Blog

Sup408 Case 1 – The online payments business is mobile

Sup408 Case 1 – The online payments business is mobile

Sup408 Case 1 – The online payments business is mobile

Subject: Business / General Business
Question
Chapter 11 Case 1
One of the fastest-growing segments of the online payments business is mobile payments. U.S. mobile
payments are expected to reach $140 billion by 2019 and purchases using mobile devices could account
for half of all online retail sales by 2017. Google introduced one of the first digital wallet products that
would work on a mobile device in 2011 when it also introduced support for the operation of NFC chips in
its Android mobile operating system. Google Wallet stores a MasterCard account for users that agree to
maintain a cash balance with the card’s issuing bank, so it operates essentially as a debit card. Google
Wallet does not charge a fee to merchants or the MasterCard issuing banks, nor does it charge a
transaction fee. Instead, it generates revenue from advertisers who pay to display ads, offer coupons or
other promotions (specific ads are displayed based on the mobile device’s proximity to the stores that
are making the offers). Google Wallet has been slow to catch on with users. In 2014, Apple introduced a
digital wallet product for its mobile devices called Apple Pay. In operation, Apple Pay is similar to Google
Wallet; however, the infrastructure and revenue model is different. Apple Pay charges the issuing banks a
fee of 0.05 percent of the transaction amount and guarantees each transaction; that is, if the transaction
is fraudulent, Apple will cover the loss. Credit card companies normally charge merchants a fee ranging
between 2 and 3 percent of the transaction amount, so the additional Apple Pay fee serves as a lowpriced insurance plan for them. Consumers will not be charged at all for using Apple Pay and will not be
given advertising messages. Further, Apple has stated that it does not collect information about
consumer buying habits from Apple Pay data. Apple arranged for American Express, Discover,
MasterCard, and Visa credit cards to be included in their system, along with a group of large card-issuing
banks. They also included major retailers such as Bloomingdales, Disney, Staples, Walgreens and Whole
Foods. These participants will be able to collect data on consumer buying habits, but only on those
consumers that use their card or shop at their stores. Apple reported that more than a million credit
cards were registered with Apple Pay in the first three days it was available. After Apple Pay’s
introduction, an increase in the number of retailers that accept NFC payments (as you learned in this
chapter, NFC technology is used by both Google Wallet and Apple Pay) caused an increase in the use of
Google Wallet.

QUESTIONS
1. Compare the benefits and drawbacks of Google Wallet and Apple Pay from a consumer’s standpoint, a
retailer’s standpoint, and a bank’s standpoint.
2. In 2015, Google announced the introduction of a new service called Android Pay. Using your favorite
search engine or the resources of your library, learn more about Android Pay and explain why you think
Google decided to develop this new product. In your answer, be sure to consider why Google also
decided to continue offering its Google Wallet product.
3. A product named CurrentC that combines mobile payments and loyalty benefits was announced in
2015 by the Merchant Content Exchange, a company owned by a consortium of large U.S. retailers.
CurrentC avoids the charges imposed by credit card issuers by using debit cards, but debit cards do not
provide the same level of fraud protection as credit cards. Using your favorite search engine or the
resources of your library, learn more about CurrentC and outline this product’s chances for success. Be
sure to include a discussion of the benefits and drawbacks of CurrentC in your answer.

4. Some banks are considering creating and offering a digital wallet product. Using your favorite search
engine or the resources of your library, learn more about these banks and their plans – evaluate the
likelihood of a bank’s success in introducing its own digital wallet.

MKTG 5317 CASE AND QUESTIONS

MKTG 5317 CASE AND QUESTIONS

MKTG 5317 CASE AND QUESTIONS

Subject: Business / Management
Question
BRUYNZEEL KEUKENS: MASTERING COMPLEXITY
NOVEMBER 2005, BRUYNZEEL KEUKENS HEADQUARTERS, BERGEN OP ZOOM, THE NETHERLANDS. A company board meeting was coming to an end. Jan Kessels was looking out of the window at the yellow company trucks being loaded with kitchen units ready for delivery. One of his fellow board members asked:
Are you actually suggesting we need to create a completely new supply chain?
“Yes, I am!” replied Kessels. He had been going through the myriad of strategic challenges facing the company. Strategically, Bruynzeel could no longer rely only on the construction market for growth. In order to grow and remain competitive, the company would have to adapt its kitchen cabinets to a different demand.
Bruynzeel’s objectives were twofold: to double its market share in the Dutch retail market and maintain its leadership in the construction market. These two goals would require heavy investment in terms of both capacity and flexibility to fulfill the growing share of the retail channel in Bruynzeel’s turnover. Retail customers were far more demanding than construction companies and increasingly requested custom solutions for the design of their kitchen. The mass production manufacturing set-up was no longer up to this task, it had to evolve.
Everyone on the board agreed with the idea of restructuring the supply chain. Bruynzeel was at a critical point in its history. The only remaining question was, how far should they go in the reorganization? Should they simply modify a few processes here and there or should they redefine the entire strategy from scratch? The discussion grew louder as every member of the board gave their opinion on what to do next.
Company Background
The Bruynzeel Company was created in the Netherlands in 1897 and specialized in carpentry, wooden floors and shipbuilding. In 1937 it also began to manufacture kitchens. In 1982, when it went bankrupt, Bruynzeel Keukens BV was created and began to compete in the low- and medium-range kitchen market in the Netherlands.
In 2004 sales reached nearly €108 million and were expected to grow by 12% (in value) for 2005. The company had almost 500 employees, 350 of which worked in production and order administration. Most of its turnover was made in business-to-business (construction market) and the remainder in retail.
Bruynzeel’s success was based on three key factors: The first was excellent brand recognition in the Netherlands – 93% of Dutch customers were familiar with the brand; the second was the trust given by the construction industry – Bruynzeel was market leader in the Dutch construction market in 2004; and finally, a proven track record for the quality, reliability and performance of its kitchens.

Dutch Kitchen Industry
After a period of consolidation in the Dutch kitchen market, by 2005 only three main national manufacturers remained. Bruynzeel was the market leader with a market share of 23% in volume and the second player was half its size. At the time, the Dutch kitchen industry was exporting €300 million to Germany and in turn, German manufacturers were exporting about the same volume to the Netherlands. With only 20 kitchen factories in the country, competition sourced some of its production from one of the 180 active German factories.
With about 2,000 stores, the Dutch kitchen market was saturated and Bruynzeel’s management wanted to expand sales outside the Netherlands. Being the Dutch market leader was no longer sufficient; judging from the concentration of manufacturers in the European market, it was becoming apparent that the company’s long-term survival and its independence relied upon its capacity to grow.
Bruynzeel’s first attempt to go international was exporting just over the border to Belgium, less than 10 km from its plant. Belgium’s market characteristics were different enough from those of the Netherlands to enable Bruynzeel to have a good first export experience. Unlike the Dutch market, the Belgium market was still very fragmented.
Market Strategy
The Construction Market
Over the years, Bruynzeel had earned a very good reputation and the trust of most construction companies in the Netherlands. By the end of 2005, it was the market leader in B2B in the Netherlands. Its market share was about 56% and rising. However, the company’s management did not want to exceed 60% market share. The B2B channel was not part of its growth strategy.
The Dutch construction market was different from other countries. For example, houses were delivered “turnkey.” Even for the rental market, houses and apartments had kitchens that were fully furnished at the landlord’s expense. The tenant could even choose the kitchen within a certain price range. By 2005, the trend in the Dutch kitchen market was for the customer to ask for more and more extras. Generally, the landlord would agree to this as long as the tenant was willing to pay any additional costs out of his own pocket. He could then go to a Bruynzeel store and choose the kitchen and accessories he wanted.
The Retail Market
In 2005 Bruynzeel was making 31% in retail stores and 14% in wholesale. By October, the company owned 23 stores, 4 of which had been created in 2004. Its market share in the retail channel was between 3% and 4% and the company’s goal was to double this within five years. In 2000 the company launched a new store concept, different from a traditional kitchen store, which would enable the client to have a “fun” experience. The new layout had a big central kitchen with tables where clients could sit, relax and have a drink. Chefs were invited to present recipes and actually cook in this large kitchen. Around this central kitchen were different “universes,” one for each line of kitchens. Every time a client entered the store, a hostess would come to him and direct him to a salesperson. The concept worked so well that 80% of the clients who sat with a salesperson would eventually buy a kitchen.
There were several reasons for expanding Bruynzeel’s retail market. The first was strategic – the company was becoming ever more dependent on the construction market, if one or two of its bigger B2B customers were to move toward the competition, it could have a dramatic effect on the company’s financial results. Furthermore, there was the profitability issue; selling kitchens in the retail market was far more profitable than selling them in the construction market. For instance, the average selling price of a fully equipped kitchen in the retail branch was 29 times higher than the standard white kitchen cabinets for the rental market (refertoFigure 1 below).
.0/msohtmlclip1/01/clip_image002.png”>
While Bruynzeel Keukens had traditionally seen itself as a kitchen manufacturer, the latest trends proved this vision wrong since the company was now in fact more of a kitchen seller. Such a transition in strategic vision did not come without issues and also meant making changes in the company’s operations, from purchasing and manufacturing to logistics and distribution – everything would have to be restructured.
Operations
Strategic Change
Although Bruynzeel Keukens had been very successful at selling kitchens, this improvement in its commercial performance made it clear to the management that its operations had to improve dramatically to maintain those good results. When asked about the company’s number one problem, the members of Bruynzeel’s management team would reply unanimously, “Logistics!” The market dynamics had changed and so had the company’s positioning.
Lead Time
One of the main problems for Bruynzeel was that synchronization between up-and downstream supply chains was poor. Customers were increasingly asking for better delivery performance but suppliers could not necessarily follow the trend. It was a difficult situation for the company. On average, the supplier lead-time of four weeks was twice as long as what the customer required. Rush-in orders could also be entered into the system without prior notice from the sales department. This resulted in a logistical nightmare for the plant operations manager. With the ever-changing demand, keeping a sufficient level of the right stock-keeping units (SKUs) was extremely difficult. The company had to serve two types of customers with different delivery requirements. Construction customers were easier to serve; the lead-time to deliver to a house or an apartment was 20 weeks on average – there was plenty of room for rescheduling. Retail customers, however, were much more demanding and rescheduling was more difficult. To compensate for this uncertainty, production people tended to build up stocks.
Although this was a fairly acceptable short-term solution to fulfilling customer demand, it also involved several disadvantages. First, building stock cost money through inventory carrying costs. Second, the shorter product lifecycle resulted in raw materials and higher value semi-finished products rapidly becoming obsolete. By 2005, about 50% of the product offering was changing on a yearly basis. This led to another dilemma: On the one hand, the company had to lower its costs and face ever-faster product lifecycles and on the other, it had to make sure that it had enough SKUs available to support customer demand and 10 years’ worth of product warranties. The complexity was increasing daily and the company had to do something about it –fast!
Variety
One of Bruynzeel’s main competitive advantages was the extent of its offering. Each client could customize his kitchen the way he wanted, from the color of the cupboard to the style of the door handle – the possibilities were endless. For the basic kitchen line alone, there were more than 40 million different combinations. However, this advantage also had its drawbacks. The logistics necessary to handle such a complex manufacturing process were also becoming more difficult each day. As Kessels said:
We should be able to makeour problems our suppliers’ problems.
A possible solution was to push the complexity upstream and let suppliers deal with it. Yet they were usually reluctant to insource complexity, and some were just not able deal with it. The purchasing department would have to find the right partners able to carry out this new mission.
Purchasing Strategy Implementation
By the end of 2005, following a new purchasing plan, the procurement team dealt directly with 300 suppliers out of 1,400, from an original pool of 1,800. It used ABC classification to rank the active suppliers: 26 were “A” suppliers with a spending of greater than €500,000 (the total “A” supplier spending represented 70% of the total spending); and 48 were “B” suppliers representing 20% of the spending. The spending per supplier was between €200,000 and €500,000.
The main criteria used to rate suppliers were logistics (on- time delivery), price and quality (number of defects). By this time, the purchasing department had been working on setting up partnerships with the top eight suppliers.
Kraljic Matrix
The other major tool used to classify suppliers was the Kraljic matrix (see below). The matrix was made of four quadrants and two axes (volume and risk). Each supplier fell in one of the quadrants.
.0/msohtmlclip1/01/clip_image004.png”>
Strategic Quadrant
This quadrant included suppliers with high volume and high delivery risk. Most of the strategic suppliers were “A” suppliers with only a few “B” suppliers. These were very important to Bruynzeel and there was a clear need for close partnership with them.
Leverage Quadrant
Bruynzeel purchased a lot from leverage suppliers, yet the delivery risk was much lower than it was with strategic suppliers; therefore close monitoring was not needed. Leverage suppliers could be either “A” or “B.”
Bottleneck Quadrant
This quadrant represented a problem to the purchasing department, since these were the suppliers with high delivery risk and low volume. Bruynzeel could not have a great impact on these suppliers since the volumes it purchased from them were small. Suppliers in this quadrant were best avoided.
Routine Quadrant
The suppliers in this quadrant had both a low turnover and a low delivery risk. The purchasing team would only look into this quadrant once in a while, unless the company was experiencing delivery problems.
Description: macbook hd:users:enriquerodriguez:desktop:screen shot 2017-04-27 at 7<a href=.42.02 pm.png” src=”file:///C:/Users/Pals/AppData/Local/Temp/OICE_2D051F82-5DE6-49FD-A168-D737E80E38CD.0/msohtmlclip1/01/clip_image006.png”>
Time for Change
The Bruynzeel management team had gone through a long process of identifying the key issues facing the company, listing possible solutions and implementation strategies. Supply chain management was undoubtedly on top of the list. The team needed to take important decisions fast; it could not afford to lose any more time in streamlining the supply chain. However, since Bruynzeel’s supply chain was bigger than the company itself, it was possible that suppliers could help the company manage the necessary changes. Management simply needed to identify those suppliers and ensure that cooperation would follow. What exact processes and functions should be reorganized? More importantly, how far should Bruynzeel’s management push the supply chain redesign? Would supplier involvement be absolutely necessary for success? If so, what would be the right approach?
Bruynzeel Financial Results
.0/msohtmlclip1/01/clip_image008.png”>
.0/msohtmlclip1/01/clip_image010.png”>
Questions:
1. What market segments does Bruynzeel Keukens serve? Explain how the market has changed for Bruynzeel Keukens. How has this caused problems in their supply chain and logistics?
2. What is lead time? How is lead time different for the two markets that Bruynzeel Keukens is serving? How does variety impact lead time?

3. Deconstruct the process that Bruynzeel Keukens used to reduce the number of suppliers from 1,800 to 1,400:
How did they determine which 300 they would deal directly with? Explain the Kraljic Matrix that they used. How did they determine the four quadrants and what did they decide to do with each?
Make sure to explain the steps that you think they had to take to create this plan, even if they are not directly stated in the case. For example, if you think they used a spreadsheet – what would this spreadsheet look like.

A single $300 cash inflow at the end of year 5

A single $300 cash inflow at the end of year 5

A single $300 cash inflow at the end of year 5

Subject: Business / Accounting
Question
19-20 and 19-23 from AIBD book 1. QUESTION 1
The following are four sets of cash flow:
a) A single $300 cash inflow at the end of year 5.
Determine the present value of each of the sets of cash flows using a discount rate of 10%. 1 points QUESTION 2 1. The following are four sets of cash flow: b) A series of $600 cash inflows at the end of years 1, 2, 3, 4, and 5.
Determine the present value of each of the sets of cash flows using a discount rate of 10%. 1 points QUESTION 3 1. The following are four sets of cash flow: c) A cash inflow of $400 at the end of year 3 and a cash inflow of $500 at the e nd of year 5.
Determine the present value of each of the sets of cash flows using a discount rate of 10%. 1 points QUESTION 4 1. The following are four sets of cash flow: d) A series of cash outflows of $80 at the end of years 1 through 10.
Determine the present value of each of the sets of cash flows using a discount rate of 10%. 1 points QUESTION 5 1. The McKenzie Company is considering buying a machine that would increase the
company’s cash receipts by $2,200 per year for five years. Operation of the machine would
increase the company’s cash payments by $100 in each of the first two years, $200 in
the third and fourth years, and $300 in the fifth year. The machine would cost $6,000 and
would have a residual value of $500 at the end of the fifth year.
Compute the present value of the cash receipts and cash payments for the first five years.
Assume a required rate of return of 16%. 1 points QUESTION 6 1.
The McKenzie Company is considering buying a machine that would increase the company’s cash receipts by $2,200 per year for five years. Operation of the machine would increase the company’s cash payments by $100 in each of the first two years, $200 in the third and fourth years, and $300 in the fifth year. The machine would cost $6,000 and would have a residual value of $500 at the end of the fifth year.
Compute the present value of the cash payment today. Assume a required rate of return of 16%. 1 points QUESTION 7 1.
The McKenzie Company is considering buying a machine that would increase the company’s cash receipts by $2,200 per year for five years. Operation of the machine would increase the company’s cash payments by $100 in each of the first two years, $200 in the third and fourth years, and $300 in the fifth year. The machine would
cost $6,000 and would have a residual value of $500 at the end of the fifth year.
Compute the net present value of the investment. Assume a required rate of return of 16%. 2 points QUESTION 8 1.
The McKenzie Company is considering buying a machine that would increase the company’s cash receipts by $2,200 per year for five years. Operation of the machine would increase the company’s cash payments by $100 in each of the first two years, $200 in the third and fourth years, and $300 in the fifth year. The machine would
cost $6,000 and would have a residual value of $500 at the end of the fifth year. Based on the previous calculations, should McKenzie Company make the investment?
Yes
No

 

HSM 430- _______ data are those that are owned by someone else

HSM 430- _______ data are those that are owned by someone else

HSM 430- _______ data are those that are owned by someone else

Subject: Business / Marketing
Question
Question 1.1. (TCO 6) _______ data are those that are owned by someone else, typically free or inexpensive, that have potentially unknown quality. (Points : 5)

Secondary

Primary

Internal

External

Question 2.2. (TCO 6) A number of demographic factors have been shown to impact healthcare utilization. For example, _____ are more aware of available health services and are quicker to turn to health professionals when symptoms arise. (Points : 5)

Latinos

the elderly

men

women

Question 3.3. (TCO 7) South Baptist Healthcare Center is monitoring the increase in use of social media among the population. This trend is part of the _____ component of the external environment analysis. (Points : 5)

competitive

legal/regulatory

economic

technological

Question 4.4. (TCO 7) As part of the ______ audit, a healthcare marketer examines competitors, market position, and market share. (Points : 5)

external

internal

financial

community health

Question 5.5. (TCO 8) In order to answer the research question regarding the speed of service in the emergency department, Northeast Hospital observes the actions of research subjects through a recording device. This primary data collection method is known as a(n) ______. (Points : 5)

personal interview

focus group

survey

observation

Question 6.6. (TCO 8) Advantages of a ______ survey is that it is a relatively quick way to acquire information and generally results in a higher response rate. (Points : 5)

mail

phone

computerized

personal

Question 7.7. (TCO 9) The goals of the ______ plan are driven or guided by the goals of the _____ plan. (Points : 5)

marketing, strategic

business, marketing

strategic, marketing

strategic, operational

Question 8.8. (TCO 9) In the ______ stage of the marketing planning process, healthcare marketers collect and analyze data regarding trends in internal and external environments. (Points : 5)

environmental analysis

goal and objective development

strategy development

evaluation

Question 9.9. (TCO 10) In the development of the _______ , the healthcare marketer seeks to gain an in-depth understanding of the organization’s products and services and the manner in which customers are served. (Points : 5)

internal audit

external audit

marketing evaluation

situation analysis

Question 10.10. (TCO 10) Using the _____ budgeting method, the healthcare marketer would utilize the marketing plan strategies to develop projections for the current year’s budget. (Points : 5)

competitive parity

percentage of sales

objective and task

all you can afford

A marketer is considering introducing several

A marketer is considering introducing several

A marketer is considering introducing several

Subject: Business / Marketing
Question
Section I: Please clearly indicate your response as “T” if the statement is correct or “F” if it is incorrect. Each statement is valued at 2 points.

1. A marketer is considering introducing several kiosks through which the firm’s products may T or F be viewed and sold. This represents the “Place” variable within the marketing mix.

2. A key element of the marketing concept is establishing short-term, profitable customer relationships. T or F

3. The Product Life Cycle (PLC) reflects the stages that an individual product category experiences T or F

over time.

4. “Branding” includes the use of trademarks, images and brand names to identify a product or company.T or F

5. The marketing mix variables are non-controllable factors within an organization’s marketing strategy. T or F

6. A service is not a “Product” because services do not include any physical good. T or F

7. The demand for business products derives from the demand for final consumer products. T or F

8. The Internet is making it possible for firms to reach customers that were impossible to reach before. T or F

9. A wholesaler might help a producer by reducing the producer’s need to carry large inventory stocks. T or F

10. Water carriage offers marketers the least amount of transportation capacity. T or F

11. Appliances, furniture and consumer electronics products would typically use exclusive distribution. T or F

12. Commercialization and launch of a new or modified product refer to the same marketing action. T or F

13. As discussed in class, “Chaps” and “Old Navy” are examples of a “fighter” brands. T or F

14. Diffusion is our personal acceptance of a new product or new idea. T or F

15. For exchange to occur, there must always be a financial transaction or agreement. T or F

Section II: Please select the best answer from among the alternatives provided for each question or statement. Each item is valued at two (2) points.

1. A consumer is shopping for a new pair of jeans. He/she has had good experiences with GAP jeans in the past and is looking for GAP now. The consumer will buy GAP if he/she finds some that are at least as good-looking as competitive jeans. This is a good example of:

A. Brand rejection

B. Brand non-recognition

C. Brand preference

D. Brand denial

2. Industry sales are highest in which of the following product life cycle stages?

A.Market maturity

B. Sales decline

C. Market introduction

D. Market growth

3. In “traditional channel systems,” the channel members:

A. Always take title of the goods.

B. Usually have a common ownership.

C. Are now working more closely together (partnerships) to improve customer satisfaction and service quality.

D. Are always controlled by penalties and threats.

4. If a marketing manager wanted to ship small quantities (less than 1000 pounds) of high-value, electronic products over short distances at an economical cost, which of the following modes should be used?

A. Pipelines

B. Railroads

C. Trucking companies

D. Inland waterways

5. Which of the following channel intermediaries always take ownership (title) to the goods they carry?

A. Service wholesalers

B. Merchant wholesalers or distributors

C. Selling agents

D. Manufacturer’s Representatives

6. This stage of the Product Life Cycle (PLC) shows the highest industry profits/unit sold for a specific product category:

A. Market Introduction

B. Market Growth

C. Market Maturity

D. Market Decline

E. None of the above

7. The process used to “break down” a large group of potential, heterogeneous customers into smaller groups having

similar characteristics is called ________________:

A. Positioning

b) Competitive bidding

c) Segmentation

D. Convergence

E. Reduction

8. When a manufacturer (e.g., Rolex) chooses to market its products through one retailer within a

particular geographic area, this strategy is described as:

A. Normal distribution

B. Exclusive distribution

C. Selective distribution

D. Intensive distribution

E. Minimalization

9. The use of U.S. Census data to develop information about a prospective target market is:

A. Primary market research

B. Diffusion

C. Positioning

D. Secondary market research

10. ____________________ is the consumer decision process typically associated with consumption of products

and services that are costly and represent a significant risk to the purchaser:

A. Routine rebuy

B. Limited problem-solving

C. Dissonance

D. Extensive problem-solving

11. The coordination of all internal/external activities associated with the movement of goods is referred to

as___________________:

A. Diffusion c) Adoption

B. Supply Chain Management d) Time utility

12 ________________ is typically used to describe all the activities associated with making products available

for the final consumer?

A. Wholesaling c) Product Life Cycle (PLC)

B. Physical Distribution d) Retailing

13 When a manufacturer uses no intermediaries to reach the final customer, we describe this strategy as

_______________?

A. Advertising d) Monopolistic marketing

B. Direct Selling/Channel e) Intensive distribution

E. Exclusive distribution

14: When a manufacturer uses only a few intermediarieswithin aspecific geographic region, it is using a

___________ strategy?

A. Selective distribution c) Exclusive distribution

B. Intensive distribution d) Diversification

15: These goods are likely to be marketed using an “intensive” distribution strategy:

A. Convenience goods (ie., snacks) c) Appliances and other durables

B. Luxury goods d) Automobiles

16: Which of the following organizations has achieved a competitive advantage due to their strong distribution and

inventory management systems:

A. US Postal Service d) Yellow Freight Lines

B. Pella Windows e) “Just Born” Candies, Inc.

E. Wal-Mart

17: The establishment of mutually, beneficial relationships focused upon meeting customer needs and earning a

profit is called ___________________?

A. Product development c) Differentiation

B. Competitive advantage d) Marketing Concept or Orientation

18: These variables represent the only factors under the control of a marketer:

A. Economy c) Competitors

B. Marketing Mix d) Government

19: Consumers’ willingness to accept a new idea or try a new product or service is called _____________?

a) Innovation c) Weakness

b) Experimentation d) Adoption

None of the above

20: The __________________stage of the Product Life Cycle (PLC) is typically characterized by little sales growth

and intense competition among producers for revenues. Competitive advertising and pricing incentives are used

to gain market share.

a) Market Decline c) Market Maturity

b) Market Introduction d) Market Growth

Section III: Please select the best answer to complete each statement. Each item is valued at two (2) points.

Market development Competitive advantage Market penetration

Scrambled merchandising Retailing Intensive distribution

Convenience products Railroad Specialization/Division of Labor

Trucking Advertising Exclusive distribution

Specialty products Generic Brand Secondary data

Selective distribution Primary data Wholesaling

____________________________ reflects that intermediaries in the distribution channel become “expert” at performing certain distribution functions.

_____________________ describes all the activities associated with the sale of products and services to final consumers.

When a manufacturer sells only through one intermediary in a particular geographic area, ________________ ______________________ is being used.

__________________________ is a type of data developed specifically for a user’s purpose.

A producer has a marketing mix that is perceived to be better than competitor offerings. This is referred to as _____________________________.

A marketing strategy that is focused upon new markets and customers for existing products is called ___________________________________.

_______________________________ are branded products which customers request by name.

_________________________________ is selling a product through all responsible and suitable intermediaries who will stock and/or sell the product.

If a producer wished to ship a large volume of salt to a land-locked (no water access) receiver at the lowest cost, the ___________________ mode of transportation would likely be used.

____________________________ are products a consumer needs but isn’t willing to spend much time and effort shopping for.

Section IV. Answer only two (2) of the following four (4) questions completely. Each question is worth five (5) points. Answer only two questions. No extra credit will be given for additional answers.

1. List and describe the three functions performed by intermediaries in the distribution channel. Give an example of

each function. Or,

2. Identify and describe the three types of distribution intensity strategies available to marketers. Give an example of a

product that would be associated with each strategy. Or,

3. Name and describe the five factors that influence the adoption process for a new product or idea. Or,

4. Identify the five (5) characteristics that make a service product different from a physical good product. Please explain each characteristic.

 

On August 2, 2004, Jerry Andrews, a dentist,

On August 2, 2004, Jerry Andrews, a dentist,

On August 2, 2004, Jerry Andrews, a dentist,

Subject: Business / Accounting
Question
On August 2, 2004, Jerry Andrews, a dentist, opened a dental office. The following transactions were completed during the first month of operations:

Aug 2 Jerry invested $20,000 cash and $13,200 worthNites of dental equipment in the business in exchange for common stock in a new corporation called J.A. Dentist, Inc.

Aug 3 Paid two months’ rent of $2,000.

Aug 4 Purchased $1,000 of dental supplies and paid cash.

Aug 4 Paid insurance premiums of $3,600 for a 1-year insurance policy.

Aug 6 Earned and collected dental fees of $14,600 in cash during the week.

Aug 9 Paid secretary a salary of $1,200.

Aug 10 Purchased $300 of dental supplies on account.

Aug 11 Purchased an automobile for business use. It cost $13,000. Jerry paid $3,000 cash and signed a note payable for the balance.

Aug 13 Received a $240 telephone bill that will be paid later in the month.

Aug 13 Billed customers $6,000 for dental fees earned during the week.

Aug 16 Received a $150 electric bill that will be paid later in the month.

Aug 18 Paid $300 for dental supplies purchased on Aug 10.

Aug 20 Earned and collected dental fees of $4,500 in cash during the week.

Aug 23 Paid secretary a salary of $1,200.

Aug 23 Received a $75 water bill that will be paid in September.

Aug 24 Paid $450 for advertising in a local newspaper.

Aug 25 Received $2,500 from customers on account.

Aug 27 Paid a dividend of $3,500 to Jerry Andrew the sole stockholder.

Aug 30 Paid the telephone and utility bills.

Aug 30 Billed customers $2,000 for dental fees earned during the week.

Aug 31 Received $1,500 from customers on account.

See next page…

Required:

1. Record the general journal entries for August 2004 transactions on the Journal Pages tab within the Excel Template (you may omit account descriptions and posting references).

2. Post the general journal entries on the General Ledger tab.

3. Prepare the trial balance to record the accounts’ ending balances as of August 31, 2004 on the Trail Balance tab.

4. Record the adjusting entries on the Journal Pages tab and then post the adjusting entries to the general ledger on the General Ledger tab. Take the following transactions into consideration:

a. Dental supplies on hand at the end of the month amount to $350.

b. Make adjusting entry for the insurance premiums expired.

c. Accrued $840 for salary earned that will be paid in September.

d. Do you need an adjustment for rent expense?

e. Ignore depreciation for this month. No adjustment needed.

5. Prepare the adjusted trial balance to adjust the accounts that were affected as of August 31, 2004 on the Adjusted Trail Balance tab.

6. Prepare the Financial Statements (Income Statement, Statement of Retained Earnings and Balance Sheet) as of August 31, 2004 on the Financial Statements tab.

7. Since August 31, 2004 is the end of the fiscal year, record the closing entries on the Journal Pages tab and thenpost the closing entries to the general ledger on the General Ledger tab.

8. Prepare a post-closing trial balance to close the accounts that were affected as of August 31, 2004 on the Post-Closing Trail Balance tab.?

 

Describe the current structure of your organization using

Describe the current structure of your organization using

Describe the current structure of your organization using

Subject: Business / Marketing
Question
Write a 800- to 1050-word paper that does the following:
•Summarizes your background and what makes you unique in a 1-paragraph elevator pitch
•Identifies 3 to 4 companies you want to work for, and an explanation as to why
•Identifies the best methods for contacting those companies and engaging those who might influence the hiring decision

Format your paper consistent with APA guidelines.

City Cycles has just started selling the new XYZ-10 mountain bike

City Cycles has just started selling the new XYZ-10 mountain bike

City Cycles has just started selling the new XYZ-10 mountain bike

Subject: Business / Management
Question
1. City Cycles has just started selling the new XYZ-10 mountain bike, and below are the monthly sales. Amit wants to forecast by exponential smoothing (setting February’s forecast
equal to January’s sales) with alpha = 0.1
Barbara wants to use a 3-period moving average.
Sales Amit Barbara Amit error Barbara Error
January 400
February 380 400
March 410
April 375
May
1. a) Is there a strong linear trend in sales over time?
2. b) Fill in the table with what Amit and Barbara each forecast for May and the earlier
months, as relevant.
3. c) Assume that May’s figure turns out to be 405. Append the table with error columns then
calculate MAD for both Amit’s and Barbara’s method. (16.11 and 19.17)
4. d) Based on these calculations, which method seems more accurate?

 

Computer Assisted Audit Techniques Tools and Techniques (CAATTS) are gaining popularity in the audit profession

Computer Assisted Audit Techniques Tools and Techniques (CAATTS) are gaining popularity in the audit profession

Computer Assisted Audit Techniques Tools and Techniques (CAATTS) are gaining popularity in the audit profession

Subject: Business / Accounting
Question
Computer Assisted Audit Techniques Tools and Techniques (CAATTS) are gaining popularity in the audit profession. CAATs is the practice of using computers to automate the audit processes.These tools are being used to assist internal auditors when searching for irregularities in data files, helping internal accounting departments to do more detailed analysis, and helping the forensic accountant with extrapolate large amounts of data for analysis and fraud detection. CAATTS are used to automate the data analysis process

You are a member of the internal audit team for your manufacturing company that handles hazardous materials. Your team has recently been tasked with working with the chemical specialist who identified hazardous compounds for which your company should ensure proper storage and handling procedures are in place; you are to ensure that employees are following those storage and handling procedures.

Since you will be working with the chemical specialist for development of the list of hazardous compounds, describe the process you would go through to verify that each compound is stored properly, that employees are not in danger, and that risk has been mitigated using CAATTS. Include recommendations for continuous audit steps to assure the CEO that no risks are present.