Blog

answer the questions

answer the questions

Question

Starting a Conversation: Respond to “In Praise of Chain Stores”

Every well-traveled cosmop­olite knows that America is mind-numbingly monotonous—the most boring country to tour, because everywhere looks like everywhere else,” as the columnist Thomas Friedman once told Charlie Rose. Boston has the same stores as Denver, which has the same stores as Charlotte or Seattle or Chicago. We live in a “Stepford world,” says Rachel Dresbeck, the author ofInsiders’ Guide to Portland, Oregon. Even Boston’s historic, she complains, is “dominated by the Gap, Anthropologie, Starbucks, and all the other usual suspects. Why go anywhere? Every place looks the same.” This complaint is more than the old worry,back to the 1920s, that the big guys are putting Mom and Pop out of business. Today’s critics focus less on what isn’t there—Mom and Pop—than on what is. Faneuil Hall actually has plenty of locally owned businesses, from the Geoclassics store selling minerals and jewelry, to Pizzeria Regina (“since 1926”). But you do find the same chains everywhere.

The suburbs are the worst. Take Chandler, Arizona, just south of Phoenix. At, the area’s big shopping mall, you’ll find P. F. Chang’s, California Pizza Kitchen, Chipotle Mexican Grill, and the Cheesecake Factory. Drive along Chandler’s straight, flat boulevards, and you’ll see Bed Bath & Beyond and Linens-n-Things; Barnes & Noble and Borders; PetSmart and Petco; Circuit City and Best Buy; Lowe’s and; CVS and Walgreens. Chandler has the Apple Store and Pottery Barn, the Gap and Ann Taylor, Banana Republic and DSW, and, of course, Target and Wal-Mart, Starbucks and McDonald’s. For people allergic to brands, Chandler must be hell—even without the 110-degree days.

One of the fastest-growing cities in the country, Chandler is definitely the kind of place urbanists have in mind as they intone, “When every place looks the same, there is no such thing as place anymore.” Like so many towns in America, it has lost much of its historic character as a farming community. The annualstill honors one traditional product, but these days Chandler raises more subdivisions and strip malls than ostrich plumes or cotton, another former staple. Yet it still refutes the common assertion that national chains are a blight on the landscape, that they’ve turned American towns into an indistinguishable “geography of nowhere.”

The first thing you notice in Chandler is that, as a broad empirical, the cliché that “everywhere looks like everywhere else” is obvious nonsense. Chandler’s land and air and foliage are peculiar to the desert Southwest. The people dress differently. Even the cookie-cutter housing developments, with their xeriscaping and washed-out desert palette, remind you where you are. Forget New England clapboard, Carolina columns, or yellow Texas brick. In the intense sun of Chandler, the red-tile roofs common in California turn a pale, pale pink.

Stores don’t give places their character. Terrain and weather and culture do. Familiar retailers may take some of the discovery out of travel—to the consternation of journalists looking for obvious local color—but by holding some of the commercial background constant, chains make it easier to discern the real differences that define a place: the way, for instance, that people in Chandler come out to enjoy the summer twilight, when the sky glows purple and the dry air cools.

Besides, the idea that America was once filled with wildly variedestablishments is largely a myth. Big cities could, and still can, support more retail niches than small towns. And in a less competitive national market, there was certainly more variation in business efficiency—in prices, service, and merchandise quality. But the range of retailingideasin any given town was rarely that great. One deli or diner or lunch counter or cafeteria was pretty much like every other one. A hardware store was a hardware store, a pharmacy a pharmacy. Before it became a ubiquitous part of urban life, Starbucks was, in most American cities, a radically new idea

Chains do more than bargain down prices from suppliers or divide fixed costs across a lot of units. They rapidly spread economic discovery—the scarce and costly knowledge of what retail concepts and operational innovations actually work. That knowledge can be gained only through the expensive and time-consuming process of trial and error. Expecting each town to independently invent everyis a prescription for real monotony, at least for the locals. Chains make a large range of choices available in more places. They increase local variety, even as they reduce the differences from place to place. People who mostly stay put get to have experiences once available only to frequent travelers, and this loss of exclusivity is one reason why frequent travelers are the ones who complain. When Borders was a unique Ann Arbor institution, people in places like Chandler—or, for that matter, Philadelphia and Los Angeles—didn’t have much in the way of bookstores. Back in 1986, when California Pizza Kitchen was an innovative local restaurant about to open its second location, food writers at the L.A.Dailydeclared it “the kind of place every neighborhood should have.” So what’s wrong if the country has 158 neighborhood CPKs instead of one or two?

The process of multiplication is particularly important for fast-growing towns like Chandler, where rollouts of established stores allow retail variety to expand as fast as the growing population can support. I heard the same refrain in Chandler that I’ve heard in similar boomburgs elsewhere, and for similar reasons. “It’s got all the advantages of a small town, in terms of being friendly, but it’s got all the things of a big town,” says Scott Stephens, who moved from Manhattan Beach, California, in 1998 to work for Motorola. Chains let people in a city of 250,000 enjoy retail amenities once available only in a huge metropolitan center. At the same time, familiar establishments make it easier for people to make a home in a new place. When Nissan recently moved its headquarters from Southern California to Tennessee, an unusually high percentage of its Los Angeles–area employees accepted the transfer. “The fact that Starbucks are everywhere helps make moving a lot easier these days,” a rueful Greg Whitney, vice president of business development for the Los Angeles County Economic Development Corporation, told theLos Angeles Timesreporter John O’Dell. Orth Hedrick, aproduct manager, decided he could stay with the job he loved when he turned off the interstate near Nashville and realized, “You could really be Anywhere, U.S.A. There’s a great big regional shopping mall, and most of the stores and restaurants are the same ones we see in California. Yet a few miles away you’re in downtown, and there’s lots of local color, too.”

Contrary to the rhetoric of bored cosmopolites, most cities don’t exist primarily to please tourists. The children toddling through the Chandler mall hugging their soft Build-A-Bear animals are no less delighted because kids can also build a bear in Memphis or St. Louis. For them, this isn’t tourism; it’s life—the experiences that create the memories from which the meaning of a place arises over time. Among Chandler’s most charming sights are the-casual dads joining their wives and kids for lunch in the mall food court. The food isn’t the point, let alone whether it’s from Subway or Dairy Queen. The restaurants merely provide the props and setting for the family time. When those kids grow up, they’ll remember the food court as happily as an older generation recalls the diners and motels of Route 66—not because of the businesses’ innate appeal but because of the memories they evoke.

The contempt for chains represents a brand-obsessed view of place, as if store names were all that mattered to a city’s character. For many critics, the name on the store reallyisall that matters. The planning consultant Robert Gibbs works with cities that want to revive their downtowns, and he also helps developers find space for retailers. To his frustration, he finds that many cities actually turn away national chains, preferring a moribund downtown that seems authentically local. But, he says, the same local activists who oppose chains “want specialty retail that sells exactly what the chains sell—the same price, the same fit, the same qualities, the same sizes, the same brands, even.” You can show people pictures of a Pottery Barn with nothing but the name changed, he says, and they’ll love the store. So downtown stores stay empty, or sell low-value tourist items like candles and kites, while the chains open on the edge of town. In the name of urbanism, officials and activists in cities like Ann Arbor and Fort Collins, Colorado, are driving business to the suburbs. “If people like shopping at the Banana Republic or the Gap, if that’s your market—or Payless Shoes—why not?” says an exasperated Gibbs. “Why not sell the goods and services people want?”

In your writer’s notebook, record your analysis of Postrel’s essay by responding to the following questions:

  1. Postrel’s argument is more specific and thorough than her title might suggest. What is her thesis? What does she expect readers to believe or do after reading her essay?

  1. Postrel’s introductory paragraphs quote writers and pundits who dislike retail chains, without disputing them. What purposes do these paragraphs serve in her essay? Why is it essential for her argument to cite these views early on?

  1. Who or what are “cosmopolites,” and how are they related to readers of The Atlantic Monthly? According to Postrel, what do their assumptions about small towns reveal about their social, economic, and geographic biases?

  1. Postrel refers to “place” and “local color” at several points in her essay. What do these terms mean? In what ways are their definitions central to her argument?

  1. According to Postrel, how might a misplaced hostility to retail chains actually harm some communities? What specific advantages does she claim these stores provide, and who benefits from them? What kinds of evidence does she offer to prove her point?

general business data bank accounts

general business data bank accounts

Question

51. In regard to the investigation of variances under uncertainty, which of the following is not a positive (i.e., desirable) combination of courses of actionand states of nature?

A. Investigate; a random fluctuation has occurred.

B. Do not investigate; a random fluctuation has occurred.

C. Do not investigate; a noncontrollable fluctuation has occurred.

D. Investigate; a nonrandom fluctuation has occurred.

52. The difference between the total factory overhead cost in the flexible budget for the actual units produced and the amount of factory overhead cost applied to products using the standard overhead rate is called the factory overhead ______________

A. Flexible-budget variance.

B. Production-volume variance.

C. Total fixed cost variance.

D. Efficiency variance.

E. Controllable variance.

53. The difference between total factory overhead cost incurred during a period and the total standard factory overhead cost assigned to production of the period is the ______________

A. Flexible-budget variance.

B. Production-volume variance.

C. Total factory overhead variance.

D. Overhead efficiency variance.

E. Total overhead spending variance.

54. For product-costing purposes, which of the following statements is true?

A. It is necessary to "unitize" fixed overhead costs, under the absorption or full-costing approach.

B. The amount of standard fixed overhead costs for product-costing and control purposes is the same.

C. Only standard variable overhead costs are included since these costs change in response to cost drivers.

D. Standard costing is not permissible under generally accepted accounting principles.

E. Total fixed overhead costs are applied as a "lump-sum" amount.

55. All of the following choices exist for defining the denominator volume (denominator activity level) for assigning fixed overhead costs in a standard cost system, except:

A. Budgeted capacity utilization.

B. Actual capacity utilization.

C. Theoretical capacity.

D. Practical capacity.

E. Normal capacity.

56. In terms of allocating fixed overhead cost to products, generally accepted accounting principles:

A. Require that such allocations be based on normal capacity.

B. Allow for the use of either practical capacity or theoretical capacity.

C. Don't apply since the resulting data are used only internally (for control purposes).

D. Specify only that such costs be "reasonably allocated" to outputs.

57. For internal reporting purposes, it is recommended that fixed overhead allocation rates in a standard costing system be based on:

A. Budgeted capacity usage.

B. Theoretical capacity since this is the level required under generally accepted accounting principles.

C. Actual capacity utilization.

D. Expected capacity usage.

E. Practical capacity.

58. The "death-spiral" effect refers to:

A. The allocation of fixed overhead costs over time to an increasing volume of output.

B. A possible consequence when variable, not full, costing is used.

C. A likely consequence when fixed overhead allocation rates are based on practical capacity.

D. The continual raising of prices in an attempt to recover fixed costs.

E. Increases in product demand over time in response to increases in fixed promotional costs.

59. Which one of the following journal entries in a standard cost system is needed to record the completion of production for the period?


A. A debit to Work-in-Process Inventory, at standard cost.

B. A debit to Work-in-Process Inventory, at actual cost.

C. A credit to Cost of Goods Sold, at standard cost.

D. A debit to Finished Goods Inventory, at standard cost.

E. A debit to Finished Goods Inventory, at actual cost.

60. Which one of the following journal entries in a standard cost system is needed at the end of the period to close out to Cost of Goods Sold an unfavorable production-volume variance?

A. A credit to Finished Goods Inventory, at standard cost.

B. A credit to Cost of Goods sold, at standard cost.

C. A credit to Cost of Goods sold, at actual cost.

D. A debit to the Production-Volume Variance account.

E. A debit to Cost of Goods sold.

61. Which one of the following journal entries in a standard cost system would be used to apply factory overhead costs to production?

A. A debit to the factory overhead account, at standard cost.

B. A credit to the factory overhead account, at standard cost.

C. A debit to WIP inventory, at actual cost.

D. A credit to Finished Goods Inventory, at standard cost.

62. Some accountants would argue that any variances from standard costs, when such standards are current, should be written off to cost of goods sold. The principal rationale for this treatment is:

A. This is the treatment required currently under generally accepted accounting principles.

B. To allocate such variances implies that asset values on the balance sheet (i.e., inventories) contain the cost of inefficiencies.

C. The negligible effect this treatment has on total cost of goods sold for the period.

D. Consistency with current income tax provisions.

63. If standard cost variances are allocated (i.e., prorated) to inventory and cost of goods sold (CGS) accounts at the end of a period, which of the following is correct?

A. Conceptually, the amount allocated to each account is based on the relative amount of the current period's standard cost in the end-of-period balance in each account.

B. The resulting balances represent relative actual cost in each of the affected accounts.

C. There is a presumption that the net variance for the period is immaterial in amount.

D. The amount allocated to inventories is generally larger than the amount allocated to CGS.

64. Which of the following statement is true regarding choice of the denominator volume level in conjunction with the process of allocating fixed manufacturing costs to production?

A. The choice typically will affect end-of-period asset values, but not the production-volume variance for the period.

B. The choice is important only if the company in question uses variable costing.

C. Under absorption (full) costing, this choice can affect reported profits for the period.

D. This choice has no effect on the standard overhead cost-allocation rate.

E. The choice affects the standard overhead cost-allocation rate but not product cost.

65. When a company uses absorption costing, there is the potential for income manipulation based on choice of the denominator volume for setting the fixed overhead allocation rate. In which case is this manipulation-potential manifested?

A. When sales volume > production volume, and the production-volume variance is prorated to inventories and cost of goods sold at the end of the period.

B. When sales volume < production volume, and the production-volume variance is prorated to inventories and cost of goods sold at the end of the period.

C. When the production-volume variance is written off entirely as an adjustment to cost of goods sold at the end of the period.

D. When budgeted output is used to develop the standard overhead cost-allocation rate.

66. The following budget data pertain to the Machining Department of Yolkenverst Co.:

The company prepared the budget at 85% of the maximum capacity level. The department uses machine hours as the basis for applying standard factory overhead costs to production. The standard fixed overhead application rate for the Machining Department is:

A. $2.89 per machine hour.

B. $3.40 per machine hour.

C. $3.47 per machine hour.

D. $4.08 per machine hour.

E. $8.50 per machine hour.

67.The following budget data pertain to the Machining Department of Yolkenverst Co.:

The company prepared the budget at 85% of the maximum capacity level. The department uses machine hours as the basis for applying


standard factory overhead costs to production. The budgeted total factory overhead for the Machining Department is:

A. $617,100.

B. $875,000.

C. $883,500.

D. $892,500.

E. $1,050,000.

A. The following budget data pertain to the Machining Department of Yolkenverst Co.:

The company prepared the budget at 85% of the maximum capacity level. The department uses machine hours as the basis for applying standard factory overhead costs to production. During the year the Machining Department produced 50,000 units, consuming 127,500 machine hours and incurring $433,500 of fixed overhead. For the current year the department has a production-volume variance of:

A. $0.

B. $3,400 unfavorable.

C. $3,600 unfavorable.

D. $7,000 unfavorable.

E. $8,500 unfavorable.

69. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

The total actual variable factory overhead cost incurred during the year was:

A. $13,000.

B. $14,000.

C. $14,100.

D. $14,400.

E. $15,000.

F. A

70. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

The standard fixed overhead application rate is:

A. $1.00 per machine hour.

B. $2.00 per machine hour.

C. $3.00 per machine hour.

D. $4.00 per machine hour.

E. $5.00 per machine hour.

71. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

The variable overhead spending variance is:

A. $600 unfavorable.

B. $1,000 favorable.

C. $1,400 unfavorable.

D. $1,500 favorable.

E. $2,100 favorable.

72.

The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:


The variable factory overhead efficiency variance is:

A. $600 unfavorable.

B. $1,000 favorable.

C. $1,400 unfavorable.

D. $1,500 favorable.

E. $2,100 favorable.

73. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

The factory overhead production-volume variance is:

A. $600 unfavorable.

B. $1,000 favorable.

C. $1,400 unfavorable.

D. $1,500 favorable.

E. $2,100 favorable.

74. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

Under a three-variance breakdown (decomposition) of the total factory overhead variance, the total factory overhead spending variance is:

A. $0.

B. $600 unfavorable.

C. $1,400 favorable.

D. $1,400 unfavorable.

E. $2,000 favorable.

75. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

Under a three-variance breakdown (decomposition) of the total factory overhead variance, the factory overhead efficiency variance is:

A. $400 favorable.

B. $600 unfavorable.

C. $1,400 favorable.

D. $1,400 unfavorable.

E. $2,000 favorable.

76.

The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:


Under a three-variance breakdown (decomposition) of the total factory overhead variance, the factory overhead production-volume variance is:

A. $400 favorable.

B. $600 unfavorable.

C. $1,400 favorable.

D. $1,400 unfavorable.

E. $2,000 favorable.

77. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

Under a two-variance breakdown (decomposition) of the total factory overhead variance, the factory overhead controllable variance (i.e., total flexible-budget variance) is:

A. $400 favorable.

B. $600 unfavorable.

C. $1,400 favorable.

D. $1,400 unfavorable.

E. $2,000 favorable.

78. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

Under a two-variance breakdown (decomposition) of the total factory overhead variance, the factory overhead efficiency variance is:

A. $0.

B. $400 favorable.

C. $600 unfavorable.

D. $1,400 favorable.

E. $1,400 unfavorable.

79. The following information is available from Thinnews Co., a company that uses machine hours to apply factory overhead:

Under a two-variance breakdown (decomposition) of the total factory overhead variance, the factory overhead production-volume variance is:

A. $400 favorable.

B. $600 unfavorable.

C. $1,400 favorable.

D. $1,400 unfavorable.

E. $2,000 favorable.

80. Bonehead Co. has the following factory overhead costs:


The total overhead flexible-budget (FB) variance is:

A. $4,000 unfavorable.

B. $7,000 favorable.

C. $10,000 favorable.

D. $11,000 unfavorable.

E. $14,000 unfavorable.

81. Bonehead Co. has the following factory overhead costs:

The factory overhead production-volume variance is:

A. $4,000 unfavorable.

B. $7,000 favorable.

C. $10,000 favorable.

D. $11,000 unfavorable.

E. $14,000 unfavorable.

82. Bonehead Co. has the following factory overhead costs:

The total underapplied or overapplied factory overhead for the period is:

A. $4,000 underapplied.

B. $7,000 overapplied.

C. $10,000 overapplied.

D. $11,000 underapplied.

E. $14,000 underapplied.

83. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The standard variable overhead application rate per direct labor hour in 2010 was:

A. $4.30.

B. $4.50.

C. $6.90.

D. $9.30.

E. $9.60.

84. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The total budget for fixed factory overhead in 2010 was:

A. $230,400.

B. $259,200.

C. $265,200.

D. $276,480.

E. $288,000.

85.

Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:


During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. Under the assumption that the total budgeted fixed overhead for 2011 is the same as it was for 2010, what is the standard fixed overhead application rate per direct labor hour for 2011?

A. $4.30.

B. $4.50.

C. $6.90.

D. $9.30.

E. $9.60.

86. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The variable overhead efficiency variance in 2010 is:

A. $3,440 favorable.

B. $8,000 unfavorable.

C. $9,200 favorable.

D. $11,440 unfavorable.

E. $17,200 unfavorable.

87. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours.

The factory overhead spending variance in 2010, based on a three-variance breakdown (decomposition) of the total overhead variance is:

A. $3,200 favorable.

B. $11,440 unfavorable.

C. $15,040 favorable.

D. $17,280 favorable.

E. $17,440 unfavorable.

88. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The variable overhead spending variance in 2010 is:

A. $6,000 unfavorable.

B. $8,000 unfavorable.

C. $9,200 favorable.

D. $11,440 unfavorable.

E. $17,440 unfavorable.

89.

Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:


During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The fixed overhead production-volume variance in 2010 is:

A. $11,280 favorable.

B. $17,280 favorable.

C. $28,800 unfavorable.

D. $34,800 unfavorable.

E. $51,840 favorable.

90. Bluecap Co. uses a standard cost system and flexible budgets for control purposes. The following budgeted information pertains to 2010:

During 2010, Bluecap worked 28,000 direct labor hours and manufactured 9,600 units. The actual factory overhead was $14,000 greater than the flexible budget amount for the units produced, of which $6,000 was due to fixed factory overhead. In preparing a budget for 2011 Bluecap decided to raise the level of operation to 90% of capacity, to manufacture 9,000 units at a budgeted total of 27,000 direct labor hours. The total overhead variance in 2010 is:

A. $14,000 unfavorable.

B. $15,040 favorable.

C. $17,280 favorable.

D. $37,840 favorable.

E. $37,840 unfavorable.

91. Neptune Inc. uses a standard cost system and has the following information for April:

The total underapplied or overapplied factory overhead is:

A. $1,900 underapplied.

B. $1,900 overapplied.

C. $3,200 underapplied.

D. $3,200 overapplied.

E. $5,100 overapplied.

92. Neptune Inc. uses a standard cost system and has the following information for April:

The total factory overhead spending variance is:

A. $940 unfavorable.

B. $1,040 favorable.

C. $1,980 favorable.

D. $2,160 favorable.

E. $3,200 favorable.

93. Neptune Inc. uses a standard cost system and has the following information for April:

The factory overhead production-volume variance is:


A. $940 unfavorable.

B. $1,040 favorable.

C. $1,980 favorable.

D. $2,160 favorable.

E. $3,200 favorable.

94. Neptune Inc. uses a standard cost system and has the following information for April:

The variable factory overhead efficiency variance is:

A. $940 unfavorable.

B. $1,040 favorable.

C. $1,980 favorable.

D. $2,160 favorable.

E. $3,200 favorable.

95. Neptune Inc. uses a standard cost system and has the following information for April:

The total factory overhead flexible-budget variance is:

A. $940 unfavorable.

B. $1,040 favorable.

C. $1,980 favorable.

D. $2,160 favorable.

96. At the denominator activity level, Norland Company's total overhead budget for 25,000 units of production shows variable overhead costs of $36,000 and fixed overhead costs of $32,000. During the most recent period, the company incurred total overhead costs of $61,400 to manufacture 20,000 units. The total factory overhead flexible-budget variance is:

A. $200 favorable.

B. $600 unfavorable.

C. $6,000 unfavorable.

D. $6,600 favorable.

E. $7,000 unfavorable.

97. At the denominator activity level, Norland Company's total overhead budget for 25,000 units of production shows variable overhead costs of $36,000 and fixed overhead costs of $32,000. During the most recent period, the company incurred total overhead costs of $61,400 to manufacture 20,000 units. The total factory overhead variance is:

A. $200 favorable.

B. $600 unfavorable.

C. $6,000 unfavorable.

D. $6,600 favorable.

E. $7,000 unfavorable.

98. Xero Company's standard factory overhead rate is $3.75 per direct labor hour (DLH), calculated at 90% capacity = 900 standard DLHs. In December, the company operated at 80% of capacity, or 800 standard DLHs. Budgeted factory overhead at 80% of capacity is $3,150, of which $1,350 is fixed overhead. For December, the actual factory overhead cost was $3,800 for 840 actual DLHs, of which $1,300 was for fixed factory overhead. What is the factory overhead production-volume variance for December?

A. $0.

B. $150 unfavorable.

C. $225 favorable.

D. $425 unfavorable.

E. $650 unfavorable.

99. Xero Company's standard factory overhead rate is $3.75 per direct labor hour (DLH), calculated at 90% capacity = 900 standard DLHs. In December, the company operated at 80% of capacity, or 800 standard DLHs. Budgeted factory overhead at 80% of capacity is $3,150, of which $1,350 is fixed overhead. For December, the actual factory overhead cost was $3,800 for 840 actual DLHs, of which $1,300 was for fixed factory overhead. If the company uses a two-way breakdown (decomposition) of the total overhead variance, what is the total factory overhead flexible-budget variance for December?

A. N/A—this variance doesn't exist under a two-way breakdown of the total overhead variance.

B. $225 favorable.

C. $425 unfavorable.

D. $650 unfavorable.

E. $690 unfavorable.


100. Xero Company's standard factory overhead rate is $3.75 per direct labor hour (DLH), calculated at 90% capacity = 900 standard DLHs. In December, the company operated at 80% of capacity, or 800 standard DLHs. Budgeted factory overhead at 80% of capacity is $3,150, of which $1,350 is fixed overhead. For December, the actual factory overhead cost was $3,800 for 840 actual DLHs, of which $1,300 was for fixed factory overhead. Assuming the use of a two-way breakdown (decomposition) of the total overhead variance, what is the factory overhead efficiency variance for December?

A. N/A—this variance does not exist under a two-way breakdown of the total overead variance.

B. $90 unfavorable.

C. $150 unfavorable.

D. $225 favorable.

E. $425 unfavorable.

general business data bank

general business data bank

Question

1. U.S. businesses spent about ________ on online transactions with other businesses in 2002 as compared to consumer online purchases of $71 billion during the same time period.

a. $650 billion

b. $500 billion

c. $482 billion

d. $225 billion

e. $53 billion

2. With respect to e-procurement, Web sites are organized around two types of e-hubs: ________.

a. vertical and horizontal hubs

b. vertical and functional hubs

c. functional hubs and organizational hubs

d. supplier and user hubs

e. manufacturer and supplier hubs

3. With respect to e-procurement, Coca-Cola, Sara Lee, Kraft, PepsiCo, Gillette, P&G, and several other companies joined forces to form a ________ called Transora to use their combined leverage to obtain lower prices for raw materials.

a. manufacturer’s co-op

b. supplier’s co-op

c. middleman group

d. buying alliance

e. cabal


4. Business-to-business cyberbuying is flourishing on the Internet. So far, most of the products that businesses are buying electronically are ________, and travel and entertainment services.

a. promotion services such as advertising

b. HR services (e.g., employee recruitment)

c. MRO materials (maintenance, repair, and operations)

d. food services

e. marketing research services

5. Moving into e-procurement has many benefits. Which of the following would not be among those benefits?

a. Aggregating purchasing across multiple departments gains larger volume discounts.

b. Aggregating purchasing across multiple departments gains centrally negotiated volume discounts.

c. There is less buying of substandard goods from outside the approved list of suppliers.

d. A smaller purchasing staff is required.

e. Purchasing gains a significant leverage with top management because of its management team.

6. With respect to e-procurement commitment, in 2003 ________ was named number one in BtoBmagazine’s annual ranking of the top B-to-B Web sites because of its ability to generate sales (about 55 percent of the company’s total sales) and commitment to the process.

a. Coca-Cola

b. Dell Computers

c. Hewlett-Packard

d. Cadillac

e. Boeing

7. In the proposal solicitation process, ________ should be marketing documents that describe value and benefits in customer terms.

a. written proposals

b. oral proposals

c. e-proposals

d. alliance proposals

e. global proposals


8. Xerox qualifies only suppliers who meet the ISO 9000 quality standards, but to win the company’s top award—certification status—a supplier must first complete ________.

a. government certification

b. an extensive ethics statement evaluation

c. the Xerox Multinational Supplier Quality Survey

d. a company training and indoctrination period

e. a Malcolm Baldridge National Quality Award entry form and then enter

9. All of the following are considered to be methods of assessing customer value EXCEPT ________.

a. direct survey questions

b. exit interviewing

c. focus-group value assessment

d. conjoint analysis

e. benchmarks

10. According to purchasing professionals, which of the following is considered to be the major responsibility of the purchasing agent in supplier negotiations?

a. Forming networks for future business.

b. Assuring quality conformance.

c. Being fair with all parties.

d. To use a team approach in negotiations.

e. Negotiating price.

11. If an industrial buyer leases heavy equipment like machinery and trucks rather than purchasing them, the lessee gains several advantages. Which of the following would NOT be among those advantages?

a. Higher quality products.

b. Conserving capital.

c. Getting the latest products.

d. Receiving better service.

e. Some tax advantages.

12. “OTIFNE” is a term that summarizes three desirable outcomes of a B-to-B transaction: OT—deliver on time; IF—in full; and, NE—________.

a. no error

b. no emergencies

c. non-experimental

d. new entrepreneurs

e. need equipment

13. Corporate credibility depends on three factors: corporate expertise, corporate trustworthiness, and ________.

a. corporate manpower

b. corporate mission statement

c. corporate likeability

d. corporate governance

e. corporate management structure

14. Cannon and Perreault found that buyer-suppler relationships differed according to four factors. Which of the following would NOT be among those factors?

a. Importance of supply.

b. Complexity of supply.

c. Availability of alternatives.

d. Supply market dynamism.

e. Demand market conservatism.

15. According to Cannon and Perreault, buyer-supplier relationships fall into eight different categories. Which of the following relationships is characterized as being one that has much trust and commitment leading to a true partnership?

a. Mutually adaptive

b. Collaborative

c. Basic buying and selling

d. Customer supply

e. Cooperative systems

16. In the ________ category of Cannon and Perreault’s buyer-supplier relationship categorization, although bonded by a close, cooperative relationship, the seller adapts to meet the customer’s needs without expecting much adaptation or change on the part of the customer in exchange.

a. contractual transaction

b. cooperative system

c. collaborative

d. mutually adaptive

e. customer is king


17. Vertical coordination can facilitate stronger customer-seller ties but at the same time may increase the risk to consumer’s and supplier’s ________ (e.g., those expenditures tailored to a particular company and value chain partner).

a. logistics channel

b. independent operations

c. specific investments

d. leverage ability

e. liquidity situation

18. The ________ market consists of schools, hospitals, nursing homes, prisons, and other institutions that must provide goods and services to people in their care.

a. vertical

b. nonprofit

c. spot

d. secondary business

e. institutional

19. With purchases of $200 billion annually in goods and services, ________ is the largest customer in the world.

a. Wal-Mart

b. Grainger

c. the State of California

d. the U.S. government

e. Latin America

True/False

20. Webster and Wind define organizational buying as the decision-making process by which formal organizations establish the need for purchased products and services and identify, evaluate, and choose among alternative brands and suppliers.

21. The business market is essentially the same thing as the consumer market.

22. The demand for business goods is ultimately derived from the demand for raw materials.

23. The total demand for many business goods and services is inelastic—that is, not much is affected by price changes.

Answer: True

24. In the straight rebuy, “out-suppliers” try to get a small order and then enlarge their purchase share over time.

25. Over time, new-buy situations become straight rebuys and routine purchase behavior.

26. Most business buyers, preferring to spread their risk, reject what is called systems buying from one seller.

27. Systems selling is a key industrial marketing strategy in bidding to build large-scale industrial projects such as dams or pipelines.

28. The buying centeris where consumers go to purchase their goods and services.

29. Initiators are those who authorize the proposed action of deciders or buyers.

30. Users perform all seven roles in the buying center because of their direct tie to the product and what it is supposed to do.

31. The typical buying center has a minimum of two to three people even though large companies may have more performing this function.

73. Webster cautions that ultimately, organizations not individuals make purchasing decisions.

74. In the business market, small sellers concentrate on reaching as many participants as possible because their chances of success are slim.

75. To gold-standard customers, a seller is wise to use what is called quality selling.

76. To effectively sell to price-oriented customers, a company is wise to use transactional selling.


77. One of the forms of solution selling is to provide solutions to enhance customer revenues.Answer: True

78. Today, purchasing departments occupy a relatively low position in the management hierarchy and answer primarily to the vice-president of marketing.

79. If a company’s purchasing department focus is short term and tactical, it is said to have a buying orientation.

80. When business buyers work simultaneously to seek quality improvements and cost reductions, the business buyers are said to have a demand orientation.

Changing over from the old information system to a new one by turning off the old

Changing over from the old information system to a new one by turning off the old

Question

1 Question: Changing over from the old information system to a new one by turning off the old system as the new one is turned on best describes

A Phased installation

B Single location installation

C Parallel installation

D Direct installation

E Rotation installation


2
Question: On a data-flow diagram, a diamond represents a process.

A True

B False


3
Question: When designing the navigation procedures within your system, the primary concerns are

A The design of between-field navigation and the ability to provide feedback

B Grouping data fields into logical categories and assigning group labels

C Flexibility and consistency

D Formatting and meaningful labels

E Spacing and color differences


4
Question: Functional decomposition is a repetitive process of breaking the description or perspective of a system down into finer and finer detail.

A True

B False


5
Question: A ternary relationship is the equivalent of three binary relationships.

A True

B False


6
Question: In a file-oriented information system, a security file ____.

A Stores relatively permanent data about an entity

B Is created and saved for backup and recovery purposes

C Stores records that contain day-to-day business and operational data

D Is a temporary file created by an information system for a single task


7
Question: Which of the following types of maintenance accounts for as much as 70 percent of all maintenance activity?

A Preventive maintenance

B Corrective maintenance

C Adaptive maintenance

D Perfective maintenance

E Internal maintenance


8
Question: In a typical file processing environment, ____ problems can occur if updates are not applied in every file.

A Rigid data structure

B Data integrity

C Referential integrity

D Data redundancy


9
Question: The ease with which software can be understood, corrected, adapted, and enhanced best describes

A Maintenance

B Maintainability

C Adaptability

D Comfort level

E Installation


10
Question: Which of the following influences most of the costs associated with maintaining a system?

A Maintenance personnel

B Documentation quality

C Number of latent defects

D Number of customers

E Tools


11
Question: ____ describe what objects need to know about each other, how objects respond to changes in other objects, and the effects of membership in classes, superclasses, and subclasses.

A Aggregates

B Relationships

C Clusters

D Linkages


12 Not certain of answer
Question: The dependence of nonprimary key attributes on other nonprimary key attributes best describes a

A Relationship dependency

B Transitive dependency

C Weak attribute

D Weak entity

E Weak relationship


13
Question: A primary key should be null.

A True

B False


14
Question: A relationship between object classes best defines

A Encapsulation

B Scope

C Association

D Composition

E Integration


15 Your browser does not support inline frames or is currently configured not to display inline frames.


Question: Data-flow diagramming is one of several structured analysis techniques used to increase software development productivity.

A True

B False


16
Question: Referential integrity specifies that the value of an attribute of one relation depends on the existence of the same attribute in another relation.

A True

B False


17
Question: Which of the following functional capabilities are required for providing smooth and easy navigation within a form?

A Cursor-control capabilities

B Editing capabilities

C Exit capabilities

D Help capabilities

E All of the above


18
Question: During an inspection test, exactly what the code does is investigated.

A True

B False


19
Question: A relationship between the instances of one entity type is a

A Unary relationship

B Binary relationship

C Ternary relationship

D Singular occurrence

E Partnership occurrence


20
Question: When two relations, A and B, have a many-to-many relationship, we create a separate relation, C, to represent this.

A True

B False


21
Question: A relation is said to be in second normal form if the primary key consists of only one attribute.

A True

B False


22
Question: Where possible, text should appear in all uppercase on forms.

A True

B False


23
Question: Which of the following encompasses an object's properties and the values those properties have?

A Behavior

B Class

C State

D Encapsulation

E Incorporation


24
Question: Which of the following represents how an object acts and reacts?

A Behavior

B Class

C State

D Encapsulation

E Environment


25
Question: Which of the following provides an external interface to a class?

A Constructor

B Operation

C View

D Association

E Source


26
Question: During beta testing, users test a completed information system using real data in the real user environment.

A True

B False


27
Question: Which of the following is a true statement?

A The goal of conceptual data modeling is to capture as much of the meaning of data as is possible

B The efficiencies gained by maintaining systems at the rule rather than code level drastically reduce cost

C If a thorough repository of data descriptions is kept, the system can be regenerated as the business rules change

D The more details about data that we can model, the better the system we can design and build

E All of the above are true statements


28
Question: Changes made to a system to fix or enhance its functionality best defines

A Maintenance

B Support

C Repair

D Installation

E Coding


29

Question: When each nonprimary key attribute is identified by the whole key, the relation is said to be in at least

A Second normal form

B Third normal form

C Fourth normal form

D Fifth normal form

E A relational form


30
Question: The most complete acceptance testing will include

A Alpha testing, beta testing, and a walkthrough

B Beta testing, stub testing, and unit testing

C Desk checking, a system audit, and integration testing

D A system audit, system testing, and integration testing

E Alpha testing, beta testing, and a system audit


31
Question: During physical design, you consider

A The definitions of each attribute

B The descriptions of where and when data are entered, retrieved, deleted, and updated

C The expectations for response time and data integrity

D The descriptions of the file and database technologies to be used

E All of the above


32
Question: A context diagram shows the scope of the organizational system, system boundaries, external entities that interact with the system, and the major information flows between entities and the system.

A True

B False


33
Question: An object is an entity that has a well-defined role in the application domain, and has state, behavior, and identity.

A True

B False


34
Question: An association between the instances of one or more entity types that is of interest to the organization best defines

A Occurrence

B Relationship

C Natural connection

D Cardinality

E Entity link


35
Question: Highlighting methods should be consistently selected and used based upon the level of importance of the emphasized information.

A True

B False


36
Question: Use cases show the static structure of data and the operations that act on data.

A True

B False


37
Question: ____ is the transfer of information systems development, operation, or maintenance to an outside firm that provides these services, for a fee, on a temporary or long-term basis.

A Outsourcing

B Commission

C Subscription

D External provision


38
Question: A(n) ____ is a user interface that allows users to interact with graphical objects and pointing devices.

A HCI

B PCI

C UI

D GUI


39
Question: An identifier is a candidate key that has been selected as the unique, identifying characteristic for an entity type.

A True

B False


40
Question: Transitive attributes are attributes that determine other attributes.

A True

B False


41
Question: Combining all normalized user views into one consolidated logical database model refers to

A Normalization

B Requirements structuring

C File integration

D View integration

E Logic modeling


42
Question: A functional dependency between two (or more) nonkey attributes in a relation defines a

A Weak dependency

B Partial dependency

C Simple dependency

D Transitive dependency

E Recursive dependency


43

Question: The purpose of acceptance testing is to

A Determine if new requirements must be added to the newly completed system

B Determine if the system meets user requirements

C Determine if the system meets its objectives

D Test a completed information system using simulated data

E Test a completed information system using real data


44
Question: A candidate key that has been selected as the unique, identifying characteristic for an entity type is called a(n)

A Attribute

B Identifier

C Secondary key

D Gerund

E Index


45
Question: On a use-case diagram, a linking relationship arises when one use case references another use case.

A True

B False


46
Question: An arrow on a data-flow diagram represents a(n)

A Data store

B Data flow

C Process

D Source

E Action sequence


47
Question: Which of the following is not a rule for structuring data entry fields?

A Never require data that is already online or that can be computed

B Always provide default values when appropriate

C Data entries should not be justified

D Always place a caption adjacent to fields

E Provide context-sensitive help when appropriate


48
Question: One problem in a file processing environment is ____, which means that data common to two or more information systems is stored in several places.

A Rigid data structure

B Data integrity

C Referential integrity

D Data redundancy


49
Question: An object has certain ____, like the make, model, and color of a car.

A Keys

B Attributes

C Indices

D Packets


50
Question: A use case is a complete sequence of related actions initiated by an actor; it represents a specific way to use the system.

A True

B False


51
Question: During stress testing, the analysts try to determine how the system performs on the range of possible environments on which it may be used.

A True

B False


52
Question: In all cases, a network must use a ____, which is a set of standards that govern network data transmission.

A Protocol

B Hub

C Switch

D Router


53
Question: Which of the following is true regarding the context diagram?

A The process symbol is labeled "0"

B The context diagram contains two processes

C Data stores must be shown on the context diagram

D The internal workings of the system are shown on the context diagram

E The context diagram organizes the processes in a tree-like structure


54
Question: The primary deliverable for the conceptual data-modeling step within the analysis phase is an entity-relationship diagram.

A True

B False


55
Question: When displaying textual information, use abbreviations and acronyms as often as possible.

A True

B False


56

Question: In the accompanying figure, a ____ is a field or combination of fields that uniquely and minimally identifies a particular member of an entity.

A Primary key

B Common key

C Secondary key

D Combination key


57
Question: In a ____, a single communication path connects the network server, departmental servers, workstations, and peripheral devices.

A Hierarchical network

B Star network

C Bus network

D Ring network


58
Question: ____ is a widely used method of visualizing and documenting an information system.

A UML

B Java

C UNIX

D DFD


59
stion: A data ____, which is a framework for organizing and storing data, consists of one or more files or tables.

A Structure

B Roster

C Index

D Integral


60
Question: A use case participates in relationships with actors, not other use cases.

A True

B False


61
Question: Which of the following is a true statement?

A Data entities correspond to sources/sinks on a data flow diagram

B Relationships correspond to data flows on a data flow diagram

C A data entity will have many possible instances

D Verbs are used to name entity types

E An entity type is described many times in the data model


62

Question: A single occurrence of an entity type defines

A Entity instance

B Entity appearance

C Attribute

D Data element

E Multivalued attribute

six-column table for Bullseye Ranges includes the unadjusted trial balance

six-column table for Bullseye Ranges includes the unadjusted trial balance

Question

following six-column table for Bullseye Ranges includes the unadjusted trial balance as of December 31, 2005. Required
1. Complete the six-column table by entering adjustments that reflect the following information:
a. As of December 31, 2005, employees had earned $900 of unpaid and unrecorded salaries. The next payday is January 4, at which time $1,600 of salaries will be paid.
b. The cost of supplies still available at December 31, 2005, is $2,700.
c. The notes payable requires an interest payment to be made every three months. The amount of unrecorded accrued interest at December 31, 2005, is $1,250. The next interest payment, at an amount of $1,500, is due on January 15, 2006.
d. Analysis of the unearned member fees account shows $5,600 remaining unearned at December 31, 2005.
e. In addition to the member fees included in the revenue account balance, the company has earned another $9,100 in unrecorded fees that will be collected on January 31, 2006. The company is also

Accounting – Week Four Exercise Assignment

Accounting – Week Four Exercise Assignment

Question

Week Four Exercise Assignment

Liability

1. Payroll accounting. Assume that the following tax rates and payroll information pertain to Brookhaven Publishing:

· Social Security taxes: 4% on the first $55,000 earned per employee

· Medicare taxes: 1.5% on the first $130,000 earned per employee

· Federal income taxes withheld from wages: $7,500

· State income taxes: 4% of gross earnings

· Insurance withholdings: 1% of gross earnings

· State unemployment taxes: 5.4% on the first $7,000 earned per employee

· Federal unemployment taxes: 0.8% on the first $7,000 earned per employee

The company incurred a salary expense of $50,000 during February. All employees had earned less than $5,000 by month-end and no wages have been paid during the month.

a. Prepare the necessary entry to record Brookhaven’s February payroll. The entry will include deductions for the following:

· Social Security taxes

· Medicare taxes

· Federal income taxes withheld

· State income taxes

· Insurance withholdings

b. Prepare the journal entry to record Brookhaven’s payroll tax expense. The entry will include the following:

· Matching Social Security taxes

· Matching Medicare taxes

· State unemployment taxes

· Federal unemployment taxes

2. Current liabilities: entries and disclosure.A review of selected financial activities of Visconti’s during 20XX disclosed the following:

1-Dec: Borrowed $10,000 from the First City Bank by signing a 3-month, 15% note payable.

Interest and principal are due at maturity.

10-Dec: Established a warranty liability for the XY-80, a new product. Sales are expected to

total 1,000 units during the month. Past experience with similar products indicates

that 3% of the units will require repair, with warranty costs averaging $27 per unit (parts only).

22-Dec: Purchased $16,000 of merchandise on account from Oregon Company, terms 2/10, n/30.

26-Dec: Borrowed $5,000 from First City Bank; signed a 15% note payable due in 60 days. (Assume 360 day year for interest)

31-Dec: Repaired six XY-80s during the month at a total cost of $162

31-Dec: Accrued three days of salaries at a total cost of $1,400.

Instructions

a. Prepare journal entries to record the transactions.

b. Prepare adjusting entries on December 31 to record accrued interest for each of the notes payable.

3.Notes payable. Red Bank Enterprises was involved in the following transactions during the fiscal year ending October 31:

2-Aug: Borrowed $55,000 from the Bank of Kingsville by signing a 90-day, 12% note.

20-Aug: Issued a $50,000 note to Harris Motors for the purchase of a $50,000 delivery truck. The note is due in 180 days and carries a 12% interest r ate.

10-Sep: Purchased merchandise from Pans Enterprises in the amount of $15,000. Issued

a 30-day, 12% note in settlement of the balance owed.

11-Sep: Issued a $60,000 note to Datatex Equipment in settlement of an overdue account

payable of the same amount. The note is due in 30 days and carries a 14% interest rate.

10-Oct: The note to Pans Enterprises was paid in full.

11-Oct: The note to Datatex Equipment was paid in full.

30-Oct: Paid note to Bank of Kingsville.

Instructions

a. Prepare journal entries to record the transactions.

b. Prepare adjusting entries on December 31 to record accrued interest. (Daily interest is calculated utilizing the 360 day method).

c. Prepare the Current Liability section of Red Bank’s balance sheet as of December 31. Assume that the Accounts Payable account totals $203,600 on this date.

HRM590 final project

HRM590 final project

Question

Neel - Final Course Project Submission: Compensation Decisions – Due Week 7

Purpose:
To apply critical thinking skills in completing the employee process from job analysis to compensation based on performance. In Weeks 3 and 5, you submitted information to help you in completing the final project. Feedback was provided to assist you in maximizing points earned on this final paper. To properly complete this final project, you must include the instructor feedback provided to this final paper. You are now going to make compensation decisions based on performance.

CategoryCriteriaPoints
Compensation DecisionsMake compensation decisions and explain how you would compensate each of the employees with the budget dollars provided (see Compensation Template in Doc Sharing). You must provide substantiation for your salary decisions. Even with the decisions you make, what might be some consequences? Input your decisions into the template. Include your risk analysis.100
Literature ReviewThen, write a 6–10 page paper providing an overall review of the entire process created from job analysis to compensation. Would you change anything in your process at this point? Why? Why not? Include four scholarly articles related to compensation: two articles focused on general compensation and two articles on making compensation decisions. Do not use any verbiage/portion of your previously submitted article reviews from Written Assignments 1 or 2. This article review should be original to this final project assignment.100
Readability

Follow Guidelines and Best Practices sections below.

20
Deliverables

Submit the following:

  1. Compensation decisions with substantiation and risk analysis (100 points)
  2. Readability (20 points)
Total Points: 220

Guidelines

A quality paper will meet or exceed all of the following requirements. Reference the Grading Rubrics section for each assignment's specific point distributions. There is a Grading Rubric Template posted in Doc sharing (Excel® spreadsheet) identifying specific criteria. This spreadsheet will be used for grading assignments.

These assignments will be graded on the following criteria:

  • Paper follows instructions as outlined
  • Paper has topical flow with like subjects in each paragraph
  • Paragraph transitions are present and logical
  • Quality of research topic, quality of paper information
  • Proper use of citations
  • Proper grammar; punctuation, spelling, etc.
  • Page count follows guidelines
  • Sentences are complete, clear, and concise
  • Writing style follows appropriate graduate college level writing
  • Paper content is thorough, and information included is relevant and provides depth and clarity of theories as well as theory application
  • All key elements of the assignment are covered in a substantive way
  • Concepts are reviewed clearly, supported by specific details (examples or analysis)
  • Correct use of vocabulary and theory