will the basis of the land and building be the same as in Parts a and b for the purposes of determining loss?

Prepare a paper for Johnson & Johnson for one year plan investments.

Prepare a paper for Johnson & Johnson for one year plan investments.

Question Prepare a paper for Johnson & Johnson for one year plan investments. Please explain in the paper how to assess the next year currency of the British pound against the U.S. dollar. The plan for will take place in Germany, and it denominated in euros, our group will have to determine how British pound fairs against the U.S. dollar.
Please write a paper what will be the duties of an operational head for this project. Please mention everything in details about Johnson and Johnson.
As a financial analyst, you are asked to advise a MNC about its one-year investment plan next year in Germany. Because the investment is denominated in euros, you are asked to forecast how the British pound value may change against the U.S. dollar over the 1-year period. For your assessment, use all of the three major forecasting techniques.

Fundamental forecasting
Technical forecasting
Market-based forecasting


4-5 pager

trident Log301 module 2 case study and SLP

trident Log301 module 2 case study and SLP

Question module 2 case study and SLP

Welcome to the second case study for this course.

Assignment: Please read the article below (available through ProQuest), then in a 3-4 page paper discuss the article and integrated supply chains.

Assignment Expectations: The authors of the article do a pretty good job of explaining the concept but I would like you to tell me what they mean in your own words. What is an integrated supply chain? What are the key elements/challenges in an integrated supply chain? What are the specific benefits to firms that implement superior supply chain management?Write a 3-4 page paper, using the same format as module one.

Integrated supply chains to be explored Alan Johnson. Manufacturers' Monthly. Sydney: May 2007. pg. 24.

Abstract:
"The key challenge is to integrate supply chain capabilities to provide a seamless solution from potential design through to end delivery. End users are looking for a complete supply chain where there is single accountability and responsibility for delivery," said O'[Brien].

module 2 SLP

Welcome to the second SLP for this course.

Assigment: This is a very simple assignment. I want you to look at the supply chain design of the organization you are examining and answer the following questions.

Does your organization operate in a superior or poorly designed supply chain? Is the organization's supply chain maximizing its efficiency?

Assignment Expectations: Discuss at least one specific area that you feel the firm's supply chain performance could be improved. Explain your reasoning. Use information from references about your company. Be sure to provide the references you use. The paper should be 2-3 pages.

Submit your assignment for grading by the end of this module Use the same format as your module one paper, make sure you annotate your sources of information appropriately.




ACC 561- WileyPlus, Week 4 Assignment Excersies

ACC 561- WileyPlus, Week 4 Assignment Excersies

Question


ACC 561- WileyPlus, Week 4 Assignment Excersies

Exercise 15-5

Duggan Company applies manufacturing overhead to jobs on the basis of machine hours used. Overhead costs are expected to total $353,920 for the year, and machine usage is estimated at 126,400 hours.
For the year, $368,283 of overhead costs are incurred and 130,100 hours are used.

(a)Compute the manufacturing overhead rate for the year. (Round answers to 2 decimal places, e.g. 1.25.)
Manufacturing overhead rate $ _________per machine hour

(b) What is the amount of under or over-applied overhead at December 31?
(c) Prepare the adjusting entry to assign the under or over-applied overhead for the year to cost of goods sold.

Exercise 16-3
The ledger of Custer Company has the following work in process account.

Work in Process—Painting
5/1Balance 4,170
5/31Materials 7,190
5/31Labor 3,510
5/31Overhead 2,210
5/31Transferredout ?
5/31Balance ?

Production records show that there were 500 units in the beginning inventory, 30% complete, 1,460 units started, and 1,450 units transferred out. The beginning work in process had materials cost of $2,480 and conversion costs of $1,690. The units in ending inventory were 40% complete. Materials are entered at the beginning of the painting process.

Instructions
(a) How many units are in process at May 31?
(b) What is the unit materials cost for May?
(c) What is the unit conversion cost for May?
(d) What is the total cost of units transferred out in May?
(e) What is the cost of the May 31 inventory?

Exercise 17-1
Wilkins Inc. has two types of handbags: standard and custom. The controller has decided to use a plantwide overhead rate based on direct labor costs. The president has heard of activity-based costing and wants to see how the results would differ if this system were used. Two activity cost pools were developed: machining and machine setup. Presented below is information related to the company’s operations.

Standard Custom
Direct labor costs $43,700 $102,000
Machine hours 1,500 1,380
Setup hours 96 440

Total estimated overhead costs are $298,400. Overhead cost allocated to the machining activity cost pool is $195,100, and $103,300 is allocated to the machine setup activity cost pool.

Instructions
(a) Compute the overhead rate using the traditional (plant-wide) approach.
(b) Compute the overhead rates using the activity-based costing approach.
(c) Determine the difference in allocation between the two approaches.

Columbia BUSI 595 all discussions

Columbia BUSI 595 all discussions

Question

Week 1discussion

The role that organizational mission and vision statements have in determining future strategic plans.

Week 2 discussion

The impact of baby boomers on business organizations today and in the future.

Week 3 discussion

What is the relevance of the resource-based view to strategic management?

Week 5 discussion

Are functional strategies interdependent, or can they be formulated independently of other functions?

Week 6 discussion

How should a corporation attempt to achieve synergy among functional areas and strategic business units?

Week 7 discussion

Examples of behavior controls, input controls, and output controls within your current organization or job assignment.

Two Finance Related Problems

Two Finance Related Problems

Question

1. Given the following information, answer the following questions: TR = $3Q TC = $1500 + $2Q a. What is the break-even level of output? b. If the firm sells 1300 units, what are its earnings for losses? c. If sales rise to 2000 units, what are the firm's earnings or losses? d. If the total cost equation were TC = $2000 + $1.80Q, what happens to the break-even level of output units? 2. Determine the current market prices of the following $1000 bonds if the comparable rate is 10% and the answer the following questions. XY 5.25% (interest paid annually) for 20 years AB 14% (interest paid annually) for 20 years a. Which bond has a current yield that exceeds the yield to maturity? b. Which obnd may you expect to be called? Why? c. If CD, Inc., has a bond with a 5.25% coupon and a maturity of 20 years but which was lower rated, what would be its price relative to the XY, Inc., bond? Explain.

2. Two mutuallly exclusive investments cost $10,000 each and have the following cash inflows. The cost of capital is 12%. Investment year 1 - $12,407 and Year 4 is $19,39), wht is the net present value of each investment? What is the internal rate of return of each investment? Which investment(s) should the firm make? Would your answer be different to C if the funds received in Year 1 for investment A could be reinvested at 16%? Show work.

Two mutually exclusive investments cost $10,000 each and have the following cash inflows. The firm's cost of capital is 12%?

Investment

Cash inflow A B

Year 1 $12,407 --

Year 2 -- --

Year 3 -- ---

Year 4 -- $19,390

a. What is the net present value of each investment?

b. What is the internal rate of return of each investment?

c. Which investment(s) should the firm make?

d. Would your answer be different to c if the funds received in Year 1 for investment A could be reinvested at 16%? Show the work.